• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1989년도 추계 학술발표회 강연집
• /
• pp.1.3-25
• /
• 1989

This paper describes procedures and the results of mineralogical, fabric and pore sixte analyses perforied on four shales to understand time-dependent deforiation behav iour of swell ins shales better. Mineralogical compositions of theme shales are eBtablished froi the results of X-ray diffraction snalysis and chemical analyses. The importance of the fabric in the understanding of swelling behaviour of shales is demonstrated using Scanning Electron Microscope (SRI). The change in pore sixte distribution during the process of swelling is investigated by measuring pore size distribution before and after free swell test. The results Of the Present study imply that the swelling of Shales studied is not attributed to minerals like pyritei anhydrite or swelling clay minerals. The anisotropic swelling behaviour of shales studied ray be explained by fabrics of theme shales and the difference in them. The swelling of theme shales is found to be accoipanied by increase in the volute of pores.

• 자원환경지질
• /
• 제32권6호
• /
• pp.599-609
• /
• 1999

Talc durg has been used at Oriental Medical Hospital of Kyung San University, and was analysed for mineralogical and geochemical studies. It consists mainly of talc with small amount of tremolite, dolomite and bursite, and its chemical compositions of MgO 31.65% and $SiO_2$ 61.0%, and cotain less inpurtities. Moreover, talc from the Dong Yang Talc mine is associated with calcite, gypsum and anhydrite, which belong to more soluble mineral drugs than talc, and contains Ca and Fe. These elements may give at least medical medical to talc durg as in the case of actinolite. Therfore, talc of high quality from the Dong Yang Tacl Mine may be used instead of imported expensive talc durg. Diagrams of log $a_{Mg^{2+}}$-pH and log $a_{Mg^{2+}}/a{\array{2\\H^+} $-log $a_{H_4SiO_4}$- may be used as basic data to predict and examine soluble contents of durg for medical experiments.

• 한국치위생학회지
• /
• 제8권2호
• /
• pp.53-66
• /
• 2008

There was to purpose of this study improves analyzing cause that prosthesis brings bite engaging that is inaccurate in patient's mouth, when supposed that all conducts that do in operatory and dental laboratory are perfect. Impression did check bite by alginate impression material and polymerization style silicon impression material that use usually in presence at a sickbed Irreversibility, hydrocolloid, alginate impression material washed in flowing water and poured anhydrite after wait about 8 minutes so that region that charge interest after impression check bite may become undoing. And hydrophile property addition polymerization style impression material poured anhydrite after blow 30 considering impression material dwell time and H2 gas occurrence time (5~15 minute) after have washed in flowing water. I got each 7 models, result that manufactures total 28 and measures by third dimension measuring instrument (Meteo, Korea) following sequence curing in tray holder and floor 1, By Alginate impression when is hardened in tray holder and when is hardened in the floor after do check bite, SPH 4, SPH5 all as there is synonymy appeared(P<0.05). By in case do not use average 0.1741 in case use tray holder in 0.0447 SPH5s in case do not use average 0.2838 pastas in case use tray holder in SPH4 0.0309, When did not use both SPH4 and SPH5 tray holder, when used tray holder, 1 appeared more greatly. 2. By amity sex addition polymerization style silicon impression when is hardened in tray holder after do check bite and when is hardened in the floor SPH 4, a11 of the SPH5s very big synonymy be(P>0.05). And in case use tray holder in 0.000657 pasta SPH5s in case do not use average 0.000129 pastas in case use tray holder in SPH4 average 0.000114 pastas, by in case do not use 0.000757, I appeared more greatly when used tray when did not use both SPH4 and SPH5 tray holder, but 1 appeared is not level to keep in mind(Table 8~9). 3 SPH4 was looked very big mindfulness in model that manufacture doing impression check bite by Alginate and model that do impression check bite by amity sex accessory penalty silicon without using tray holder(P< 0.001). I use tray holder and SPH4 did not appear synonymy in model that manufacture doing impression check bite by Alginate and model that do impression check bite by amity sex accessory penalty silicon(P>0.05). Study finding of above when see synthesis Alginate certainly tray holder use must and I could know that hardening method does not exert big influence on volume stability if remove impression sieve of excess because amity sex accessory penalty silicon passes over tray, Also, Alginate impression material previewed can get heading a conspiracy style that volume stability of accessory penalty silicon impression material degree is if use tray holder.

• 자원리싸이클링
• /
• 제7권5호
• /
• pp.33-40
• /
• 1998

명반석[$K_2$$SO_4$.$Al_2$($SO_4$)$_3$.(OH)$4Al_3$]과 석회석(CaCo$_3$)의 혼합소성에서 무수석고(CaSO$_4$)의 생성은 주로 $SO_3$(g)와 CaO(s)가 발생되는 온도와 속도에 의존된다. 그러므로 본 연구에서는 먼저 명번석의 열분해로 생성되는 물질과 $SO_3$(g)가 이탈되는 온도와 속도를 조사하였다. 상압의 공기분위기에서 명반석은 $500~580^{\circ}C$에서 탈수되어 (SO$KAl_4$)$_2$와 $Al_2$$O_3$로 분해된다. 이때에 탈수되는 속도는 kt=${1-(1-{alpha}^{1/3})}^{2}}$에 일치하고, 탈수 활성화에너지는 약 73.01kcal/mol로 계산된다. $SO_3$(g)는 $580~700^{\circ}C$에서도 서서히 발생되지만 $700~780^{\circ}C$에서는 급격히 발생된다. KAl($SO_4$)$_2$가 분해되는 속도는 kt=$1-{(1-{alpha})}^{1/3}$에 일치하며, 분해활성화에너지는 약 66.84kcal/mol로 계산된다. 명반석광석에 함유된 $SiO_2$와 kaolinite는 $SO_3$(g)의 발생온도 및 속도에는 거의 영향을 끼치지 않는다.

• 한국석유지질학회지
• /
• 제3권1호
• /
• pp.16-27
• /
• 1995

전기마이오세의 템블러층은 캘리포니아의 케틀만노스돔 유전에서 중요한 사암의 저류층을 이루고 있다. 이 층의 사암은 대부분이 아코스의 성분을 가지나 최하부에는 많은 화산암의 암편이 함유되어 있다. 템블러층 사암에서 장석이 변질작용을 받기 이전에 일어난 속성작용의 단계를 순서대로 열거하면 초기의 방해석, 백운석, 석영, 알바이트, 녹니석과 스멕타이트의 혼합층 점토광물, 스멕타이트와 무수석고의 교질작용이 일어났다. 장석과 관련되어 일어난 속성작용으로는 사장석의 알바이트화작용, 후기의 방해석과 러몬타이트의 교질작용과 교대작용, 사장석의 용해, 카올리나이트의 교질작용이 있다. 사장석의 알바이트화작용과 후기의 방해석과 러몬타이트의 교질작용은 템블러층사암이 온도 약 130도 정도로 가장 깊이 매몰되었을 때 일어났다. 사장석 중 화산기원의 사장석이 선택적으로 알바이트화작용을 받았다. 이 사암층에 일어난 대부분의 속성작용은 약 1백만년 전에 일어난 이 층의 융기 이전에 일어났다. 융기를 할 때부터 석유가 배태되기 이전에 사장석의 용해와 카올리나이트의 교질작용이 일어났다. 이 때의 속성작용은 카올리나이트가 사장석이 용해되는 장소 바로 옆에 일어난 점으로 미루어 볼 때 아마도 지구화학적으로 폐쇄된 환경에서 일어났음을 짐작할 수 있다. 이 층이 가장 깊이 매몰이 일어났을 당시 알바이트화작용을 겪지 않았던, 화산기원 사장석의 변질을 받지 않은 부분과 약간의 심성암 기원의 사장석이 선택적으로 용해되어 사장석의 용해공극을 형성하였다. 사장석의 용해작용과 탄산염과 무수석고 교질물의 용해작용이 일어나 이차공극이 형성되었는데, 이차공극은 유기물의 카타제네시스동안 발생한 유기산이 함유되 어 있는 산성의 공극수에 의하여 형성된 것으로 해석된다.

• 상하수도학회지
• /
• 제34권2호
• /
• pp.115-125
• /
• 2020

This study was aimed to examine inorganic fouling and fouling reduction method in direct contact membrane distillation(DCMD) process. Synthetic seawater of NaCl solution with CaCO₃ and CaSO₄ was used for this purpose. It was found in this study that both CaCO₃ and CaSO₄ precipitates formed at the membrane surface. More fouling was observed with CaSO₄(anhydrite) and CaSO₄·0.5H₂O(bassanite) than CaSO₄·2H₂O(gypsum). CaCO₃ and gypsum were detected at the membrane surface when concentrates of SWRO(seawater reverse osmosis) were treated by the DCMD process, while gypsum was found with MED(multi effect distillation) concentrates. Air backwash(inside to out) was found more effective in fouling reduction than air scouring.

• 한국광물학회지
• /
• 제21권2호
• /
• pp.193-200
• /
• 2008

배연탈황석고 및 인산부산석고에 함유된 부착수분을 마이크로파에 의한 직접 내부 가열 방법으로 증발시켜 건조하고자 하였다. 700 W, 1,000 W, 1,700 W의 출력인 마그네트론에서 발생된 2.45 GHz의 마이크로파로 배연탈황석고와 인산부산석고를 가열한 결과, 마이크로파 출력의 세기를 700 W에서 1,700 W로 높임에 따라 부착수의 증발시간이 10분에서 3분으로 단축되었고, 이수석고는 베타형 반수석고로 변질되었다. 그러나 베타형 반수석고는 무수석고로 변질되지 않았다.

• Nuclear Engineering and Technology
• /
• 제49권2호
• /
• pp.450-457
• /
• 2017

Waste Isolation Pilot Plant repository releases are evaluated through the application of modified parameters to simulate accelerated creep closure, include capillary pressure effects on relative permeability, and increase brine and gas saturation in the operations and experimental (OPS/EXP) areas. The modifications to the repository model result in increased pressures and decreased brine saturations in waste areas and increased pressures and brine saturations in the OPS/EXP areas. Brine flows up the borehole during a hypothetical drilling intrusion are nearly identical and brine flows up the shaft are decreased. The modified parameters essentially halt the flow of gas from the southern waste areas to the northern nonwaste areas, except as transported through the marker beds and anhydrite layers. The combination of slightly increased waste region pressures and very slightly decreased brine saturations result in a modest increase in spallings and no significant effect on direct brine releases, with total releases from the Culebra and cutting and caving releases unaffected. Overall, the effects on total high-probability mean releases from the repository are insignificant, with total low-probability mean releases minimally increased. It is concluded that the modified OPS/EXP area parameters have an insignificant effect on the prediction of total releases.

• 한국디지털건축인테리어학회논문집
• /
• 제12권3호
• /
• pp.59-66
• /
• 2012

Autoclaved Lightweight Concrete(ALC) features such as a high performance insulation, the fire resistance, the advantage of easy handing construction, and lightweight panels applied the curtain wall system. ALC materials are certified as non-toxic environmental and eco-friendly productions. But ALC external panels mixed with blast furnace slag pounder and silica fume have to be coated with a stucco compound or plaster because of resisting the ambient environment. This study is that mixing tests to evaluate a performance analysis of exterior paints to be make-up pigments(organic or inorganic) coated with panel surface. Testing compared by KS F 2476; flow test, KS F 2426; compression strength test, KS F 2762; bond strength test. In results, the case of the inorganic binder, ratio of alumina cement : anhydrite is 90:10 to 80:20 at the highest level of intensity. In the case of the organic binder, adhesive strength rating at surface of ALC, the pullout strength is below 0.5 $N/mm^2$ but the normal concrete is over 2.0$N/mm^2$. A contents ratio of EVA resin is more than 3% and then bond strength is effectively.

• Current Optics and Photonics
• /
• 제1권4호
• /
• pp.402-411
• /
• 2017

Combined LIBS-Raman spectroscopy has been widely studied, due to its complementary capabilities as an elemental analyzer that can acquire signals of atoms, ions, and molecules. In this study, the classification of polymorphs was performed by laser-induced breakdown spectroscopy (LIBS) to overcome the limitation in molecular analysis; the results were verified by Raman spectroscopy. LIBS signals of the $CaCO_3$ polymorphs calcite and aragonite, and $CaSO_4{\cdot}2H_2O$ (gypsum) and $CaSO_4$ (anhydrite), were acquired using a Nd:YAG laser (532 nm, 6 ns). While the molecular study was performed using Raman spectroscopy, LIBS could also provide sufficient key data for classifying samples containing different molecular densities and structures, using the peculiar signal ratio of $5s{\rightarrow}4p$ for the orbital transition of two polymorphs that contain Ca. The basic principle was analyzed by electronic motion in plasma and electronic transition in atoms or ions. The key factors for the classification of polymorphs were the different electron quantities in the unit-cell volume of each sample, and the selection rule in electric-dipole transitions. The present work has extended the capabilities of LIBS in molecular analysis, as well as in atomic and ionic analysis.