• Polymer(Korea)
• /
• v.28 no.6
• /
• pp.531-537
• /
• 2004

Various half-ester acrylates were prepared from anhydrides and 2-hydroxyethyl acrylate. Photocurable epoxy modified acrylates were prepared from synthesized half-ester acrylate and neopentylglycol diglycidylether. Physical properties such as hardness, yellowing, tensile strength and elongation were tested and compared as the structure of oligomer in cured-film differs. It was found that viscosity of neopentylglycol diglycidylether-hexahydrophthalic anhydride (NP-HA) was highest. Hardness and tensile strength of photocrosslinked neopentylglycol diglycidylether-hexahydrophthalic anhydride were better than those of other photocrosslinted epoxy acrylates. And 5% weight loss temperature of photocrosslinked neopentylglycol diglycidylether-hexahydrophthalic anhydride was higher than those of other photocrosslinked epoxy acrylates. Value of yellow index of photocrosslinked neopentylglycol diglycidyl ether-succinic anhydride (NP-SA) was lower than the other products.

• Journal of the Korean Chemical Society
• /
• v.13 no.4
• /
• pp.273-280
• /
• 1969

The MO's of maleic anhydride are calculated using the parameter values, $h_{o}$.= 1, $h_{o}$:= 2, $k_{c=o}$= 1, $k_{c-o}$= 0.8, and ${\delta}_{{\alpha}_n}=2{\times}(0.3)^n$. With these MO's the interaction energies of the photochemical reaction of maleic anhydride (MA) with benzene are calculated using intermolecular orbital theory. It is shown that there are cases where the interaction energy includes a constant term and this term takes a great role in the photochemical interaction energy, and that with the calculated interaction energies the reaction mechanism is quite well explained. And it is proved that the photochemical reaction is possible for the second addition step of MA to benzene, and that the MA-benzene adduct should have the well-known stereochemical structure.

• Polymer(Korea)
• /
• v.38 no.5
• /
• pp.632-639
• /
• 2014

2,7-Dihydroxynaphthalene bis(trimellitate anhydride) (2,7-TA) was synthesized from trimellitic anhydride chloride and 2,7-dihydroxynaphthalene. Copolyimides (Co-PI) containing ester group were synthesized from 2,7-TA, pxylylenediamine, and 2,2'-bis(trifluoromethyl)benzidine (TFB). The Co-PI films were obtained from poly(amic acid) by solution casting through thermal imidization on a glass plate. The thermal property, gas permeation, and optical transparency of the Co-PI films with various TFB monomer contents were investigated. These Co-PIs could be solution-cast into a flexible and tough film. The cast Co-PI films exhibited high optical transparency with a cut-off wavelength of 370~395 nm in UV-vis. absorption and a low yellow index value of 3.55~7.63. The thermal property of Co-PI films increased linearly with increasing TFB content. However, the oxygen permeation and optical transparency of the Co-PI films was found to worsen with increasing TFB content.

• Elastomers and Composites
• /
• v.47 no.2
• /
• pp.162-167
• /
• 2012

Surface modification of macromolecules renders a progressive and favorable method to enhance the properties of polymeric materials and improves conductivity, wettability, stability, adhesion, antibacterial properties, etc. of polymeric surfaces without deterioration of the polymer bulk properties. Polyolefins such as polyethylene and polypropylene were grafted with maleic anhydride(MAH) as a functional monomer in solution. Evidence for grafting was shown with FTIR measurement. The grafting ratio was determined from chemical titration. The higher MAH loading, the lower contact angle(${\theta}$) was obtained. With the increasing content of MAH, melting temperature($T_m$) of maleic anhydride grafted polymer decreased while decomposition temperature($T_d$) of maleic anhydride grafted polymer increased.

• Elastomers and Composites
• /
• v.49 no.1
• /
• pp.59-65
• /
• 2014

In this study, in order to complete curing reaction of the molding compound comprising an epoxy/anhydride at $71^{\circ}C$ for 40 hours, metal coordination complexes such as cobalt (II) acetylacetonate, potassium acetylacetonate, iron (III) acetylacetonate and chromium (III) octoate as a catalyst were applied to the epoxy/anhydride compounds respectively. The weight ratio of an epoxy part/an anhydride part was adjusted to improve the mechanical properties of the molding compound. According to the experimental results, an epoxy/anhydride compound containing chromium (III) octoate showed a high conversion at $71^{\circ}C$ for 40 hours as well as a proper processability at room temperature among the several metal coordination complexes. For the mechanical properties of the cured epoxy/anhydride compound, the compounds containing weight ratio from 0.9/1 to 0.5/1 of the epoxy part/anhydride part with chromium (III) octoate showed the high flexural strength, and higher compressive strength was shown with increasing of the hardener part.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.703-704
• /
• 2009

• Bulletin of the Korean Chemical Society
• /
• v.25 no.6
• /
• pp.777-778
• /
• 2004

• YAKHAK HOEJI
• /
• v.28 no.1
• /
• pp.17-20
• /
• 1984

Synthetic procedures to synthesize fenbufen-acetaminophen ester were searched by acid chloride method, DCC method and mixed acid anhydride method. The compound was synthesized by DCC method and mixed acid anhydride method but could not be synthesized by acid chloride method. Its anti-inflammatory activity was superior to acetaminophen and similar to fenbufen.

• Clean Technology
• /
• v.19 no.4
• /
• pp.393-400
• /
• 2013

In this study, Polyethylene wax, which was produced in manufacturing process of high density polyethylene was grafted with maleic anhydride (MAH). The influences of reaction parameters on the graft polymerization as well as the effect of hydrolysis of the anhydride functions were investigated. The results show that the grafting degree increased and conversion of maleic anhydride decreased with an increase in MAH monomer content. This means the highest grafting efficiency for the reaction can be met when MAH monomer content is about 15 wt%. DCP (dicumyl peroxide) and DTBP (di-tert-butyl peroxide) have been used as the initiator and the highest yield of grafting was obtained when the initiator content is about 0.5 wt%. However, It can be seen that the gel content values of this polyethylene wax grafted MAH were below 2%. It was also observed that the grafting degree increased with an increase in reaction temperature and the maximum value was reached 2 hours later. Although MAH functions grafted onto polyethylene wax were mainly in the carboxylic acid forms, some anhydride form of MAH appeared in over 5% of grafting degree. As a result of hydrolysis reaction, it was observed that the conversion of anhydride group into carboxylic acid group was reached up to 10%.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.3
• /
• pp.251-258
• /
• 1983

This experiment was carried out to investigate the capability of production of artificial milk for leaf protein concentrate (LPC). Chloroplastic protein and cytoplasmic protein were extracted from leaves of Dystaenia takeshimana Nakai and LPC was extracted from leaves of Italian ryegrass to increase the functional properties of LPC as a level of milk casein. One gram of chloroplastic protein and cytoplasmic protein and 1g of LPC were succinylated by addition of succinic anhydride 0.1, 0.25, and 1g respectively. Their functional properties were investigated in this experiment. The results obtained were summarized as follows: 1. The non-succinylated LPC showed a higher value in bulk density than the chloroplastic protein, the cytoplasmic protein and LPC succinylated by addition of succinic anhydride 0.1, 0.25, and 1g respectively. Nevertheless, succinylation had an enhancing effect as indicated by the rises as the degrees of succinylation was increased. 2. Although solubility of non-succinylated LPC was lower than that of milk casein, succinylation caused an effective increase in the solubility of the protein and LPC. 3. Water absorption and fat absorption of succinylated LPC were twice to eight times higher than those of milk casein. Fat absorption was not influenced to the extent by succinylation as the water absorption. Excessive succinylation resulted in the decrease of both water absorption and fat absorption. 4. Emulsifying activity and emulsion stability were increased in proportion to the succinylated degree of LPC. More than 10% increase in the amount of succinic anhydride resulted in an apparent increase in emulsifying activity and emulsion stability. Besides, the succinylated LPC showed more excellent functional properties in emulsifying activity and emulsion stability than milk.