• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.172-176
• /
• 2008

This paper presents a novel feeding structure of the triple-band internal antenna which covers CELLVLAR/DCS/US-PCS bands. The proposed antenna consists of a U-slot patch radiator with a shorting post connected with ground plane and symmetric feeding lines with respective a feeding and shorting posts on both faces of the fixed FR-4 substrate. Through the simulation and experimental results, the proposed antenna is confirmed to have the features of less interference with a human head/body, broad bandwidth, desirable radiation patterns and efficiency for triple-band applications.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.285-289
• /
• 2002

In this paper, microstrip line-probe feeding patch array antenna with center frequency 5.8㎓ is designed and manufactured. The microstrip line - probe feeding structure has broadband characteristic and be able to modify the array structure for improving antenna gain. In this result, microstrip line-probe feeding patch array antenna has 17.6% bandwidth and 8㏈i antenna gain, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.1-9
• /
• 2014

In this paper, a reconfigurable polarization patch antenna that uses a Y-shaped feed is proposed. The proposed antenna consists of a square patch, a Y-shaped feeding structure, a PIN diode, and a bias circuit for diode operation. The structural symmetry/asymmetry of the feeding structure is determined by the on/off operation of the PIN diode that inserted into the side of one of the lines of the Y-shaped feeding structure. For the proposed reconfigurable antenna, the two microstrip lines of the feeding structure have the same length when the PIN diode operates in the on state, and the antenna exhibits linear polarization(LP). On the other hand, when the PIN diode operates in the off state, the length of one side line of the feeding structure is relatively shorter than that of the other line. Therefore, the antenna exhibits circular polarization(CP). From the measurement results, it is found that the proposed antenna exhibits good impedance matching and axial ratio. In addition, polarization switching can be easily achieved in the same operating band.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.6
• /
• pp.897-903
• /
• 2002

In this paper, a modified feeding structure for microstrip patch antenna is suggested for improving the performances. The proposed antenna has a gap between the transmission line and the recessed part of the radiating patch which makes a capacitive coupling. It shows higher 511(-l4dB) and lower cross polarization level(-2OdB) compare with the conventional inset ftd patch antenna while having a similar characteristics in another evaluating items. Experimental results are examined and considered to apply to the S-Band application, and the effectiveness has been confirmed by FDTD simulation and measurement simultaneously.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.8
• /
• pp.448-454
• /
• 2004

In this paper, circular polarized antennas of Tx 30GHz and Rx 20GHz are implemented in LTCC process. Tx antenna has a circular patch structure and Rx antenna has a ring patch structure. The feeding line of Tx antenna is placed in the center hole of Rx ring patch antenna which is printed under Tx circular patch antenna layer. It makes antenna size smaller. Tx antenna's return loss in under -l0dB level from 30GHz to 31GHz and Rx antenna is under -10 dB from 20GHz to 21GHz. The isolation between two antennas is less than -20dB. Axial ratio is less than 3dB thoughout each band.

• Journal of electromagnetic engineering and science
• /
• v.10 no.4
• /
• pp.296-302
• /
• 2010

This paper proposes an approximate equation for broad bandwidth conditions in an antenna feeding probe design with a cylindrical magneto material structure (CMMS). The bandwidth calculation has been conducted according to the relation between the distance ($r_m$) between the magneto material and feeding probe, and the magneto material thickness ($t_m$) for a given ${\mu}_r$. The bandwidth of a proposed antenna with CMM feeding structure is improved about 182 %, when ${\mu}_r=20+j0.001$, in comparison with the bandwidth of an antenna without CMMS. The maximum error extent between the bandwidth calculated by the approximation equation and by the numerical calculation of the proposed antenna is about $\pm$3.2 % for ${\mu}_r=10+j0.001$. The approximation equation proposed in this study can solve the conventional problem of the complex process and the long time required for reiterative calculation, and allow simple and precise design with prediction. The accuracy of an approximated equation is compared with the results calculated by a commercial tool and verified by reasonable agreement between them.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.4
• /
• pp.1458-1470
• /
• 2018

In this letter, a new dual-port Multiple-Input Multiple-Output (MIMO) antenna is introduced which has two independent signal feeding ports in a single antenna element to achieve smaller antenna volumes for the 5G mobile applications. The dual-port structure is implemented by adding a cross coupled semi-loop (CCSL) antenna as the secondary radiator to the ground short of inverted-F antenna (IFA). It is found that the port to port isolation is not deteriorated when an IFA and CCSL is combined to form a dual-port structure. The isolation property of the proposed antenna is compared with a polarization diversity based dual-port antenna proposed in the literature [9]. The operating frequency range is 3.3-4.0 GHz which is suitable for places where $4{\times}4$ MIMO systems are supposed to be deployed such as in China, EU, Korea and Japan at the band ${\times}$ (3.3 - 3.8GHz. The measured 6-dB impedance bandwidths of the proposed antennas are larger than 700 MHz with isolation between the feeding ports higher than 18 dB [1-2]. The simulation and measurement results show that the proposed antenna concept is a very promising alternative for 5G mobile applications.

• Journal of electromagnetic engineering and science
• /
• v.12 no.2
• /
• pp.155-160
• /
• 2012

A wideband circularly polarized pinwheel-shaped planar monopole antenna fed by a wideband feeding network is presented in this paper. The proposed antenna is formed by four wideband planar monopole antenna elements with aquadruple feeding network in order to improve the performance of circular polarization. Additionally, the antenna, which is introduced here, has a high gain in the z axis direction because of its folded antenna structure. The attractive characteristics of the proposed antenna are the wide impedance bandwidth of 87.3 % (1 GHz to 2.55 GHz), the 3 dB axial ratio (AR) bandwidth of 92.3 % (1.05 GHz to 2.85 GHz), and the maximum gain within the 3 dB AR bandwidth is about 8.24 dBic.

• Journal of Advanced Navigation Technology
• /
• v.13 no.5
• /
• pp.662-668
• /
• 2009

Design of IPI(Inverted PI) feeding internal antenna for the gain improvement of mobile phone was proposed. IPI feeding structure affects on both low radiation resistance of antenna and increase current for the internal antenna such as IFA(Inverted F Antenna). By these facts, antenna fed by IPI can get the gain improvement with increasing radiation efficiency. For the verification, we applied IPI feeding structure to conventional quad band IFA. Measurement shows that IPI-IFA has 0.3~2.0[dB] higher gain than conventional IFA on GSM/DCS/USPCS/WCDMA band.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.8
• /
• pp.1740-1746
• /
• 1997

In this paper, a waveguide-fed slot-coupled microstrip antenna is proposed as enhanced feeding structure of microstrip antenna and an analysis is presented. The presence of dielectric substrate between a stripand a slot is explicitly taken into account in this analysis. The evaluation of the antenna characteristics is carried out using the method of mements and the spectral domain approach in terms of the electric current distribution on the strip and the magnetic current distribution on the slot. From the results, we can conclude that the proposed structure is adequate for array antennas, due to ease of mass porduction and enhanced anteena performance.