• 대한환경공학회지
• /
• 제28권5호
• /
• pp.549-557
• /
• 2006

화력발전소에서 발생하는 폐 음이온교환수지를 분해하기 위해 초임계수 산화 특성 연구를 진행하였다. 폐수지는 음이온교환수지와 양이온교환수지가 혼합된 상태로 배출되었으며, 혼합된 폐수지에서 고-액 유동층을 이용하여 음이온수지를 분리하였다. 분리된 음이온 수지는 원소분석과 열분석을 통해 양이온 수지가 혼합되지 않았음을 확인하였다. 음이온수지를 고압 펌프를 이용하여 초임계수 산화 반응 장치에 연속적으로 주입하기 위해 습식 ball mill을 이용하여 분쇄, 슬러리로 제조하였다. 압력 25.0 MP콘 체류시간 2분, 반응 온도 $500^{\circ}C$에서 처리수의 COD는 99.9%이상 분해됨을 확인하였지만, 총 질소 분해율은 41% 정도로 나타났으며, 슬러리에 질산을 혼합하면 처리수의 총 질소가 감소하였다. 처리수의 COD와 총 질소(T-N) 함량을 목적변수로 설정하여 음이온 수지 슬러리를 분해하는 최적 조건을 도출하기 위해 통계적 실험계획법인 중심합성계획법을 적용하였다. 처리수의 COD는 반응 온도 $500{\sim}540^{\circ}C$, 압력 25.0 MPa, 반응기 체류시간 2분 조건에서 $99.9{\sim}100%$까지 충분히 분해되었으며, 온도 변화와 질산 주입량 변화에 영향을 받지 않았다. 그러나 처리수의 총 질소는 질산 주입량의 변화에 대한 영향이 큰 것으로 확인되었다. 처리수의 총 질소는 회귀분석을 통해 질산 주입량의 함수로 나타낼 수 있었으며, 결정계수($r^2$)는 95.8%로 계산되었다.

• 펄프종이기술
• /
• 제47권2호
• /
• pp.53-60
• /
• 2015

The effects of stirring speed during filler modification by dual polymers on flocculation and reflocculation of PCC (precipitated calcium carbonate) particles and its effect on handsheet properties were elucidated. PCC surface was modified by adsorbing A-PAM (anionic polyacrylamide) and C-starch (cationic starch) in series at various stirring speeds. It was found that increasing stirring speed during filler modification decreased the initial floc size of PCC. Continuous stirring with the same speed for filler modification resulted in the decrease of a floc size, eventually reached a steady state. The variations in a floc size was influenced by the stirring speed during filler modification: the lower the stirring speed during filler modification, the larger the floc size variations. Conclusively, the stability of PCC floc could be improved by increasing the stirring speed. In addition, the stirring speed influenced the handsheet properties. The smaller the PCC floc, the lower the strength of handseet. However, too much larger floc size also deteriorated paper strength. There exists an optimum floc size in term of paper strength which shall be controlled by stirring speed during filler modification.

• 펄프종이기술
• /
• 제47권4호
• /
• pp.46-53
• /
• 2015

Paper strengthening system of PVAm (polyvinylamine) has been used with strong negative charge polymer for electrostatic neutralization due to strong positive charge of PVAm. Recently, because of the controversy caused by the possibility of remaining PAM monomers in white water, a search for paper strength agent that can substitute for PAM was suggested. Therefore, this study was carried out to evaluate a dry strength polymer of PVAm. Starch and CMC were used as a substitute for PAM. The dual polymer system of PVAm and anionic charge control agent such as anionic starch or CMC (carboxy methyl cellulose) were found to be very effective as strength agent compared to the chemicals based on acrylamide.

• 한국염색가공학회지
• /
• 제23권4호
• /
• pp.284-289
• /
• 2011

Poly(phenylene sulfide)(PPS) films were photooxidized under UV/ozone irradiation. The effect of UV energy on the surface properties of the UV-irradiation PPS films were investigated by the measurement of reflectance, surface roughness, and contact angle. Reflectance decreased at the wavelength of 400nm and the surface roughness increased with increased UV energy. The improvement in hydrophilicity with increased $O_{1s}/C_{1s}$ was caused by the introduction of hydrophilic $SO_2$ bond. Surface energy increased from 46.6 to $78.3mJ/m^2$ with increased UV energy up to $21.2J/cm^2$. Also zeta potential decreased with increased UV energy. The increased dyeability to cationic dyes may be due to the photochemically introduced anionic and dipolar dyeing sites on the PPS films surfaces.he photochemically introduced anionic and dipolar dyeing sites on the PPS films surfaces.

• 펄프종이기술
• /
• 제48권3호
• /
• pp.23-29
• /
• 2016

Effects of cationic polyvinylamine (PVAm) dry strength agent on effectiveness of optical brightening agent (OBA) during fine papermaking and the mechanism for brightness reduction of paper by PVAm was investigated by UV/Vis spectroscopy and turbidity measurement of OBA solution with PVAm. It was shown that PVAm reduced brightness of paper while opacity was not varied and tensile strength of paper was increased. Tetra-type OBA solution showed the peaks around the wavelength of 280 nm and 330 nm and the increase in the OBA concentration increased the UV absorbance in all wavelength. Addition of PVAm into the OBA solution decreased the UV absorbance at 280 nm. Turbidities of OBA and PVAm solutions were close to zero, respectively, while the turbidity value increased for the mixed solution of OBA and PVAm in various mixing ratios and the highest value was obtained when the mixing ratio of PVAm and OBA was 5:5, meaning that cationic PVAm formed complex with anionic OBA. In conclusion, cationic PVAm could form a complex with anionic OBA and that reduced UV absorbance, resulting in the reduced brightness of paper.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2016년도 춘계학술대회
• /
• pp.130-131
• /
• 2016

Although many metals contaminated sediment from coastal area contain both anionic and cationic heavy metals, the current remediation technologies are not effective for stabilize heavy metals of both anionic and cationic elements from contaminated coastal region. the present work investigated the efficiency and mechanism of immobilization of Fe, Zn, Cr, Cu, Pb and Cd metal solutions in modified zeolite based biostimulant ball. Biostimulant ball containing acetate, nitrate and sulphate which are enhance the activity of marine microorganisms and it can act as electron donors and electron acceptors. Modified zeolite and chelating agent is greatly enhance the metal stabilization due to increased immobility of the analysed metals. The XRD, FT-IR and SEM of modified zeolite which cheating agents containing heavy metals were investigated. The results indicated that heavy metals could be effectively immobilized in modified zeolite and chelating agents in BSB added sediment. The immobilization of heavy metals in modified zeolite and chelating agents along with BSB could be due to stabilize of heavy metal cations. Immobilization of heavy metals using BSB with modified zeolite and chelating agent has lower cost effect and enhance the sediment quality.

• 펄프종이기술
• /
• 제38권2호
• /
• pp.1-8
• /
• 2006

In this study a process simulation method was used to analyze the accumulation phenomena of anionic starch in the process white water as the closure level of a fine paper making process is increased. A pilot paper machine was used as a model process. Dynamic simulations of the influence of white water usage ratio and uncoated broke addition ratio on the variation of process variable was monitored as a function of time. Results from the dynamic simulations showed that the volume of reservoirs affected the dynamic behavior of the process. The dynamic behavior of flow rate and dissolved starch concentration in process units were different from each other. The speed of the change of dissolved starch concentration in process units was depend on the starting point of the change of dissolved starch concentration, the length of circulation loop, and the volume of reservoirs.

• Journal of Pharmaceutical Investigation
• /
• 제35권1호
• /
• pp.25-31
• /
• 2005

Depot system for local drug delivery using chitosan hydrogel has been developed to enhance the therapeutic efficacy and to prevent the severe side effect in whole body. Thus, we have prepared an injectable chitosan hydrogel containing liposomes to treat cancers clinically. Anionic liposomes incorporated to improve sustained release efficiency within chitosan hydrogel. The chitosan solution containing liposomes was designed to form a hydrogel complex at body temperature. The released behavior of doxorubicin from liposomes in chitosan hydrogel showed sustained-release caused by diffusion of doxorubicin from temperature responsive liposome into chitosan hydrogel. The chitosan hydorgel containing liposomes enhanced the therapeutic potency for the solid tumor in vivo system. Our results indicate that the liposomes in chitosan hydrogel represent a depot system for local drug delivery.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 추계학술발표회
• /
• pp.19-22
• /
• 2001

The effects of pH on the sequential sorption/desorption of chlorinated phenols (2-chlorophenol, 2.4-dichlorophenol and 2,4,5-trichlorophenol) in HDTMA-montmorillonite were investigated by maintaining pH 4.85 or 9.15 in the sequential batch sorption and desorption experiments. The chlorinated phenols are hydrophobic ionizable orginic compounds; they can exist as either neutral (pH << pKa) or anionic (pH >> pKa) forms. Among the tested chlorinated phenols, 2,4,5-trichlorophenol showed the highest sorption affinity at pH 4.85 as expected by the $K_{ow}$ . Neutral speciation at pH 4.85 exhibited higher sorption affinity than anionic speciation at pH 9.15. Our results indicates that desorption of chlorinated phenols is strongly dependent on pH of the aqueous phase. Freundlich model was used to analyze the single-solute sorption/desorption results. The ideal adsorbed solution theory(IAST) was employed to predict the hi-solute sorption/desorption equilibria.

• Carbon letters
• /
• 제13권4호
• /
• pp.212-220
• /
• 2012

Orange peel (OP) exhibits a sorption capacity towards anionic dyes such as reactive blue 19 (RB19). Cetyltrimethylammonium bromide (CTAB) as a cationic surfactant was used to modify the surface nature of OP to enhance its adsorption capacity for anionic dyes from an aqueous solution. Four adsorbents were investigated: the OP, sodium hydroxide-treated OP (SOP), CTAB-modified OP and CTAB-modified SOP. The physical and chemical properties of these sorbents were determined using nitrogen adsorption at 77 K and by scanning electron microscope and Fourier transform infrared spectroscopy techniques. The adsorption of the RB19 dye was assessed with these sorbents at different solution pH levels and temperatures. The effect of the contact time was considered to determine the order and rate constants of the adsorption process. The adsorption data were analyzed considering the Freundlich, Langmuir, Elovich and Tempkin models. The adsorption of RB19 by the assessed sorbents is of the chemisorption type following pseudo-first-order kinetics. CTAB modification brought about a significant increase in RB19 adsorption, which was ascribed to the grafting of the sorbent with a cationic surfactant.