• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.4
• /
• pp.24-31
• /
• 1998

The far-zone magnetic field patterns of a E-plane horn antenna with various edge structures are analyzed using UTD. The ray tracing method is used to lacate the shadow boundaries, and then GO and UTD are utilized to evaluate the incident, reflected, diffracted, surface diffaracted, and the second order diffracted, diffracted-reflected, and diffracted-reflected-diffracted waves existing in each region of interest. By doing this, we analyzed the effects of flanges or caps connected on the edge of a horn antenna on the side lobe and back lobe levels. Also, the validity of this paper is proved by comparing the analytical results with those of measurement and method of moment presented in the reference.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.1
• /
• pp.61-69
• /
• 1995

a numerical method to the problem of mutual admittance between two slots is considered by use of conservation of complex power. Calculation of mutual admittance is compared with other results. And mutual admittance obtained by the method is used in the analysis for the broadband rectangular microstrip antenna geometry using E0plane gap coupling. The theoretical results for both return loss and radiation pattern of the broadband antenna are compared with experimental results. Good agreement between calculated and measured values has been observed.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.203-206
• /
• 1999

This paper describe the design and fabrication of a Multilayer helical antenna for PCS cellular phone. It has been designed for commercial PCS cellular phone by HP-HFSS and fabricated with diameter of 7.6mm and height of 9mm. As a result, the antenna was well-operated in the frequency ranges of 1.75~1.87㎓ for the application of PCS system. We obtained omni-directional radiation pattern, gain of -0.9㏈i and bandwidth of 180MHz.

• ETRI Journal
• /
• v.24 no.3
• /
• pp.197-204
• /
• 2002

This paper presents the results of the numerical simulation of a multibeam active phased array antenna for a High Altitude Platform Station (HAPS). The simulation takes into account the random errors caused by the non-identity of the array elements and the inaccuracy of the antenna calibration. The results of our statistical simulation show that the strict requirements on the sidelobe envelope for HAPSs can be met when the amplitude and phase distribution errors are minor, a condition which may be achieved by using digital beamforming.

• ETRI Journal
• /
• v.39 no.6
• /
• pp.813-819
• /
• 2017

A slotted rectangular nameplate antenna design with a patch bearing the name of the first author is presented. A $6.8mm{\times}26mm{\times}1.6mm$ substrate of FR-4 epoxy material having a relative permittivity of 4.4 and a dielectric loss tangent of 0.02 is used. Additionally, the feeding technique used is a coaxial mechanism. The standard antenna design parameters, including the reflection coefficient, bandwidth, radiation pattern, gain, directivity, and voltage standing wave radio (VSWR) for the proposed prototype are analyzed using a high-frequency structure simulator (HFSS) v-15, and are compared to the measured results. The designed structure may be considered for different satellite- and radio-determination applications at the respective resonant frequencies.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1956-1959
• /
• 2002

Power control (PC) on the reverse link of CDMA cellular system is important to increase system capacity. PC eliminates fluctuations in the received signal level and hence reduces the required signal-to-interference ratio. However, both perfect PC and imperfect PC depend on number of interferences as number of users, which by using smart antenna system can decrease number of interferences in any directions except interferences from the main beam direction. In this paper , number of elements in smart antenna system, which directly relates to the main beam pattern, is studied to find the effects on the outage probability , bit energy-to-interference density ratio (Eb/Io) and the capacities of both perfect and imperfect PC.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.3
• /
• pp.412-418
• /
• 1999

The scattering characteristics of a prime-focus offset-parabolic antenna are analyzed using UTD. First, ray tracing method is used to locate the shadow boundaries, and then UTD is utilized to evalute the far-zone scattered magnetic field pattern. The field components included in the UTD analysis are the reflected, edge diffracted and creeping waves. The effects of circular caps attached to both edges of a prime-focus offset-parabolic antenna are investigated by comparing the scattered magnetic field patterns with those of a knife edge parabolic reflector.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.5 no.1
• /
• pp.76-82
• /
• 1980

In this paper, an arbitrary Iinear antenna is divided into many small sections and numeral analysis by moment method is carried out. So, the equation which is closed to the actual current distribution and solved easily compared with the induced-emf method or retarded potencial method is derived. The current distribution and radiating pattern of the three element Yagi antenna which applied the result is well in accord with the theoritical values.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.5
• /
• pp.21-30
• /
• 1973

A snaked-line array antenna is investigated for the use of high gain antenna at X-band frequency by studing its attenation constant and the radiation pattern. Attenuation constant which is equivalent to the radiation resistance varies roughly as a function of the square of sinh$\theta$a where sin$\theta$a corresponds to the amplitude of sinusoidal form of snaked-line. The directivity is determined by the number of snaked-line antennas and the periodic units of a snaked line.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.411-414
• /
• 2006

본 논문은 다양한 GPS 재밍대응 기술 중에서 안테나 기반의 CRPA(Controlled Reception Pattern Antenna) 시스템에 관한 소개 및 안테나의 널(null) 패턴 합성에 필요한 핵심 모듈인 디지털 I/Q 벡터모듈레이터(Vector Modulator)를 이용한 GPS용 $2{\times}2$ CRPA 패턴 제어방법에 관한 연구 내용이다. 일반적으로 시스템에서 미리 결정된 방향으로 만들어진 안테나 빔을 이용한 위상배열안테나(phased array antenna)와는 달리 CRPA 구조의 GPS 위성수신용 적응배열안테나(adaptive array antenna)는 각 안테나 소자(element)로부터 수신된 신호들을 실시간으로 해석하여, GPS 배열 안테나의 패턴 특성을 제어한다. 본 연구에서는 $2{\times}2$ 배열 정사각(square) 구조의 CRPA를 채택했으며, 재밍신호 방향으로 널(null) 패턴을 합성하기 위한 방법으로 PC에서 제어 가능한 DAC(Digital to Analog Converter)을 이용하여 I/Q 벡터모듈레이터로 인가되는 RF신호의 위상(phase) 및 진폭(amplitude)을 조절한다. 이때 원하는 널(null) 패턴이 합성되도록 네 개의 각 안테나 소자 쪽으로 8채널의 복소가중치(complex weight)를 인가한다.