• Title/Summary/Keyword: Anhydrous condition

Search Result 25, Processing Time 0.022 seconds

Characteristics of composite membranes containing ionic liquid and acid for anhydrous high temperature PEFCs (무가습 고온 PEFC용 이온성 액체 및 산이 함유된 복합막의 특성)

  • Baek, Ji-Suk;Park, Jin-Soo;Park, Seung-Hee;Yang, Tae-Hyun;Park, Gu-Gon;Yim, Sung-Dae;Kim, Chang-Soo;Shul, Young-Gun
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2009.06a
    • /
    • pp.378-378
    • /
    • 2009
  • The ionic liquid-based sulfonated hydrocarbon composite membranes was prepared for use in anhydrous high temperature-polymer electrolyte fuel cells (HT-PEFCs). Ionic liquid behaves like water in the composite membranes under anhydrous condition. However the composite membranes show a low conductivity and high gas permeability as the content of ionic liquid increases due to its high viscosity and content of ionic liquid, respectively. Hence, in order to enhance the proton conductivity and to reduce the gas permeability of the composite membranes with low content of ionic liquids, the acid containing a common ion of ionic liquid was added to the composite membranes. The characterization of composite membranes was carried out using small-angle X-ray scattering (SAXS), thermogravimetric analyzer (TGA) and impedance spectroscopy. As a result, the composite membranes containing acid showed higher proton conductivity than those with no acid under the un-humidified condition due to a decrease in viscosity. In addition, the proton conductivity of composite membranes increased with increasing mole concentration of acid.

  • PDF

Synthesis of N,N-Dimethylacetamide from Carbonylation of Trimethylamine by Rhodium(I) Complex Under Anhydrous Condition

  • Hong, Jang-Hwan
    • Journal of Integrative Natural Science
    • /
    • v.8 no.4
    • /
    • pp.235-243
    • /
    • 2015
  • Rhodium(I)-complex of $[Rh(CO)_2I_2{^-}]$ catalyzed carbonylation of anhydrous-trimethylamine in the presence of methyl iodide to give DMAC (N,N-dimethylacetamide) in no solvent. The catalyst had been reused 20 times, the analyses and distillation of collected products showed that the yields of DMAC, MAA (N-methylacetamide), and DMF (N,N-dimethylformamide) were 82.3%, 12.6%, and 4.4%. The conversion rate of trimethylamine was 99 % and the selectivity of DMAC was 82.3% with TON (Turnover Number) of 700. Stepwise procedure of inner-sphere reductive elimination for the formation of DMAC was suggested instead of acyl iodide intermediate.

Ash Reduction and the Change of Fuel Properties for Spent Mushroom Substrates by Acid Solution Extraction (산(acid) 첨가 용매 추출에 의한 폐버섯배지 회분 감소 및 연료특성 변화)

  • Lee, Eun-Jee;Oh, Doh-gun;Kim, Sun-Mee;Park, Eun-Suk;We, Sung-Gook
    • Korean Chemical Engineering Research
    • /
    • v.48 no.3
    • /
    • pp.365-374
    • /
    • 2010
  • The ash reduction effects and fuel property changes of spent mushroom substrates by acid solution extraction, and the production possibilities of wood pellet fuel using them were studied. The ash weight of spent Pleurotus eryngii substrates was reduced from 8.81%(w/w) to 3.33%(w/w), and calorific value was increased from 3,958.3 kcal/kg to 4219.2 kcal/kg when extracted with a mixture of Acetic acid 2%(w/w) and Anhydrous citric acid 1%(w/w) in condition of liquid ratio 1:8, extraction temperature $55^{\circ}C$ and extraction time 180 min. The ash weight of spent Flammulina velutipes substrates was reduced from 14.91%(w/w) to 4.07%(w/w), and calorific value was increased from 4,190.3 kcal/kg to 4,219.2 kcal/kg when extracted with a mixture of Acetic acid 3%(w/w) and Anhydrous citric acid 1%(w/w) in condition of liquid ratio 1:8, extraction temperature $65^{\circ}C$ and extraction time 180 min. The ash weight of spent Pleurotus osteratus substrates was reduced from 3.31%(w/w) to 0.59%(w/w), and the smallest reduction was in calorific value from 4,558.6 kcal/kg to 4,216.2 kcal/kg when extracted with a mixture of Acetic acid 1%(w/w) and Anhydrous citric acid 1%(w/w) in condition of liquid ratio 1:8, extraction temperature $65^{\circ}C$ and extraction time 180 min.

Study on Polymorphism of Cimetidine (시메티딘의 다형에 관한 연구)

  • Sohn, Young-Taek;Kim, Ki-Soo
    • Journal of Pharmaceutical Investigation
    • /
    • v.23 no.2
    • /
    • pp.81-87
    • /
    • 1993
  • Five crystalline forms of cimetidine, four anhydrous and a monohydrate, have been prepared, and their thermal behavriours have been studied by differential thermal analysis and thermo-gravimetry. The dissolution rates of the five forms were determined in distilled water at $37^{\circ}C$. The results showed a significant difference in the dissolution rate. Polymorphic transformation occurred spontaneously during storage at room condition and was accelerated by applied energy during formulation process-milling.

  • PDF

Phosphoric Acid-doped SDF-F/poly(VI-co-MPS)/PTFE Membrane for a High Temperature Proton Exchange Membrane Fuel Cell

  • Lee, Jong-Won;Yi, Cheol-Woo;Kim, Keon
    • Bulletin of the Korean Chemical Society
    • /
    • v.32 no.6
    • /
    • pp.1902-1906
    • /
    • 2011
  • Sulfonated poly(fluorinated arylene ether)s (SDF-F)/poly[(N-vinylimidazole)-co-(3-methacryloxypropyl-trimethoxysilane)] (poly(VI-co-MPS))/poly(tetrafluoroethylene) (PTFE) is prepared for a high temperature proton exchange membrane fuel cell (PEMFC). The reaction of the membrane with phosphoric acid forms silicate phosphor, as a chemically bound proton carrier, in the membrane. Thus-formed silicate phosphor, nitrogen in the imidazole ring, and physically bound phosphoric acid act as proton carriers in the membrane. The physico-chemical and electrochemical properties of the membrane are investigated by various analytical tools. The phosphoric acid uptake and proton conductivity of the SDF-F/poly(VI-co-MPS)/PTFE membrane are higher than those of SDF-F/PVI/PTFE. The power densities of cells with SDF-F/poly(VI-co-MPS)/PTFE membranes at 0.6 V are 286, 302, and 320 mW $cm^{-2}$ at 150, 170, and 190 $^{\circ}C$, respectively. Overall, the SDFF/poly(VI-co-MPS)/PTFE membrane is one of the candidates for anhydrous HT-PEMFCs with enhanced mechanical strength and improved cell performance.

Preparation of Freeze-dried Cefazolin Sodium Bulk Powder with Good Flowability (유동성이 우수한 분체특성을 갖는 세파졸린 나트륨 진공동결건조 분말의 제조)

  • Cho, Jeong-Sik;Jeong, Eun-Ju
    • YAKHAK HOEJI
    • /
    • v.42 no.3
    • /
    • pp.284-289
    • /
    • 1998
  • The effect of reaction condition, solvent addition and thermal treatment on the bulk density, crystallinity and chemical properties of the freeze-dried cefazohn sodium was inves tigated to prepare the cefazolin sodium powder for injection with good flowability. Crystalline cefazolin sodium powder with high untapped-bulk density (about 45%) and low compressibility (about 40%) was obtained by solvent addition to the very highly concentrated cefazohn sodium solution followed by subsequent thermal treatment before freeze-drying. The desirable solvent was low substituted alcohol such as isopropyl alcohol and anhydrous ethanol with the final concentration of about 9%. The pH adjustment and nitrogen gas purging during the reaction did not give significant effect on the chemical properties such as content, color, transmittance and pH of the reconstituted cefazolin sodium aqueous solution.

  • PDF

An Eurpium(III) Hydrolytic Catalyst Favoring Anionic Phosphate Esters over Phosphate Triester'

  • Yun, Chang Won;O, Sun Jin;Jeon, Yeong Jin;Choe, Yeong Seo;Son, Yun Gyeong;HwangBo, Seok;Gu, Ja Gang;Park, Jun Won
    • Bulletin of the Korean Chemical Society
    • /
    • v.22 no.2
    • /
    • pp.199-204
    • /
    • 2001
  • A Cryptate (221) having a short alcohol pendant (2) was metallated with europium(Ⅲ) in anhydrous condition, and its hydrolytic activity for phosphate esters at neutral pH was examined. While the activity for the phosphate diester and monoester is comparable to that of the parent metal complex [1Eu]3+, its hydrolytic activity towards a phosphate triester is significantly suppressed. Potentiometric titration and luminescence spectroscopic studies for the equilibrium behavior of the complex in solution suggest that a dimer formation through the metal hydroxides as well as the pendant alcohol is likely to happen. The low hydrolytic activity for the triester seems to be associated with the dimer formation.

A Study on the Structure of Bismuthsubgallate (차몰식자산(次沒食子酸)비스머스의 구조연구(構造硏究))

  • Lah, W.L.;Choo, S.Y.;Lee, G.J.;Han, K.S.
    • Journal of Pharmaceutical Investigation
    • /
    • v.5 no.3
    • /
    • pp.50-57
    • /
    • 1975
  • Bismuthsubgallate is a compound of indefinite composition containing bismuth and gallic acid. Because its structure was indefinite, many papers have been reported for it. But these are different one another and the relationship between the physical properties, structure and manufacturing condition has not been yet reported. In this experiment, bismuthsubgallate was prepared from bismuthsubgallate and gallic acid in an acetic medium at $65^{\circ}$, and dried at four different temperatures $30^{\circ}\;65^{\circ}\;105^{\circ}\;and\;155^{\circ}$. And some of the other relative bismuth organic compounds were prepared. To each product. elemental analysis, IR spectra and DTA, TGA curves were determined. These results revealed the followings; l. The structure of bismuthsubgallate is comfirmed as a complex form of gallomonohydroxo-bismutic acid monohydrate and its yellow colour dependent upon complex anion in the structure. 2. According to the drying temperature, the hydrate content of bismuthsubgallate is quite different: dihydrate at room temperature, mono-hydrate at. $65^{\circ}$, anhydrous at $105^{\circ}$ and decomposed partial1y oganic substance of the structure above $155^{\circ}$.

  • PDF