• Journal of Pharmaceutical Investigation
• /
• v.40 no.3
• /
• pp.187-192
• /
• 2010

We aimed to evaluate the effect of temperature, pH, and light conditions on the stability of porcine placental extract (PPE)-loaded liposomes with different surface charges. The size distribution profiles and in vitro release patterns were investigated by dynamic light scattering method and spectrophotometry. The stability of PPE-loaded liposomes was affected by the surface charges of the liposomes. As compared to neutral and anionic liposomes, cationic liposome formulations showed significantly lower physical stability. At the test storage conditions of different temperatures and pHs, the mean sizes of cationic PPE-loaded liposomes substantially increased. In contrast, neutral and anionic liposomes did not reveal significant changes in mean sizes upon various storage conditions. The neutral and anionic liposomes showed no significant differences in the release profiles of PPE after storage at various temperatures and pHs. Our results indicate that anionic and neutral liposome compositions might be more suitable for the formulations of PPE providing the higher stability.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.1
• /
• pp.85-90
• /
• 1994

The flow properties of binder latices for paper coating were investigated, together with dynamic viscoelastic properties of latex films and electron micrographs of latices, under various conditions. The amphoteric latex, binder pigment latex and anionic latex were used in this work. The amphoteric latex has both anionic and cationic functional group on its surface. The binder-pigment with a core-shell structure has dual functions : plastic pigment and binder. The low shear viscosity of binder latices and clay slurry were measured with Brookfield vis cometer. At low-shear rates. the viscosity decreased with increasing particle size of latex. On the amphoteric latex surface, the carboxyl groups are assumed to be fully dissociated over the region of pH 9~12, but the density of negative groups seems to be increased because of the gradual decrease in the degree of dissociation of amino groups. Since the apparent particle size of latex increases with surface charge, the electroviscous effect can be observed. On the anionic latex surface, the charge density is assumed to be nearly constant above pH 8. However, below pH 8 the coagulation of particles could be observed probably because of the decrease in the charge density.

• Journal of the Korean Applied Science and Technology
• /
• v.14 no.1
• /
• pp.109-115
• /
• 1997

Fluorescent anionic oligo surfactants were synthesized by the condensing products of long chain alkylvinylether-maleic anhydride cooligomers and resorcinol including dye structures. Their various surface activities and dispersing action were studied on the aqueous solution. These oligo surfactants exhibited a remarkable surface tension lowering property, lower foaming and a large dispersing action for the particles of ${\alpha}-copper$ phthalocyanine blue. Further it was ascertained that the binding of oligo surfactant onto the pigment surface caused the deviation towards lower wavelengths at the maximum fluorescent intensity as compared with aqueous oligo surfactant solutions, These surface active properties of the oligo surfactants may be attributed to rigid and hydrophobic structure of dye groups, besides surface-active groups of alkylether groups and carboxylic group of the anionic oligo surfactants.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.3
• /
• pp.632-640
• /
• 1997

Changes in surface properties and detergency of sunactant mixtures were investigated in order to study the optimum mixing ratio of anionic and nonionic surfactants by measuring surface tension, interfacial tension, suspendability, and emulsification as a Amction of mixing ratio. Also, surface tension and detergency of the surfactant mixtures were determined with the increase of water-hardness or temperature. The results were as follows: the addition of NPE to anionic surfactant solutions (LAS or SDS) by 0.1 mole fraction remarkably decreased surface tension. NPE (n=15)/anionic surfactant mixtures showed a synergistic effect in lowering interfacial tension and emulsification, but NPE (n=7.5)/anionic surfactant mixtures did not. In suspension stability, however, synergism appeared when LAS or 505 was mixed with both of NPE's. With respect to the hydrophile of NPE, NPE (n=15) was more effective than NPE (n=i.5) in improving suspension stability. Detergency of LAS/NPE mixture changed almost linearly with mixing ratio, but that of SDS/NPE mixture increased remarkably by the addition of 0.1 or 0.2 mole fraction of NPE at all temperatures. As the temperature increased, surface tension of surfactant mixtures decreased and detergency was improved, but their synergistic effect decreased. In hard water, the mixtures showed better detergency than single surfactuant solutions.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.2
• /
• pp.109-114
• /
• 1990

The anionic transition metal hydrides $(HW(CO)_4P(OMe)_3\;^-,\;HW(CO)_5\;^-,\;HCr(CO)_5\;^-,\;HFe(CO)_4\;^-)$ react with transition metal alkyl $(CpMo(CO)_3(CH_3)$ to yield $CH_4\;and\;CH_3CHO$ in addition to the inorganic products $(CpMo(Co)_3\;^-$, etc.). The reaction of these anionic metal hydrides with CpMo(CO)3{CH2CH(CH2)2} may lead to an elucidation of the reaction mechanisms involved; the organic product distributions are among $CH_4,\;CH_2\;=\;CHCH_2CH_3$, and $CH_3CH(CH_2)_2$, depending upon the anionic metal hydride used. These anionic metal hydrides also are reported to undergo a hydride-halide exchange reaction with organic halides; therefore, these similar reactions have been compared in terms of leaving group ability $(CpMo(CO)_3\;^-\;vs.\;Br^-)$ and the mechanistic pathways.

• Nuclear Engineering and Technology
• /
• v.51 no.3
• /
• pp.738-745
• /
• 2019

Coprecipitation using hydrous ferric oxide (HFO) has been effectively used for the removal of radionuclides from radioactive wastewater. This work studied the dynamic behavior of HFO floc formation during the neutralization of acidic ferric iron in the presence of several radionuclides by using a photometric dispersion analyzer (PDA). Then the coagulation-flocculation system using HFO-anionic poly acrylamide (PAM) composite floc system was evaluated and compared in seawater and distilled water to find the effective condition to remove the target nuclides (Co-60, Mn-54, Sb-125, and Ru-106) present in wastewater generated in the severe accident of nuclear power plant like Fukushima Daiichi case. A ferric iron dosage of 10 ppm for the formation of HFO was suitable in terms of fast formation of HFO flocs without induction time, and maximum total removal yield of radioactivity from the wastewater. The settling time of HFO flocs was reduced by changing them to HFO-PAM composite floc. The optimal dosage of anionic PAM for HFO-anionic PAM floc system was approximately 1-10 ppm. The total removal yield of Mn-54, Co-60, Sb-125, Ru-106 radionuclides by the HFO-anionic PAM coagulation-flocculation system was higher in distilled water than in seawater and was more than 99%.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.3
• /
• pp.234-238
• /
• 1996

Second-order rate constants have been measured spectrophotometrically for the reaction of p-nitrophenyl acetate (PNPA) with morpholine, piperazine and piperidine in MeCN-H2O mixtures of varying compositions. The rate of the present aminolysis decreases upon additions of MeCN into H2O up to near 30-40 mole % MeCN and remains nearly constant upon further additions of MeCN. The reaction of PNPA with anionic nucleophiles, such as HO-, p-chlorophenoxide and butane-2,3-dione monoximate, has also exhibited two distinguishable reactivity zones. However, the reactivity trend for the anionic nucleophiles is quite different from the one obtained for the amine system, e.g. an initial rate decrease in the H2O-rich region followed by an increasing rate trend upon further additions of MeCN in the MeCN-rich region. The rate behaviors shown by the amine system in the MeCN-rich and by the anionic system in the H2O-rich region are unexpected based on the Hughes-Ingold rules. The present unusual rate trends have been attributed to changes in the solvent structure and pKa of the nucleophiles upon the addition of MeCN into H2O. The effect of solvent appears to be more significant for the TS than the GS, and the TS structure is considered to become tighter in the higher MeCN concentration.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.9
• /
• pp.1209-1216
• /
• 2022

To better understand the effects of PEGylation and biotinylation on the delivery efficiency of proteins, the cationic protein lysozyme (LZ) and anionic protein bovine serum albumin (BSA) were chemically conjugated with poly(ethylene glycol) (PEG) and biotin-PEG to primary amine groups of proteins using N-hydroxysuccinimide reactions. Four types of protein conjugates were successfully prepared: PEGylated LZ (PEG-LZ), PEGylated BSA (PEG-BSA), biotin-PEG-conjugated LZ (Bio-PEG-LZ), and biotin-PEG-conjugated BSA (Bio-PEG-BSA). PEG-LZ and Bio-PEG-LZ exhibited a lower intracellular uptake than that of LZ in A549 human lung cancer cells (in a two-dimensional culture). However, Bio-PEG-BSA showed significantly improved intracellular delivery as compared to that of PEG-BSA and BSA, probably because of favorable interactions with cells via biotin receptors. For A549/fibroblast coculture spheroids, PEG-LZ and PEG-BSA exhibited significantly decreased tissue penetration as compared with that of unmodified proteins. However, Bio-PEG-BSA showed tissue penetration comparable to that of unmodified BSA. In addition, citraconlyated LZ (Cit-LZ) showed reduced spheroid penetration as compared to that of LZ, probably owing to a decrease in protein charge. Taken together, chemical conjugation of targeting ligands-PEG to anionic proteins could be a promising strategy to improve intracellular delivery and in vivo activity, whereas modifications of cationic proteins should be more delicately designed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.4
• /
• pp.209-213
• /
• 1974

The isozymes of glutamic oxalacetic transaminase from young rice root were isolated by DEAE-cellulose column chromatography, and investigated some of their enzymic properties. Obtained results were summarized as follows: 1. 93 percent of GOT activity in rice root existed in supernatant fraction, and their specific activity exibited the same pattern. 2. The rice root contained two types of GOT isozyme; cationic and anionic GOT. It seemed that both of them were distributed in supernatant fraction. 3. GOT isozymes of rice root on the pH dependance showed their maximum activity at 7.4. 4. On the stability of GOT isozymes for temperature, anionic GOT was more unstable than cationic GOT. 5. Apparent Michaelis constant for L-aspartate of GOT isozymes from rice root showed 12-14mM in the cationic GOT and 16mM in the anionic GOT, respectively.

• Membrane and Water Treatment
• /
• v.8 no.3
• /
• pp.259-277
• /
• 2017

Adsorption is a widely used technique for the removal of dyes from wastewaters by variety of adsorbents. In this work, the main focus is on the potential assessment of anion exchange membrane for the removal of different dyes using batch system and investigation of experimental data by applying various kinetic and thermodynamic models. The removal of anionic dyes i.e., Eosin-B, Eriochrome Black-T and Congo Red by anion exchange membrane BII from aqueous solution was carried out and effect of various parameters such as contact time, membrane dosage, temperature and ionic strength on the percentage removal of anionic dyes was studied. The experimental data was assessed by kinetic models namely pseudo-first-order, pseudo-second-order, Elovich liquid film diffusion, Bangham and the modified Freundlich models equation have been used to analyze the experimental data. These results indicate that the adsorption of these anionic dyes on BII follows pseudo-second-order kinetics with maximum values of regression coefficient (0.992-0.998) for all the systems. The adsorption of dyes was more suitable to be controlled by a liquid film diffusion mechanism. The adsorptive removal of dye Eosin-B and Eriochrome Black-T were decreased with temperature and thermodynamic parameters such as free energy (${\Delta}G^o$), enthalpy (${\Delta}H^o$) and entropy (${\Delta}S^o$) for adsorption of dyes on membrane BII were calculated at 298 K, 308 K and 318 K. The values of enthalpy and entropy were negative for EB and EBT representing that the adsorption of these dyes on BII is physiosorptive and exothermic in nature. Whereas the positive values of enthalpy and entropy for CR adsorption on BII, indicating that its adsorption is endothermic and spontaneous in nature. It is evident from this study that anion exchange membrane has shown good potential for the removal of dyes from aqueous solution and it can be used as adsorbent for dues removal on commercial levels.