• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.30-33
• /
• 2001

Advantages of switched reluctance motor(SRM) drives make it an attractive candidate for replacing adjustable speed ac and do drives in both industrial and consumer applications. Furthermore, a simple, low cost and robust SRM drive can be efficiently operatied ill the hostile environment of an automobile. In this paper, novel topology for fast response of various load is proposed. Proposed topology adapts anti-windup PI controller at increasing speed referense and activate braking mode at decreasing speed and forward load, Experiental results show that proposed topology have fast response charecteristics at increasing and decreasing speed reference.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.175-176
• /
• 2007

본 논문은 매입형 영구자석 동기 전동기의 준 식스스텝 운전(Quasi six-step operation)을 위한 약자속 제어에 대한 새로운 방법을 제안한다. 제안된 방법은 전향 경로(feedforward path)와 궤환 경로(feedback path)로 구성되고 전향 경로는 1차원 참조표로 구성되며 궤환 경로는 전류제어기 출력과 과변조에 의해 제한된 전압의 차이를 이용한다. 제안된 방법을 통해 약자속 제어와 안티 와인드업(anti-windup) 제어가 동시에 이루어질 수 있다. 또한 제한된 직류단 전압 조건에서 식스 스텝(six-step) 운전에서 낼 수 있는 전동기의 최대 토크에 가까이 출력 토크를 발생시키면서 전류 제어를 계속할 수 있는 준 식스 스텝 운전이 가능하다. 제안된 방법의 유효성을 컴퓨터 시뮬레이션과 실험의 결과를 통해 입증하였다.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.265-266
• /
• 2014

전기자동차에 적용되는 배터리 전압은 배터리의 용량, 크기, 중량 및 가격 등과 같은 사항에 의해 제한을 가진다. 따라서 전기자동차 구동을 위해 전류 제어를 수행할 경우 배터리 전압 제한에 따라 제어기의 포화가 발생할 수 있고, 이는 와인드업 현상을 야기한다. 와인드업 현상은 울렁거림 현상, 큰 오버슈트 및 느린 정착 시간과 같은 과도상태 응답 특성을 저하시키고 심각할 경우 시스템의 불안정을 초래한다. 자동차의 특성상 가 감속 및 정지, 출발과 같이 급변하는 기준 명령의 변화가 빈번하기 때문에 승차감 및 안정성에 있어 과도상태의 응답 특성이 매우 중요하다. 따라서 본 논문에서는 전기자동차용 유도전동기를 위한 반포화 적분-비례 제어기를 제안하고, 실험을 통해 제어 성능의 우수함을 보인다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.54.4-54
• /
• 2001

This paper proposes an adaptive control scheme for an autopilot design of Relaxed-Static-Stability(RSS) Missiles with saturating actuator. The feedback linearization controller eliminates nonlinear terms in RSS missile dynamics and makes the entire system linear. But modeling errors, disturbances and the nonlinear mismatch due to input constraints exert a bad influence on the performance of the feedback linearization controller Thus, first, we derive a parametric affine uncertainty model with modeling errors and disturbances. Then an adaptive control law with anti-windup scheme is developed, where the bounds of uncertainties are estimated with adaptive laws. The proposed adaptive controller can remove the bad effects of uncertainties, of disturbances, and of saturating actuator ...

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.171-178
• /
• 1998

This paper proposes a new overmodulation strategy to give a better voltage utilization by tracking voltage vector along hexagon sides. This strategy enables the inverter to control both magnitude and angle of current. Therefore, the vector control using this strategy can lead to better output torque dynamics compared to the conventional slip frequency control with six-step voltage, which is widely used in the traction drive. In this strategy, the d-axis output voltage of a current controller to control the flux is conserved and the q-axis output voltage to control the torque is controlled to place the voltage vector on the hexagon boundary In case of overmodulation. The limited q-axis voltage is used for anti-windup of q-axis current controller. This paper also presents a new field weakening scheme which incorporate the proposed overmodulation strategy. In this scheme, the flux level is selected by both required current limit and the available maximum voltage along hexagon sides. The validity of the proposed overall scheme is confirmed by the computer simulations for a typical traction drive with a 210[㎾] induction motor.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.10
• /
• pp.865-871
• /
• 2015

This study was conducted in order to develop a finger exoskeleton system using ionic polymer metal composites (IPMCs) as the actuator and sensor in a hybrid structure. To use the IPMC as an actuator producing large force, a first order transfer function was obtained using results from a block force for DC excitation that applied to two IPMCs of 20mm-width, 50mm-length, and 2.4mm thickness together. After which the validation of 200gf control with anti-windup PI controller was confirmed. A 5mm-width, 50mm-length, 0.6mm-thickness of IPMC was also modeled as a sensor for tip displacement. As a result, the IPMC sensor could been utilized as a trigger role for the actuator. Finally, an IPMC sensor and actuator were installed on the joint of a single DOF exoskeleton in the hybrid structure, and test for the control of 40gf of block force and predefined sequence of motion was performed.

• Journal of Biosystems Engineering
• /
• v.34 no.5
• /
• pp.305-314
• /
• 2009

The purpose of this paper was to design an effective control system of 1-axis exciter for a seat vibration test of agricultural tractors using MATLAB simulation. The developed simulation model was composed with a hydraulic pump, a hydraulic servo valve, a hydraulic cylinder and load system. Also it was verified by comparing the simulation results with experimental results of actual control system in order to optimize the control performance. And in order to improve its control performance, the designed PID controller in this research was tuned using Ziegler-Nichols 2nd law and zero's moving method of PID controller's transfer function. As the result of these research, the developed position control system was able to control the system's position accurately within 5% errors.

• Journal of Power Electronics
• /
• v.12 no.4
• /
• pp.623-631
• /
• 2012

In this paper, a digital controller design procedure is presented for single-phase voltage-doubler boost rectifiers (VDBR). The model derivation of the single-phase VDBR is performed in the s-domain. After that the simplified equivalent z-domain models are derived. These z-domain models are utilized to design the input current and the output dc-link voltage controllers. For the controller design in the z-domain, the traditional K-factor method is modified by considering the nature of the digital controller. The frequency pre-warping and anti-windup techniques are adapted for the controller design. By using the proposed method, the phase margin and the control bandwidth are accurately achieved as required by controller designers in a practical frequency range. The proposed method is applied to a 2.5 kVA single-phase VDBR for Uninterruptible Power Supply (UPS) applications. From the simulation and the experimental results, the effectiveness of the proposed design method has been verified.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.9
• /
• pp.839-845
• /
• 2013

A CSTR (Continuous Stirred Tank Reactor) is a highly nonlinear process with varying parameters during operation. Therefore, tuning of the controller and determining the transition policy of controller parameters are required to guarantee the best performance of the CSTR for overall operating regions. In this paper, a methodology employing the 2DOF (Two-Degree-of-Freedom) PID controller, the anti-windup technique and a fuzzy gain scheduler is presented for the temperature control of the CSTR. First, both a local model and an EA (Evolutionary Algorithm) are used to tune the optimal controller parameters at each operating region by minimizing the IAE (Integral of Absolute Error). Then, a set of controller parameters are expressed as functions of the gain scheduling variable. Those functions are implemented using a set of "if-then" fuzzy rules, which is of Sugeno's form. Simulation works for reference tracking, disturbance rejecting and noise rejecting performances show the feasibility of using the proposed method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.6
• /
• pp.411-419
• /
• 2008

SFC(Static Frequence Converter)system has come to be used as start up drive system for large synchronous motor in many industry applications. Many papers have been presented the control algorithm for pumped storage power generation using SFC system but they did not included about start up algorithm of SFC system for gas turbine. This paper presents the field weakening control algorithm for a large synchronous motor using output signal of anti-windup in PI current regulator and the results of experiment show that the proposed algorithm is proper and effective.