• 한국응용과학기술학회지
• /
• 제25권3호
• /
• pp.404-409
• /
• 2008

The core-shell composite particles of inorganic/organic were polymerized by using styrene(St) as a shell monomer and potassium persulfate (KPS) as an initiator. We studied the effect of core-shell structure of silicone dioxide/styrene in the presence of an anionic surfactant sodium lauryl sulfate (SLS) and polyoxyethylene alky lether sulfate (EU-S133D). We found that when $SiO_2$ core/PSt shell polymerization was prepared on the surface $SiO_2$ particle, to minimize the coagulation during the shell polymerization, the optimum conditions were at concentration of $2.56{\times}10^{-2}mole/L$ SLS. The structure of core-shell polymer was confirmed by measuring the thermal decomposition of polymer composite using thermogravimetric analyzer and morphology of core-shell polymer particles by transmission electron microscope (TEM).

• 환경위생공학
• /
• 제16권1호
• /
• pp.27-33
• /
• 2001

The purpose of this study on environmental investigation in Hongsung and Kwangchun streams is for the finding the degree of water quality. Physicochemical characteristics of streams are very important. However, that has not been investigated so for especially in stream of Hongsung area, And so, we tried to analyse BOD, TDS, $Cl^{-}$, anionic surfactant, pH, T-N and T-P of stream. The results were as follows. The pH for stream were generally in the range of 6.9 ~ 8.1 which is water quality for stander for stream, water quality of the Hongsung and Kwangchun upstream was not in problem but downstream showed somewhat high concentration in BOD, chlorine ion, T-P, T-N, and anionic surfactants. Especially BOD of Kwangchun downstream was higher than Hongsung downstream and concentration of T-P of Hongsung downstream was kept over 7 mg/liter regardless of inflow BOD ranging from 1.3 to 1.8 mg/liter.

• 한국응용과학기술학회지
• /
• 제21권4호
• /
• pp.380-387
• /
• 2004

The preparation of $CaSO_4$ nanoparticle by vesicles formed spontaneously in cationic OTAC and anionic ADS mixed surfactant solution whose ratio is 0.3/0.7 is investigated. Added electrolytes for preparing nanoparticles reduce vesicle size about 200-300 nm comparing with that of pure vesicle whose size is 700-800 nm by DLS. The core of vesicles has 200 nm size and acts as nanoreactors which same size of monodisperse $CaSO_4$ nanopaticles are formed. Although $CaSO_4$ particles are formed at the outer of vesicles, they are very large and amorphous. The formed particles are identified with XRD analysis after separation due to coinciding with $CaSO_4$ particles.

• 한국응용과학기술학회지
• /
• 제25권1호
• /
• pp.83-90
• /
• 2008

The core-shell latex particles were prepared by sequential emulsion polymerization using alkyl methacrylate as a shell monomer and potassium persulfate (KPS) as an initiator. We study the effects of core-shell structure of calcium carbonate/alkyl methacrlyate in the presence of an anionic surfactant sodium lauryl sulfate (SLS) and polyoxyethylene alkyl ether sulfate (EU-S133D)). The structure of core-shell polymer were investigated by measuring to the thermal decomposition of polymer composite using thermogravimetric analyzer and morphology of latex by transmission electron microscope (TEM).

• 보존과학회지
• /
• 제28권1호
• /
• pp.21-27
• /
• 2012

조선시대 양반가의 장례시 매장방식은 회곽묘제를 사용하였으며, 그 유물들이 현대에 형태를 유지한 채로 출토되는 경우가 종종 있다. 그러나 그 내부에서 발견되는 섬유유물들은 예전에는 염직물이었을 것으로 예상되나 오랫동안 시즙과 수분에 의해 오염되어 고유의 색상 및 물성에 변화를 일으킬 수 있다. 이러한 오염은 출토 후에도 계속적으로 유물의 변퇴색 및 열화에 영향을 미칠 것으로 예상되므로 적합한 세척이 요구된다. 따라서 본 연구는 습식세척 후 출토염직물의 색변화를 최소화할 적합한 세정조건을 조사하기 위하여 적색계 7종, 청색계 1종, 황색계 6종, 녹색계 4종, 자색계 4종의 천연염색 염색포(견과 면)을 만들어서 이를 돈육과 함께 6개월간 냉장보관한 후 꺼내어 물, 음이온계면활성제(SDS), 비이온계면활성제(TritonX-100), 천연계면활성제(Saponin) 등 4종의 세정액를 이용하여 $20^{\circ}C$와 $40^{\circ}C$의 온도에서 습식세척하여 염직품들의 색상변화에 대한 영향을 조사하였다. 그 결과 색상의 변화는 세정온도, 섬유소재, 세정제, 이용한 염료의 종류에 따라 차이를 나타내었다.

• 한국건설순환자원학회논문집
• /
• 제5권4호
• /
• pp.442-449
• /
• 2017

이 연구에서는 시멘트계 재료의 펌프압송성능을 향상시키기 위하여 외부에서 소량의 윤활층 활성화제를 배관에 주입하는 방법을 제안하였다. 활성화제는 배관과 압송재료 사이에 형성되는 윤활층에 주입되어 윤활층의 점도, 즉, 배관과 재료 사이의 마찰을 감소시키는 역할을 한다. 제안된 방법의 검증을 위해 모르타르를 사용한 소규모 펌핑실험을 수행하였다. 물-시멘트 비 47%인 모르타르를 사용하였고, 윤활층 활성화제 종류와 활성화제의 주입량을 각각 2가지와 3가지로 달리하여 실험을 수행하였다. 윤활층 활성화제로는 고성능 감수제와 음이온 계면활성화제를 사용하였다. 윤활층 활성화제의 주입량은 모르타르 토출량의 0.14, 0.28, 0.42%이다. 윤활층 활성화제 주입 전과 후의 압축강도, 배관 내부 압력을 측정하였다. 음이온 계면활성제를 사용한 경우 압축강도의 변화가 없었으며, 배관 내부 압력 감소율이 최대 71.4%로 가장 크게 감소하는 것을 확인하였다.

• 한국의류산업학회지
• /
• 제16권2호
• /
• pp.333-338
• /
• 2014

This study identifies the effects of sodium sulfate and surfactants in the papain treatment of wool fabrics using L-cysteine and EDTA as activators. The research method involves the use of 2% L-cysteine and 7% EDTA as activators at optimal conditions, papain treatment of wool fabrics with the joint use of sodium sulfates and surfactants, and measurements of the weight loss rate, tensile strength, and whiteness. Results showed that for both 2% L-cysteine and 7% EDTA, the maximum papain activity appeared at 0.5% sodium sulfate concentration. In both cases, the papain activity was enhanced at sodium sulfate concentrations lower than 0.5%. In contrast, the papain activity declined at sodium sulfate concentrations higher than 0.5%. The joint use of EDTA with 0.5% sodium sulfate was proven to be very effective in improving the papain activity. The joint use of 2% L-cysteine with 0.5% sodium sulfate appeared slightly effective in improving the activity but resulted in excessive decrease in the tensile strength and whiteness, compared to improvement in the activity. The joint use of surfactants, in the case of L-cysteine, interrupted the papain activity and decreased the tensile strength regardless of the surfactant type and concentration. In the case of EDTA, however, the joint use with 0.1-5% non-ionic surfactants, 0.1-0.5% anionic surfactants, and 0.1% cationic surfactant appeared to improve the papain activity. The maximum papain activity was observed when 0.1% of surfactant was used, regardless of the surfactant type. The nonionic surfactant was the most effective in improving the papain activity.

• 한국의류학회지
• /
• 제1권1호
• /
• pp.31-37
• /
• 1977

The effects of surfactants and concentration of NaOH in surfactant solution on the removal of free fatty acid soil from cotton fabrics were investigated. Cotton fabrics were soiled with palm itic acid which is the most common fatty acid found in natural oily soil and washed in Lauder-ometer with various types of surfactant with or without NaOH. The rate of soil removal was estimated by analyzing palmitic acid contents in fabric before ar d after washing. Analysis of palmitic contents was made by extracting palmitic acid with azeotropic mixture of alcohol-benzene and the extracts were titrated with standard NaOH solution. It was shown that the types of surfactant are important factor in free fatty acid removal and the efficiency increases in the following order: SLS$90\%$ of initial sorption. In relation to the mechanism of detergency, the suspending and emulsifying power of surfactants were also examined. From the results of this experiments, it could be concluded that the soap formation with alkali and the suspending power of surfactant arc significant factors in free fatty acid soil removal, but the emulsifying power of it is neglizible.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.436-437
• /
• 2003

고형오구의 분산안정화 작용은 고체 입자의 계면에 흡착한 계면활성제에 의한 전기적 반발력과 입체적 보호작용에 영향을 받게 된다. 특히 현재 시판세제의 조성에서 비이온계 계면활성제의 혼합이 점차 중요시되는 이때 입체적 보호작용에 의한 고형오구의 분산안정성은 의류제품의 세척성 제고에 좋은 정보가 되리라 생각된다. 따라서 본 연구는 시판되고 있는 세제 대부분이 음-비이온계 계면활성제의 혼합으로 되어 있는 점을 고려하여 음이온 계면활성제로서 D5S(sodium dodecyl benzene sulfonate), 비이온계 계면활성계 NPE(nonyl phenol polyoxyethylene ether, EO$_{10}$) 혼합용액에서 음이온과 비이온계 계면활성제의 입자에의 흡착과 고형오구의 안정성을 관련시켜 고찰하였다. (중략)

• 펄프종이기술
• /
• 제29권2호
• /
• pp.16-24
• /
• 1997

This experiment was mainly performed with a biological treatment of laser printed paper using enzyme, We got the following conclusions : In the case of nonionic surfactant treatment, brightness, residual ink contents and several strength properties of deinked paper were excellent at the low dosage of cellulase 0.05%. When mixed cellulase and xylanase was used, yield was increased as the dosage increased up to 0.2%, but brightness was decreased at the same condition. In contrast, deinking efficiency of anionic type was reduced in terms of brightness, residual ink contents, and tensile strength. As flotation time was increased, yield decreased and brightness increased slightly. On the other hand, the addition of surfactant during repulping process showed better result than that during flotation process.