• Journal of the Korean GEO-environmental Society
• /
• v.15 no.4
• /
• pp.29-36
• /
• 2014

The purpose of this study investigates the delivery characteristics according to the load of pollutants by calculating the delivery rate of targeted areas on pollutants in Sapkyo reservoir. The main rivers of Sapkyo reservoir are Namwoncheon, Dogocheon, Sapkyocheon, Muhancheon and Gokgyocheon. The delivery rate and their characteristics of five major rivers during rainfall season are investigated. As th result, biochemical oxygen demand (BOD), total nitrogen (T-N) and total phosphorous (T-P) of total delivery rate are calculated by 0.40, 0.34 and 0.08, respectively. The delivery rate of T-P compares to other water quality is investigated relatively low. Looked at the overall characteristics of the watershed, the delivery rate of T-N and T-P is little change in the rate of the year, too. The delivery rate of T-N is calculated from 0.2 to 0.3 in the dry season, and from 0.31 to 0.39 in a flood, respectively. The delivery rate of T-P is calculated to more than 0.3 in the dry season, and 0.11 in a flood. It is similar values which the average annual delivery rate of T-P is 0.08. Therefore, the measured delivery rate of Sapkyo reservoir can be applicable such as a delivery rate of similar features of the terrain and land use.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1A
• /
• pp.75-89
• /
• 2006

This paper presents a practical and realistic Life-Cycle Cost (LCC) optimum design methodology of steel bridges considering time effect of bridge reliability under environmental stressors such as corrosion and heavy truck traffics. The LCC functions considered in the LCC optimization consist of initial cost, expected life-cycle maintenance cost and expected life-cycle rehabilitation costs including repair/replacement costs, loss of contents or fatality and injury losses, road user costs, and indirect socio-economic losses. For the assessment of the life-cycle rehabilitation costs, the annual probability of failure which depends upon the prior and updated load and resistance histories should be accounted for. For the purpose, Nowak live load model and a modified corrosion propagation model considering corrosion initiation, corrosion rate, and repainting effect are adopted in this study. The proposed methodology is applied to the LCC optimum design problem of an actual steel box girder bridge with 3 continuous spans (40 m+50 m+40 m=130 m), and various sensitivity analyses of types of steel, local corrosion environments, average daily traffic volume, and discount rates are performed to investigate the effects of various design parameters and conditions on the LCC-effectiveness. From the numerical investigation, it has been observed that local corrosion environments and the number of truck traffics significantly influence the LCC-effective optimum design of steel bridges, and thus realized that these conditions should be considered as crucial parameters for the optimum LCC-effective design.

• Journal of Korean Society on Water Environment
• /
• v.25 no.2
• /
• pp.212-220
• /
• 2009

In many studies, the Numeric Integration (NI) method has been widely used to calculate pollutant loads from the watershed because it is easy to apply. However, there have been many needs for more accurate pollutant loads estimation method with the restricted number of water quality samples. However, the ESTIMATOR model does not allow the users to define the regression model to explain the measured flow and water quality relationship, indicating the ESTIMATOR model is not flexible. The LOADEST model allows the user to choose the model type from 11 predefined general forms of regression equations. Annual loads of T-N and T-P with the LOADEST model were 0.70 times and 0.84 times of those by NI method, respectively. The coefficient of determination ($R^2$) of the LOADEST regression for the T-N and T-P were 0.92 and 0.72, respectively. This indicates that the load estimation regression model with the LOADEST for the study watershed explains the relationship between the observed flow and water quality data well reasonably well. Based on these findings, we suggest that the LOADEST model estimated regression equation could be used to estimate pollutant loads using the measured flow data for the study watershed.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.2
• /
• pp.285-294
• /
• 2012

Current urban stream conditions and their restoration projects were investigated by surveying the urban stream management experts in 29 cities with high population density (more than 1,000person/$km^{2}$). The survey results showed that the ratio of covered urban streams decreased by 1.4% (from 14% to 12.6%) in the last 5 years through steady river restoration projects promoted by governments. Nonetheless, 36.3% of 369 urban streams surveyed still report stream depletion problems; therefore, more efforts to alleviate the problems caused by distorted water circulation of urban streams are still necessary. Water depletion in many local urban streams, unlike national rivers, is accelerated due to negligence in stream management, budget shortage, and other reasons. To prevent stream depletion, the use of reclaimed water is suggested as one of the prevention plans. When available amounts of reused sewage are estimated through actual available nationwide sewage discharges of each watershed and instream flow of stream, annual instream flow supply of 780 million $m^{3}$ is expected; 4.8% reduction in the pollution load of public sewer treatment facilities is expected; and the creation of new value through water reuse service is expected. Thus, it is important for the reviews of feasibility and alternatives of water reuse projects for flow augmentation to consider not only investment budget reductions, but also environmental aspects. Also it is necessary to provide the financial support of unified government with strict water quality management policy.

• Journal of the Korea Concrete Institute
• /
• v.23 no.5
• /
• pp.667-674
• /
• 2011

This paper discusses the analysis method of prestressed concrete girder integral abutment bridges for a 75-year bridge life and the development of prediction models for abutment displacements under thermal loading due to annual temperature fluctuation and time-dependent loading. The developed nonlinear numerical modeling methodologies considered soil-structure interaction between supporting piles and surrounding soils and between abutment and backfills. Material nonlinearity was also considered to simulate differential rotation in construction joints between abutment and backwall. Based on the numerical modeling methodologies, a parametric study of 243 analysis cases, considering five parameters: (1) thermal expansion coefficient, (2) bridge length, (3) backfill height, (4) backfill stiffness, and (5) pile soil stiffness, was performed to established prediction models for abutment displacements over a bridge life. The parametric study results revealed that thermal expansion coefficient, bridge length, and pile-soil stiffness significantly influenced the abutment displacement. Bridge length parameter significantly influenced the abutment top displacement at the centroid of the superstructure, which is similar to the free expansion analysis results. Developed prediction model can be used for a preliminary design of integral abutment bridges.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.340-345
• /
• 2003

This study, as a basic study for establishing a influence forecasting/estimating model when drain the deep sea water to the ocean after using it, carried out studies as follows; 1) estimating the amount of river discharge and pollutant loads inflowing into the developing region of deep sea water in East Sea, Korea 2) a field observation of tidal current, vertical distribution of water temperature and salinity, and 3-D numerical experiment of tidal current to analysis physical oceanographic status. The amount of river discharge flowing into the study area was estimated about $462.6{times}10^{3}m^{3}/day$ of daily mean in 2002 year. annual mean pollutant load of COD, TN and TP were estimated 7.02 ton-COD/day, 4.06 ton-TN/day and 0.39 ton/day, respectively. Field observation of tidal current results usually show about $20{\sim}40cm/sec$ of current velocity at the surface layer, it indicated a tendency that the current velocity decreases under 20cm/sec as the water depth increases. We could find a stratification within approximately the depth of 30m in field observation area, and the depth increases. We could find a stratification within approximately the depth of 30m in field observation area, and the differences of water temperature and salinity between the surface layer and bottom layer were about $18^{\circ}C$ and 0.8 psu, respectively. On the other hand, we found that there was a definite as the water mass of deep sea water about 34 psu of salinity.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.3
• /
• pp.31-38
• /
• 2014

Four actual cultivations were prepared and a variety of soybean was cultivated. A H-flume, an automatic water level gauge and an automatic water sampler were installed at the outlet of each plot equipped for the measurement of flow rate and its water quality. The amount of rainfall of the study area in 2013 was measured as 975.6 mm which was much lower than the annual average rainfall of 1,271.8 mm, resulting in less occurrences in rainfall-runoff events. Rainfall-runoff events were occurred three times during the rainfall event of 4~5 July, 23 and 24 August. The characteristics of NPS pollution discharge of the plots and the reduction effect of the selected BMPs were analyzed during these events. The reduction effect of straw mat and soil amendments (Polyacrylamide (PAM) and Gypsum) on runoff ratio ranged between 38.2 and 92.9% (average 71.6%). The NPS pollution load reduced between 27.7 and 95.1% (average 70.0%) by the application of rice straw mat and soil conditioner when compared with that of control plot. Soybean yield (2,133.3 kg/ha) of the straw mat covered plots increased by 14.3% when compared with control (1,866.7 kg/ha). The effect of straw mat on the yield was not economically viable if the material and accompanying labor costs were considered. The data collected and analyzed on different soil textures and crops in this study are expected to be a fundamental reference for the expansion of the results to the application nationwide and the development of NPS pollution management policies.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.31 no.3
• /
• pp.93-102
• /
• 1989

With an objective to provide basic information for the management and the prediction of eutrophication in lentic water Systems, total amount of Kjeldahl nitrogen(T-N) and phosphorous(T-P) from irrigated water and drained water from flooded paddies were investigated during the rice growing period of 1988. A 29.3 ha paddies near Jungnam-myun, HwaSung-gun, Gyungi Province, Korea was instrumented for measuring runoff and sampling irrigated water and drained water from paddies. The following conclusions may be drawn from the result of this study. 1.During 115 days of investigation, T-N load for paddies was 362.6kg and T-P 63.44kg.These would be converted to 12.4kg T-N/ha and 2.17kg T-P/ha, respectively. 2.The T-N and T-P loadings in different periods showed a significant difference. The 25% of T-N loading was drained soon after fertilization period and 60% was drained during the rainy season from July 5 to July 24. 3.Annual loadings from paddies could be calculated to 30kg T-N/ha/year and 52kg T-P/ha/year considering non-measurement periods. 4.After the rainy season, the nutrient loads from drained water showed much less than those from irrigated water, and it may be suggested that the paddies would act as a stabilization pond. 5.The average concentrations of nutrients at 0.9km downstream from investigated paddies were 2.02(T-N) mg/l and 0.52(T-P) mg/I, which were 1.82(T-N) mg/l and 0.056(T-P)mg/l lower than those of drained water from paddies.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.6
• /
• pp.89-99
• /
• 2012

An upland monitoring was conducted for about 4 years with respect to the water and quality of rainfall-runoff. The objective was to characterize of runoff and nonpoint source (NPS) pollution from a sandy field with 4.5 % in slope under balloonflower (2008-2010) and potato (2011) cultivation. Balloonflower was cultivated without any surface cover but potato was grown under plastic mulching. Runoff rate, EMCs and NPS pollution loads were estimated. The first flush effect was evaluated, and the correlation coefficient among the selected water quality indices were analyzed. Average rainfall size was higher by 2.3 mm when balloonflower was cultivated but average runoff rate was higher by 0.02 when potato was cultivated due to the plastic mulching. EMCs monitored from balloonflower field were higher than potato field except SS and TN, but all NPS pollution loads of potato field were 2.1~22.9 times greater than balloonflower field because of larger runoff volume. As a result of first flush effects, balloonflower and potato field were more influenced by increasing of accumulated rainfall and rainfall intensity rather than first flush. In the result of correlation analysis, there were no evident correlations between runoff and water quality indices. However, there were obvious correlations between SS and the other indices except TN. As a result of this study, it was thought that perennial balloonflower crop could help reduce runoff and NPS pollution loads but annual crop with plastic mulching increase them.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.3
• /
• pp.135-148
• /
• 2018

Reservoir sedimentation is a major environmental issue, and various sediment load controls and plans have been proposed to secure clean and safe water resources. The objectives of this study were to estimate soil loss in the upper basins and predict sediment deposition in Ipjang reservoir using hydrologic and hydraulic model. To do so, SWAT (Soil and Water Assessment Tool) and EFDC (Environmental Fluid Dynamics Code) was used to estimate soil loss in two upper basins and to predict spatial distribution and amount of sediment deposition in the Ipjang reservoir, respectively. The hydrologic modeling results showed that annual average soil loss from the upper basins was 500 ton. The hydraulic modeling results demonstrated that sediment particles transported to the reservoir were mostly trapped in the vicinity of the reservoir inlet and then moved toward the bank over time. If long-term water quality monitoring and sediment survey are performed, this study can be used as a tool for predicting the dredging amount, dredging location and proper dredging cycle in the reservoir. The study findings are expected to be used as a basis to establish management solutions for sediment reduction.