• Journal of Positioning, Navigation, and Timing
• /
• v.2 no.1
• /
• pp.33-40
• /
• 2013

In this paper, GPS signal anomaly generation software is proposed which can be used for the analysis of GPS signal anomaly effect and the design, verification, and operation test of anomalous signal monitoring technique. For the implementation of anomalous signal generation technique, anomalous signals are generated using a commercial signal generation simulator, and their effects and characteristics are analyzed. An error model equation is proposed from the result of analysis, and the anomalous signal generation software is constructed based on this equation. The proposed anomalous signal generation software has high scalability so that users can easily utilize and apply, and is economical as the additional cost for purchasing equipment is not necessary. Also, it is capable of anomalous signal generation based on real-time signal by comparing with the commercial signal generation simulator.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.2
• /
• pp.167-174
• /
• 1995

The anomlous signal, anomaly, recorded by a sub-bottem profiler is analized for exploration of buried objects in the ocean, This anomaly is known as a signal diffracted from the edge of the buried object. Signals obtained from model that and numerical simulation are analized for investigating characteristics of the diffracted signal. From this study a diffracted signal and a non-diffracted signal can be identified, and the location of the object can be obtained. In order to identify an object in the seafloor the dimension of the object should be greater than the wave length used for exploration, and the acoustic impedance should be much greater than that of sediments. A 2-trace stacking of the signals can enhance the feature of strongly diffracted signals whereas it can diminish weak signals.

• International Journal of Contents
• /
• v.18 no.2
• /
• pp.68-80
• /
• 2022

The health of the human heart is commonly measured using ECG (Electrocardiography) signals. To identify any anomaly in the human heart, the time-sequence of ECG signals is examined manually by a cardiologist or cardiac electrophysiologist. Lightweight anomaly detection on ECG signals in an embedded system is expected to be popular in the near future, because of the increasing number of heart disease symptoms. Some previous research uses deep learning networks such as LSTM and BiLSTM to detect anomaly signals without any handcrafted feature. Unfortunately, lightweight LSTMs show low precision and heavy LSTMs require heavy computing powers and volumes of labeled dataset for symptom classification. This paper proposes an ECG anomaly detection system based on two level BiLSTM for acceptable precision with lightweight networks, which is lightweight and usable at home. Also, this paper presents a new threshold technique which considers statistics of the current ECG pattern. This paper's proposed model with BiLSTM detects ECG signal anomaly in 0.467 ~ 1.0 F₁ score, compared to 0.426 ~ 0.978 F₁ score of the similar model with LSTM except one highly noisy dataset.

• Journal of Navigation and Port Research
• /
• v.35 no.9
• /
• pp.701-706
• /
• 2011

Radio waves including GPS signals, various TV communications, and radio broadcasting can be disturbed by a strong solar storm, which may occur due to solar flares and produce an ionospheric delay anomaly in the ionosphere according to the change of total electron content. Electron density irregularities can cause deep signal fading, frequently known as ionospheric scintillation, which can result in the positioning error using GPS signal. This paper proposes a detection algorithm for the ionosphere delay anomaly during a solar storm by using multi-reference stations. Different TEC grid which has irregular electron density was applied above one reference station. Then the ionospheric delay in zenith direction applied different TEC will show comparatively large ionospheric zenith delay due to the electron irregularity. The ionospheric slant delay applied an elevation angle at reference station was analyzed to detect the ionospheric delay anomaly that can result in positioning error. A simulation test was implemented and a proposed detection algorithm using data logged by four reference stations was applied to detect the ionospheric delay anomaly compared to a criterion.

• Journal of Navigation and Port Research
• /
• v.34 no.7
• /
• pp.511-516
• /
• 2010

GPS anomaly has increased according to the degradation of satellite performance, and many GPS users could be exposed to any kinds of error-included signals without any previous notice when unscheduled error occurred. RSIM (Reference Station Integrity Monitors) is a typical monitoring method to broadcast PRC (Pseudo Range Correction) for users. However, there were some cases that the receiver detected the anomalous satellite's signal even though it was unhealthy set, consequently it occurred a large range error. Then it is important to monitor the integrity of GPS signal and it is needed to devise the correction method of pseudorange by eliminating error-occurred PRN for notification to GPS users when it is monitored that the anomaly occurred. This paper proposes the basic concept of how to correct the pseudorange. The paper also shows the analysis results of PRN10 GPS anomaly occurred on day 39 in 2007 with corrected results by eliminating anomaly satellite (PRN10). The proposed correction method shows decreased pseudorange error range compared to the case when the anomaly satellite were used.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.4
• /
• pp.335-343
• /
• 2023

Drone based Magnetic Anomaly Detection measure a magnetic anomaly signal from the ferromagnetic target on the ground. We conduct a magnetic anomaly detection with 9 ferromagnetic targets on the ground. By removing the magnetic field measured in the absence of ferromagnetic targets from the experimental value, the magnetic anomaly signal is clearly measured at an altitude of 100 m. We analyze the signal characteristics by the ferromagnetic target through simulation using COMSOL multiphysics. The simulation results are within the GPS error range of the experimental results.

• Journal of Navigation and Port Research
• /
• v.40 no.5
• /
• pp.265-270
• /
• 2016

Extreme tropospheric anomalies such as typhoons or regional torrential rain can degrade positioning accuracy of the GPS signal. It becomes one of the main error terms affecting high-precision positioning solutions in network RTK. This paper proposed a detection algorithm to be used during atmospheric anomalies in order to detect the tropospheric irregularities that can degrade the quality of correction data due to network errors caused by inhomogeneous atmospheric conditions between multi-reference stations. It uses an atmospheric grid that consists of four meteorological stations and estimates the troposphere zenith total delay difference at a low performance point in an atmospheric grid. AWS (automatic weather station) meteorological data can be applied to the proposed tropospheric anomaly detection algorithm when there are different atmospheric conditions between the stations. The concept of probability density distribution of the delta troposphere slant delay was proposed for the threshold determination.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.2
• /
• pp.279-286
• /
• 2013

The recent power shortages due to surge in demand for electricity highlights the importance of smart grid technologies for efficient use of power. The experimental content for vulnerability against availability of smart meter, an essential component in smart grid networks, has been reported. Designing availability protection mechanism to boost the realization possibilities of the secure smart grid is essential. In this paper, we propose a mechanism to detect the availability infringement attack for smart meter and also to find anomaly nodes through analyzing smart grid structure and traffic patterns. The proposed detection mechanism uses approximate entropy technique to decrease the detection load and increase the detection rate with few samples and utilizes the signal information(CIR or RSSI, etc.) that the anomaly node can not be changed to find the anomaly nodes. Finally simulation results of proposed method show that the detection performance and the feasibility.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.8
• /
• pp.1412-1417
• /
• 2007

Magnetic anomaly generated around a ship is mainly due to the permanent magnetization(PM) and induced magnetization (IM) remaining on the hull. It is very difficult to predict the direction and its magnitude of the permanent magnetization distributed over the hull, that is caused by mechanical or thermal stress. In this paper, an effective method is proposed to separate two components, the one produced by PM and the other by IM, from the underwater earth field signal distorted by the ferromagnetic material of the ship. The method can easily provide the two kinds of magnetic anomaly through exploiting experimental results and 3D electromagnetic field analyses even though the PM distribution on the hull is not known. To validate the proposed method, a model ship is manufactured and tested. The results would be of much help to basis research for securing safe navigation of a ship against dangerous factors in underwater.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.3
• /
• pp.338-345
• /
• 2024

Magnetic anomaly signals from the ferromagnetic targets such as ships in the sea are measured by drone-based magnetic anomaly detection. A quantum magnetometer is suspended from the drone by 4 strings. Flight altitude and speed of drone are 100 m and 5 m/s, respectively. We obtain magnetic anomaly signals of few nT from the ships clearly. We analyze the signal characteristics by the ferromagnetic target through simulation using COMSOL multiphysics.