• Structural Engineering and Mechanics
• /
• v.75 no.6
• /
• pp.659-674
• /
• 2020

The present paper employs nonlocal strain gradient theory (NSGT) to study buckling behavior of functionally graded magneto-electro-thermo-elastic (FG-METE) nanoshells under various physical fields. NSGT modeling of the nanoshell contains two size parameters, one related to nonlocal stress field and another related to strain gradients. It is considered that mechanical, thermal, electrical and magnetic loads are exerted to the nanoshell. Temperature field has uniform and linear variation in nanoshell thickness. According to a power-law function, piezo-magnetic, thermal and mechanical properties of the nanoshell are considered to be graded in thickness direction. Five coupled governing equations have been obtained by using Hamilton's principle and then solved implementing Galerkin's method. Influences of temperature field, electric voltage, magnetic potential, nonlocality, strain gradient parameter and FG material exponent on buckling loads of the FG-METE nanoshell have been studied in detail.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.403-408
• /
• 2000

An acoustic field in a 3 dimensional enclosure is caused from interference between sound sources and the complex reflections from wall. Therefore, changing an acoustic property of wall such as admittance means generating another acoustic field. The purpose of this paper is utilizing the characteristic to make a quiet zone. First, this paper shows that the control material is essentially on the same road as active noise control(ANC). That is, we can consider the control material as the control source of ANC. However we cannot control the reflection strength of it. Second, through a numerical simulation, this paper shows that the position of the control material is an important variable of the control.

• Geomechanics and Engineering
• /
• v.17 no.6
• /
• pp.597-606
• /
• 2019

Ultrasonic Time-of-Flight Diffraction (TOFD) techniques are useful methods for non-destructive evaluation of fracture characteristics. This study focuses on the reliability and accuracy of ultrasonic diffraction methods to estimate the depth of rock fractures. The study material includes three different rock types; andesite, basalt and ignimbrite. Four different ultrasonic techniques were performed on these intact rocks. Artificial near-surface fracture depths were created in the laboratory by sawing. The reliability and accuracy of each technique was assessed by comparison of the repeated measurements at different path lengths along the rock surface. The standard error associated with the predictive equations is very small and their reliability and accuracy seem to be high enough to be utilized in estimating the depth of rock fractures. The performances of these techniques were re-evaluated after filling the artificial fractures with another material to simulate natural infills.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.1081-1084
• /
• 2002

In this study, we perform 3-D reconstruction of human proximal femur from DICOM files by using voxel mesh algorithm. After 3-D reconstruction, the model converted to Finite Element model which developed for automatically making not only 3-D geometrical model but also FE model from medical image dataset. During this job, trabecular pattern, one of characteristic of human bone can be added to the model by means of giving it's own elastic property calculated from intensity in CT scanned image to the each voxel. And then another model is made from same image dataset which have two material properties - one corresponds to cortical bone, another to trabecular bone. Finally, validity of voxel mesh technique is verified through comparing results of FE analysis, free vibration and stress analysis.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.681-684
• /
• 2008

The way to shorten a construction period is considered to an very important technology element as reducing the form work removal periods with promoting strength revelation own concrete. This study presents an experimental study on the development method, material for early strength concrete. The result is as follow : In OPC, the compressive strength has over 5MPa after 26hours at 20$^{\circ}C$ curing and another 36hours at 10$^{\circ}C$ curing. Used with early strength potland cement, the compressive strength has over 5MPa after 15hours at 20$^{\circ}C$ curing temperature and another 30hours at 10$^{\circ}C$ curing temperature.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1583-1585
• /
• 2007

The purpose of this research is to control proper processing condition of RGB photo resistant in the ink-jet process increasing processing ability by adding additives. The viscosities of modified RGB photo resistant were $10{\sim}14cps$ and the additives could decreased agglomeration and flowing trace of photo resistant effectively. Another way, the adhesion between photo resistant and glass substrate was improved by modifying photo resistant and substrate. The surface tensions of modified photo resistant were same as that of original RGB photo resistant. The additives appeared a better compatibility with photo resistant, and the micelle of photo resistant did not be broken during modified process.

• Journal of the Korean Chemical Society
• /
• v.38 no.10
• /
• pp.726-733
• /
• 1994

Supercritical fluid extraction (SFE) followed by gas chromatographic separation and mass spectrometric (MS) detection were used in rapid analysis of polycyclic aromatic hydrocarbons (PAH's) in air particulate material extracted for 30 min with 10 ml of supercritical $N_2O$ without another sample preparation step. Two samples, urban dust in Seoul area and a certified air particulate reference material 1649 supplied by the NBS (National Bureau of Standards), were processed for the purpose of evaluating extraction and analysis methods. As a result, the quantitative recovery of PAH's in the SFE method was relatively lower than conventional organic solvent extraction methods, but reproducibility was resonable, and analysis time was reduced remarkably. The method has proved to be suitable for monitoring of PAH's in air particulate material.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.3
• /
• pp.368-386
• /
• 1994

The primary purpose of this study was to identify the diversity and embellishment of American Indian clothing and relationship between culture and clothing in American Indian Culture Areas. After the introduction of European material culture, change in American Indian clothing was conducted. The result of the Study as follows: 1. The most influential factors affecting the diversity of American Indian clothing were environmental factors. Climates and geographical features, Raw material were reflected in clothing style and clothing material in each culture Area. 2. Economic situation and life style were shown to be influential to clothing development. The best known instance of this was greatly elaborated clothing and personal adornment of the Plains who had higher stand of life and nomadic life style. 3. Religious concepts were important factors influencing American Indian clothing. Indian tribes had different ritual performance they used particular motifs in clothing. Clothing, such as "ghost shirt", Apache medicine shirt and Pueblo ceremonial clothing, served hidden pur- poses. 4. Techenology was another factor identified in this study as influencing American Indian clothing. Especially, weaving skills of Southwest played a great role in textile development. Pueblo "manta" and Navaho "bil" were famous for Indian costume. 5. European material culture allowed great change of traditional native Indian clothing. American Indian had new material, new styles, new concept of clothing. 6. American Indian, although Indian applicated European trade goods, was actually quite conservative in retaining traditional designs and modes of decoration. Asthetics and traction of American Indian were reflected in American Indian clothing.d in American Indian clothing.

• Journal of Korean Elementary Science Education
• /
• v.27 no.3
• /
• pp.287-295
• /
• 2008

Elementary students' behaviors classifying leaves have been analyzed according to the material types provided for the classification class. 199 sixth grade students were participated in the task classifying the leaves of various plants for the research. The three types of materials provided to them for the class were real leaves, photos of the leaves and explanation cards including the photos of leaves. One of the research findings was that the only material made students handle in the observed behaviors was the real leave of the material types given as classifying. Three were differences between groups in the time required and the number of using criteria for the class. The numbers of criteria had been applied to analyzing their behaviors as classifying the real leaves which were less than those with photo materials. The amount of taken time to classify the real leaves and photo materials were less than those of another material. Finally, the contents of criteria did not differ between groups except appearing properties presented to the task with photo and explanation materials. It is expected that the research can be contributed for elementary school teachers and for curriculum developers to choose appropriate instructional materials as constructing curriculum contents for elementary science to make elementary school students acquire classifying skill in science classes.

• Journal of the Korean Ceramic Society
• /
• v.54 no.3
• /
• pp.222-227
• /
• 2017

Flake-type micro hollow silica was synthesized by precipitation method using an $Mg(OH)_2$ inorganic template and sodium silicate and ammonium sulfate as the silica precursors. We investigated the effects of the silica precursor concentration on the shape, shell thickness, and surface of the hollow silica. When the concentration of the silica precursor was 0.5 M, the hollow silica had a smooth and translucent thin shell, but the shell was broken. On the other hand, the shell thickness of the hollow silica changed in the range of 12 nm to 18 nm with the increase of the precursor concentration from 0.7 M to 1.1 M. Simultaneously, unintended spherical silica satellites were created on the shell surface. The number of satellites and the size rose according to the increased concentration of silica precursor. The reason for the formation of spherical silica satellites is that the $NH_4OH$ nucleus generated in the synthesis of hollow silica acted as another silica reaction site.