• 대한의용생체공학회:의공학회지
• /
• 제15권2호
• /
• pp.189-194
• /
• 1994

Effects of ${AI_2O_3}/{P_2O_5}$ ratio on the crystallization of a series of glasses with the nominal composition of 41.4wt % $SiO_2$, 35.0wt % CaO, 20.6wt % (${P_2O_5}$+${AI_2O_3}$) and 3.0wt% MgO were investigated with DTA, XRD and SEM. The major crystalline phases are apatite and anorthite. The glass transition temperature ($T_g$) and the softening point ($T_s$) are shifted to the upper temperature by increasing $AI_2O_3$ content. The temperature of apatite crystallization ($T_{p1}$) is increased by $AI_2O_3$ content, but the tempera¬ture of anorthite crystallization ($T_{p2}$) is not affected significantly. With increased of $AI_2O_3$, the apatite crystallization is decreased, but anorthite crystallization is increased.

• 한국세라믹학회지
• /
• 제32권6호
• /
• pp.735-747
• /
• 1995

The synthesis of clay mineral through the hydrothermal reaction of the anorthite, which is distributed in San Chung-District of Korea and called as the ground rock for halloysite-kaolin, has been investigated. It was observed that this anorthite sample was easily converted into clay mineral with 0.5 wt% HCl solution at a temperature below 20$0^{\circ}C$ under a pressure about 15 atm. The conversion reaction was promoted by adding aluminum chloride under the condition concerned. Aluminum chloride was considered to supply the insufficient aluminum ion during the conversion reaction and to reprepare the acid solution-condition by adding the HCl-component as a by-product. According to the electron micrographs, it was confirmed that fine tubular or needle-shaped halloysite-kaolin minerals with the crystal length shorter than about 1.1${\mu}{\textrm}{m}$ could be obtained by the hydrothermal reaction for 5 days under those conditions.

• 한국세라믹학회지
• /
• 제14권3호
• /
• pp.157-162
• /
• 1977

The synthesized wollastonite-anorthites by using Korean agalmatolite and limestone are studied. Batch compositions were prepared by the ratio of limestone 4 mole to agalmatolite 1 mole. Optimum temp. for the synthesis of wollastonite-anorthite was around $1,250^{\circ}C$.

• 한국세라믹학회지
• /
• 제19권4호
• /
• pp.275-280
• /
• 1982

This study was carried out to research the change of mineral phases and the characteristics (apparent specific gravity, water absorption, firing shrinkage and thermal expansion etc) of the sintered bodies composed of larnite, wollastonite and anorthite etc. in $CaO-Al_2O_3-SiO_2$ system. Test bodies were composed of the same theoretical composition as it of anorthite and fired up to $1450^{\circ}C$. Investigated the change and micro-structure of the mineral phases by XRD and SEM, the characteristics of the sintered bodies by DTA/TGA and etc. The results were as follows. 1. The sintering temperature had a higher about $60^{\circ}C$ than that of $CaO-SiO_2$ system because of coexisting $Al_2O_3$. 2. The formation and transition temperature of $\beta$-wol lastonite and $\alpha$-wollastonite were similar to the results of $CaO-SiO_2$ system. 3. The formed larnite and wollastonite were decomposed and melted at about $1260^{\circ}C$. 4. Anorthite began to be synthesized at $1140^{\circ}C$, its quantity was repidly increased according to the temperature rising.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2001년도 추계학술강연 및 발표대회
• /
• pp.54-55
• /
• 2001

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.21-21
• /
• 2009

후막 광식각 기술을 이용하여 형성된 Ag 전극과 LTCC 기판 사이의 접착력을 향상시키기 위하여 무기 바인더로서 anorthite, diopside 및 MLS-62 glass frit을 첨가하여 감광성 Ag paste를 제조하였다. 소성 후의 glass pool effect를 감소시키기 위해 attrition mill을 통하여 미세 glass 분말을 준비하였다. Glass frit은 Ag powder의 5vol%~25vol%의 함량으로 첨가하여 감광성 Ag paste를 제조하였고 패턴 형성 후 $850^{\circ}C$에서 1시간 소결하였다. 전극과 기판 사이의 접착력은 micro-ball shear test 법으로 측정하였으며, Ag 전극 부착력은 glass frit의 함량 증가에 따라 증가하다가 감소하는 경향을 보이는데, 이는 과량의 glass frit 첨가로 인한 전극 내부에 액상 풀의 형성에 기인한 것으로 보여진다. Ag 전극의 면저항은 glass frit의 함량이 증가함에 따라 $0.13m{\Omega}{/\square}$에서 $2.06m{\Omega}{/\square}$까지 증가하는 경향을 나타내었다. 소성 전후의 전극 패턴의-수축율은 $100{\mu}m$의 선폭을 기준으로 glass frit의 첨가랑이 증가할수록 43.3%에서 35.0%로 감소하였으며, 그 결과 최소 선폭 $25{\mu}m$의 미세 전극 패턴의 형성이 가능하였다.

• 대기
• /
• 제25권4호
• /
• pp.601-610
• /
• 2015

This study measured the emissivity spectra of 5 major rock-forming minerals using a Fourier Transform Infrared (FT-IR) spectrometer in the spectral region of $650{\sim}1400cm^{-1}$. The mineral samples are quartz, albite, bytownite, anorthite, and sandstone. We compared emissivity spectra measured in this study with spectra provided by Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) and Arizona State University (ASU). The spectral features of emissivity such as Reststrahlen Band (RB) and Christiansen Feature (CF) locations were compared. Results showed that both CF and RB locations of emissivity spectra measured in this study were similar to those from ASTER and ASU. In the case of quartz, the RB was occurred in the region of $700{\sim}850cm^{-1}$ and $1050{\sim}1250cm^{-1}$. The spectral position of emissivity peak was in good agreement with the location of ASTER and ASU. For plagioclase (albite, bytownite, and anorthite), the spectral location of CF was shifted toward larger wavenumber and the emissivity value was increased in the region of $870{\sim}1200cm^{-1}$ with Ca percentage. The CF of anorthite and bytownite was occurred at $1245.79cm^{-1}$, and that of albite was occurred at $1283.79cm^{-1}$. We also confirmed that emissivity feature of sandstone includes both emissivity features of quartz and calcite. However, there were some differences in the magnitude of emissivity and locations of RB and CF. These were due to the differences in measurement methods, and differences in particle size and temperature of samples.

• 한국세라믹학회지
• /
• 제29권7호
• /
• pp.558-564
• /
• 1992

The effect of composed phase in the hot pressed CaO-MgO-Al2O3-SiO2 glass-ceramic has been investigated through microstructure studies, thermal, physical and mechanical properties. Sintering was done in the condition at the temperature range 900~95$0^{\circ}C$ for 20~120 mins under 7.5 MPa unilateral pressure. Sintered ceramics were composed of diopside, anorthite, residual glass and the portion of each phase was dependent on the sintering temperature and the holding time: as the temperature increases, the amount of diopside increased and then the rate of increase of diopside reduced with increasing anorthite. The thermal expansion coefficient of hot pressed was reduced with increasing crystallinity of hot pressed and was in the range of 6.69~7.46$\times$10-6 K-1 below $600^{\circ}C$. The elastic constant of hot pressed increased with increasing crystallinity up to about 80%, but after that was reduced due to the change of microstructure. The flexural strength of sintered ceramics was decreased with higher temperature and holding time, while the fracture toughness of those increased. It was shown that the physical and mechanical properties of hot pressed ceramic were related to the fraction of composed sintered ceramics, similar to a particulate composite, to the crystallinity of 80% of the glass-ceramic.

• 한국결정성장학회지
• /
• 제5권2호
• /
• pp.175-180
• /
• 1995

석탄회의 성상 해명의 일환으로서, 석회석의 열처리 조건과 광물조성의 관계를 검토했다. 석탄회의 주 광물조성은 mullite, quartz 및 유리상(약 20 ~ 25wt%)이었으며, $1000^{\circ}C $ 까지는 거의 변화가 없었다. 안산의 석탄회 중에는 calcite가 함유되었으며, $1200^{\circ}C $ 에서 calcite 분해로부터 온 CaO, quartz 및 유리상 중의$Al_2O_3$가 반응하여 anorthite($CaO{\cdot}Al_2O_3{\cdot}2SiO_2$)로 바뀌는 것을 알 수 있었다.

• 한국세라믹학회지
• /
• 제32권7호
• /
• pp.777-782
• /
• 1995

The scale up production test for the hydrothermal synthesis of clay mineral from the anorthite, which is distributed in San Chung-District of Korea and called as the ground rock for halloysite-kaolin, has been investigated by using the gaitator type reactor. The automatic control system has been developed and applied for the more effective producibility and the reduction in the defect of this intermittent batch processing property, and finally for the feasibility of this system in actual use. It was observed that this agitator type reactor can reduce the synthesis reaction tme from 5 days to 3 days, only with the condition of 20rpm. The automatic control system could regulate the vessel temperature and pressure precisely at an optimum condition during the treatment. Therefore, from these test results the application-possibility for this system was found to be feasible in actual use.