• The Journal of Korean Academy of Prosthodontics
• /
• v.20 no.1
• /
• pp.83-91
• /
• 1982

The mandibular movement during mastication has been studied, however there is still much controversy, therefore the purpose of this study was to establish the fundamental data in order to provide the functional occlusion and information in prosthodontic treatment, and the diagnosis of temporomandibular joint disorder. The author analyzed the characteristics of the border and masticatory movements using the Mandibular Kinesiograph. The value, direction, deviation angulation of the border and masticatory movements were studied on the sagittal and frontal planes in 24 male subjects age of 22-28 without orofacial problems. The obtained results were as follows: 1. The values of border movement on the sagittal plane were an average of $25.81{\pm}5.14mm$ in vertical component and $24.37{\pm}3.76mm$ in ant-post component, and the posterior terminal hinge movement, $9.31{\pm}3.62mm$ in vertical component and $7.59{\pm}2.65mm$ in ant-post. component. 2. The distribution range of the masticatory movement within the border movement was an average of $19.2{\pm}12.81%$ of maximum ant-post, values and $55.5{\pm}16.1%$ of maximum values of border movement, and the movement path, for the most part, was directed to posterior deviation and ranged from 0.98 to 12.00mm, on an average of $5.15{\pm}3.49mm$. 3. On the frontal plane, a number of left and right deviation in 24 subjects was same, however, the right deviation was an average of $2.51{\pm}1.67mm$ compared with the left deviation. 4. On the frontal plane, the point of maximum lateral deviation was an average of $49.7{\pm}11.0%$ of maximum opening values. 5. The angulation between the terminal hinge movement path and the masticatory path was an average of $24.00{\pm}4.65$.

• The korean journal of orthodontics
• /
• v.28 no.6 s.71
• /
• pp.981-989
• /
• 1998

Positions, angulation and mesiodistal dimension of lower incisors are important in esthetics, occlusion and post-treatment stability of tower arch. When lower incisor is congenitally missing, problems such as increased overjet and overbite, closing in of adjacent teeth and size/space discrepancies may occur. When creating treatment plans, incisor position and angulation, lip support, anteroposterior skeletal relationship canine-molar relationship, overjet overbite, remaining growth potential, crowding and anterior tooth ratio have to be considered. For an accurate analysis of incisal size discrepancy, diagnostic model set-up may be helpful. The two patients in this presentation both had two lower incisor missing, but the degree of crowding, skeletal relationship, lip support, molar relationship are different and therefore treatment plan was different as well. Long term follow-up may be necessary for stability and retention.

• Journal of Korean Neurosurgical Society
• /
• v.47 no.4
• /
• pp.278-281
• /
• 2010

Objective : For the treatment of osteoporotic vertebral compression fracture, percutaneous vertebroplasty (PVP) is currently widely used as an effective and relatively safe procedure. However, some patients do not experience pain relief after PVP. We performed several additional PVP procedures in those patients who did not have any improvement of pain after their initial PVP and we obtained good results. Our purpose is to demonstrate the effective results of an additional PVP procedure at the same previously treated level. Methods : We reviewed the medical records and the radiologic data of the PVP procedures that were performed at our hospital from November 2005 to May 2008 to determine the patients who had undergone additional PVP. We identified ten patients and we measured the clinical outcomes according to the visual analogue scale (VAS) score and the radiologic parameters, including the anterior body height and the kyphotic angulation. Results : The mean volume of polymethylmethacrylate injected into each vertebrae was 4.3 mL (range: 2-8 mL). The mean VAS score was reduced from 8 to 2.32. The anterior body height was increased from 1.7 cm to 2.32 cm. The kyphotic angulation was restored from 10.14 degrees to 2.32 degrees. There were no complications noted. Conclusion : The clinical and radiologic outcomes suggest that additional PVP is effective for relieving pain and restoring the vertebral body in patients who have unrelieved pain after their initial PVP. Our study demonstrates that additional PVP performed at the previously-treated vertebral levels could provide therapeutic benefit.

• Journal of Korean Foot and Ankle Society
• /
• v.1 no.2
• /
• pp.95-101
• /
• 1997

Hallux valgus has been characterized by a valgus deformity of the great toe at the metatarsophalangeal joint, along with medial deviation of the first metatarsal, and by three components. First, there is a valgus angle more than $20^{\circ}$ at the first, metatarsophalangeal joint. Second, there is a greater angle than $9^{\circ}$ between the first. and second metatarsals. Third, there is bursal hypertrophy at the medial eminence of the first metatarsals head. The etiology is multifactorial and many procedures have been reported in the treatment of hallux valgus. Most of the procedures are directed towards pain relief, correction of deformity, and preservation of dorsiflexion in the first metatarsophalangeal joint. One such treatment is the Modified chevron osteotomy. It is technically simple, and provides greater stability than a standard osteotomy, and allows early ambulation after surgery. We a reviewed 19 cases with 13 patients of hallux valgus deformity. They were all treated with the Modified chevron osteotomy at the Department of Orthopedic Surgery, Choong ang Gil Hospital, between June 1988 and May 1994. The results of the study were as follows; 1. The mean age was 36 years. Three patients(5 case) were male and ten patients(14 cases) were female. 2. The mean value of the hallux valgus angle was $34.1^{\circ}$, and the first to second intermetatarsal angle was $12.1^{\circ}$, preoperatively. These angles were corrected to $15.8^{\circ}$ and $8.5^{\circ}$, respectively. 3. The metatarsalgia subsided in 17 cases (89.5%). avascular necrosis, non union, and dorsal angulation complicatious were nonexistant. Early bone healing occurred in all cases. 4. The Modified chevron osteotomy is technically simple. It provides excellent pain relief, early ambulation, increased mechanical stability, and many avoids many complications such as AVN, non-union, and dorsal angulation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.5
• /
• pp.633-643
• /
• 2007

Statement of problem: Recently there are on an increasing trend of using implants-especially in edentulous mandible of severly alveolar bone recessed. Purpose: The aim of this study was to analyze the displacement and stress distribution of various mandibular implant-retained overdenture models supported by two implants in interforaminal region under the occlusion scheme load. Material and method: FEA models were made by the 3D scanning of the edentulous mandibular dentiform. The three models were named as Model M1, M2, and M3 accord ing to the position of implants: M1, Lt. incisor area, M2, Canine area, and M3, 1st Premolar area. Inter-implant angulation model was named as M4. Conventional complete denture was named M5 and used as a control group. Ball implant and Gold matrice were used as a retentive anchors. The occlusion type loads were applied horizontally over each tooth. Results: 1. In mandibular implant retained overdenture Canine Protected Occlusion type load resulted in higher levels of stress to the implants and female matrices than other types of loads. 2. The overdenture model M1, with implants in lateral incisor areas resulted in lower stress concentration to the implants and female matrices than other models. 3. In mandibular implant retained overdenture the stresses of the implant and female matrice were lower in mesially inclined implant than these of parallel installed implant. Conclusion: Lateral incisor areas could be the best site for the implants in mandibular implant-retained overdenture. The mandibular implant retained overdenture models mentioned above showed to the lowest stress to the implants and female matrices.

• The korean journal of orthodontics
• /
• v.21 no.3
• /
• pp.673-683
• /
• 1991

This research was performed to find out the adaptation patterns of maxillary and mandibular posterior teeth to the changes in relationships of vertical skeletal components, which constitute the skeletofacial complex. For this research, 61 adult malocclusion patients were chosen as subjects according to the Hellman's dental age with normally ranged FMN-A-B angle. These subjects were divided into 4 groups in maxilla and 3 groups in mandible according to mesiodistal inclinations of teeth. Following results were obtained after studying the relationships of the vertical skeletal components between each group. 1. Inspire of the fact that the FMN-A-B angle was within a normal range, the degree of mesiodistal inclinations of maxillary and mandibular posterior teeth showed differences in relation to the anteroposterior relationships of maxilla and mandible. In case where the FMN-A-B angle was large, the mesial inclinations of maxillary posterior teeth showed more increase from the posterior to the anterior, whereas in mandible it showed overall decrease. 2. The degrees of mesial inclinations of mandibular posterior teeth were increased when the angulations of lower facial height, occlusal plane angle and mandibular plane angle were greater. 3. The patterns of mesial inclinations of maxillary posterior teeth were varied according to the angulation of lower facial height. If relatively large, it showed more increase from the posterior to the anterior and it was decreased nearly consistent when the angulation was small. 4. The degrees of mesial inclinations of maxillary posterior teeth were decreased as the lower facial height, palatal plane angle, occlusal plane angle and the mandibular plane angle became greater.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.40 no.6
• /
• pp.297-300
• /
• 2014

Objectives: To compare the clinical and radiological outcomes after closed reduction (CR) and open reduction and internal fixation (ORIF) in the management of subcondylar fractures. Materials and Methods: Forty-eight patients presenting with subcondylar fracture between January 2010 and March 2013 were evaluated retrospectively. Fifteen patients were treated with CR and 33 patients with ORIF. The clinical and radiologic parameters were evaluated during follow-up (mean, 7.06 months; range, 3 to 36 months). Results: In the CR group, no patients had any problems with regard to the clinical parameters. The average period of maxillomandibular fixation (MMF) was 5.47 days. The preoperative average tangential angulation of the fractured fragment was $3.67^{\circ}$, and loss of ramus height was 2.44 mm. In the ORIF group, no clinical problems were observed, and the average period of MMF was 6.33 days. The preoperative average tangential angulation of the subcondylar fragment was $8.66^{\circ}$, and loss of ramus height was 3.61 mm. Conclusion: CR provided satisfactory clinical results, though ORIF provided more accurate reduction of the fractured fragment. So there is no distinct displacement of fractured fragment, CR should be selected than ORIF because of no need for surgery.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.4
• /
• pp.321-329
• /
• 2002

Bending moments results from offset overloading of dental implant, which may cause stress concentrations to exceed the physiological capacity of cortical bone and lead to various kinds of mechanical failures. The purpose of this study was to compare the distributing pattern of stress on the finite element models with the different angulated placement of dental implant in mandibular posterior missing areas. The three kinds of finite element model, were designed according to 3 main configurations: Model 1(parallel typed placement of 2 fixtures), Model 2(15. distal angulated placement of one fixture on second molar area), Model 3(15. mesial angulated placement of one fixture on second molar area). The cemented crowns for mandibular first and second molars were made on the two fixtures (4mm 11.5). Three-dimensional finite element models by two fixtures were constructed with the components of the implant and surrounding bone. A 200N vertical static load were applied to the center of central fossa and the point 2mm apart from the center of central fossa on each model. The preprocessing, solving and postprocessing procedures were done by using FEM analysis software NISA/DISPLAY IV Version 10.0((Engineering Mechanics Research Corporation, USA). Von Mises stresses were evaluated and compared in the supporting bone, fixtures, and abutment. The results were as following : (1) Under the point loading at the central fossa, the direction of angulated fixture affected the stress pattern of implants. (2) Under the offset loading, the position of loading affected more on the stress concentration of implants compare to the angulated direction of implants. The results had a tendency to increase the stress on the supporting bone, fixture and screw under the offset loads when the placement angulation of implant fixture is placed toward mesial or distal direction. In designing of the occlusal scheme for angulated placement, placing the occlusal contacts axially during chewing appears to have advantages in a biomechanical viewpoint.

• The Journal of Korean Academy of Prosthodontics
• /
• v.18 no.1
• /
• pp.37-47
• /
• 1980

The purpose of this study was to investigate the stresses in different proximal margins and to measure, quantitatively, the effect of different modifications in the design of preparations on the stresses using two-dimensional photoelasticity. Photoelastic stress analysis is based on the phenomenon, exhibited by most transparent solids, of becoming birefringent, or doubly refracting, when strained. Two birefringent materials were used in this study, PSM-1 and PSM-5 in .standard sheet ($10'{\times}10'{\times}\frac{1}{4}'$ thickness), PSM-1(polyester) was used for constructing the substructure, and PSM-5(epoxy resin) was used in making the restorations to be investigated. Two birefringent materials were used in the construction of composite photoelastic model. Seven variable models were constructed. The peripheral dimensions of all model were constant and the models represent an occlusomesial section of a lower posterior molar. Model 1 represents the knife edge margin (shoulderless), Model 2 represents the chamfer, Model 3 represents a rounded shoulder(no sharp angle between the axial wall and gingival floor), Model 4 represents a flat shoulder (axial wall is a $90^{\circ}$ angle to the gingival wall), Model 5 represents $+15^{\circ}$ angulation, Model 6 has a $-15^{\circ}$ angulation, and Model 7 is the same as Model 4 except that it has a $45^{\circ}$ bevel. Improved artificial stone was used to represent dental cement in luting the composite photoelastic model. Static loading procedures(100 pounds) were used at preplanned sites. The results were as follows; 1. The stresses in the proximal portion of all tested models were compressive in nature when the proximal shoulders were loaded vertically on the same proximal marginal ridge. 2. The round and chamfered preparations were the optimum designs in proximoocclusal restorations. They showed the lowest stress concentration factor, i.e. 2.16 and 2.23, respectively. The knife edged shoulder had the highest value, K=5.39. Round type shoulder geometry experiments reduced the stress concentration factor (S.C.F.) 3. The gingival portion of proximal shoulder geometry was a critical location for stress concentration.

• Clinics in Shoulder and Elbow
• /
• v.21 no.1
• /
• pp.42-47
• /
• 2018

A 25-year-old woman presented to the emergency room with a painful and swollen right forearm. She had just sustained an injury from an accident during which her arm was tightly wound by a rope as she was lowering a net from a fishing boat. Before being released, her arm was rigidly trapped in the rope for approximately ten minutes. Radiographs revealed anterior dislocation of the radial head that was accompanied by plastic deformation of the proximal ulna, manifested as a reversal of the proximal dorsal angulation of the ulna (PUDA); suggested a Monteggia equivalent fracture. With the patient under general anesthesia, we reduced the radial head by posterior compression at $90^{\circ}$ of elbow flexion and at neutral rotation of the forearm. However, the reduction was easily lost and the elbow re-dislocated with even slight supination or extension of the arm. After the osteotomy of the ulnar deformity to restore the PUDA to normal, the reduction remained stable even with manipulation of the arm. We found that the patient could exercise a full range of motion without pain at the 3-month follow-up, and neither residual instability nor degenerative changes were observed at the final 3-year follow-up.