• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.467-470
• /
• 2002

The offects of a small control rod (d=3mm) located near a main circular cylinder on the drag reduction and wake structure modification were investigated. The location of the small control rod mounted on a rod-like spring is self-adjusting according to the wake structure far optimal control of the flow around the main cylinder. The experiments were carried out at the Reynolds numbers based on the cylinder diameter (D=50mm) in the range $Re_{D}=1{\times}10^4{\~}6{\times}10^4$. Mean velocity and turbulent statistics were measured with varying the angle along the cylinder circumference ${\Theta}=15^{\circ},\;30^{\circ},\;45^{\circ}$ and the distance between the main and control rods L =0.7, 1. Compared with the bare cylinder, the main circular cylinder with the fixed and self-adjusting rods reduced drag coefficient by $10{\%}$ at the angle of ${\Theta}=45^{\circ}$. For the main cylinder with self-adjusting rot as the Reynolds numbers increase, the streamwise mean velocity is increased, however, the turbulence intensity is decreased. In addition, the control rods tested in this study are effective at higher Reynolds number than at lower Reynolds number.

• Ocean Systems Engineering
• /
• v.12 no.3
• /
• pp.335-358
• /
• 2022

Hydrodynamic field alteration around a cylindrical pier using a curved vane is numerically investigated. The curved vane with various angles ranged from 10 to 220 degree is placed at the upstream of the cylindrical pier. Laminar flow is adopted in order to perform the steady-state analysis. It is found that the flow separation leads to the formation of four bubbles depending on the value of the curved vane angle. Two bubbles are located in the region between the rear of the curved vane and the leading surface of the cylindrical pier, while the remaining two bubbles are located at the wake zone behind the cylindrical pier. Numerical analysis is performed to reveal the hydrodynamic field and influence of curved vane on the formation and evolution of the bubbles. It is found that the center and size of the bubble depend mainly on the value of the curved vane angle. It is observed that the flow velocity vector shows clearly the alteration in the flow velocity direction especially at the leading surface and rear surface of the curved vane owing to the occurrence of flow separation and flow dissipation along the circumference of the vane.

• Journal of the Korean Home Economics Association
• /
• v.39 no.10
• /
• pp.97-109
• /
• 2001

It is thought that a composition of trousers is related to fabrics with single breadth. Therefore, trousers are designed with pattern using this fabrics with single breadth. However, in the old pattern of trousers, the breadth of 33cm-35cm was not considered in designing patterns. In this context, deciding which pattern design is better is not easy as there are a variety of estimation methods. So in this study, standardization of drafting is pursued by an objective pattern design. For this, a base angle of the trouser closely relating to a form and function was measured and using the height and the base angle, a trouser pattern design was tried. For a measurement of the base angle, 5 subject were selected. They are 25-29 year-old male graduates with fine physical standard. The base angle was measured with symphysis pubis point as a standard when subjects sat with their legs crossed, when they stood with their legs open (not forced artificially) and when they laid down with their legs open. The distance between a knee inside joint and knees was measured three times and the resultant value was used for the pattern design. For a design of trousers, the height was applied and the base angle was fixed. As a pattern drawing, using the height, a base angle and circumference of the hip, a trouser was designed. The production method for the pattern design is as follow: (1) The length formula, is height + $\frac{height}{2}$ (2) The hip girth formula is $\frac{hipgirth}{2}$ - $\frac{hipgirth}{20}$(3) A crotch angle is fixed at $72^{\circ}$. (4) The ratio of outer leg length to leg width is 5 : 8. (5) The component ratio of the upper outer leg length to the pant length is 5 : 8. (6) The ratio of the division point of front right inner leg length and left inner width to upper outer leg length is 5 : 8.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.12
• /
• pp.2233-2240
• /
• 2007

This paper presents the measured path loss exponents and standard deviations using measured data at 60GHz to analyze the propagation characteristics of millimeter wave bands having great demand for picocellular communications. In addition the angle of arrival(AOA) were measured to analyze the arrival direction of muitipath waves affecting the received signal strength. As results of analysis, the pathloss exponents in each environment are found to be lower than 2 for free space pathloss exponent. They were determined with the qualities of bottom materials affecting signal strength. The angles of arrival by multipath waves were different with the circumference structures between transmitter and receiver. That is, the multipath waves excluding direct and ground reflected wave were difficult to find in wide space such a gymnasium and playground, however the wall multipath waves were found to arrive at receiver in the corridor. The multipath waves at 60GHz can be known to hardly affect to the received signal strength because of weak signals compared with direct wave.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.2
• /
• pp.15-26
• /
• 2013

The purpose of this study is to offer basic data for designing and making of brassiere with the consideration of the physiological nature of man. Each of 3/4-cup wired upward-support-type Mold Bra of 75 size with basic pad made at three representative domestic companies (A, B and C Company) was selected for analysis of pattern and components. The following is the result of this study. 1. That Company A's bra had the highest cup, relatively narrow width, the widest front-center and the highest front center at front pad. That of Company B had relatively short wing over the base and much difference at the height of cup depending on the presence of wire. That of Company C had low and wide cup, the widest bust span and the front center width, the front center height of front pad, the base length of front pad and the length of wings were observed to be of the figures between those of Company A and B. 2. The Bra of Company A had the biggest front center angle of $6^{\circ}$, while that of Company C had the biggest wing angle of $18^{\circ}$. The Bra of Company B showed the biggest difference of patterns depending on the presence of wire. Those of Company A and C showed very similar shape when wire was inserted. 3. The order of making brassiere is following: making of exterior mold cup${\rightarrow}$ sewing exterior cup and circumference of mold${\rightarrow}$ sewing base and wings${\rightarrow}$ sewing binding tape to base${\rightarrow}$ sewing cup and main pad${\rightarrow}$ sewing binding tape to upper sides and upper part of wings${\rightarrow}$ sewing wire-tape to interior base of cup${\rightarrow}$ inserting of wire inside wire-tape${\rightarrow}$ sewing hook & eye on the back of wings${\rightarrow}$ sewing shoulder string.

• Journal of Veterinary Clinics
• /
• v.31 no.6
• /
• pp.483-489
• /
• 2014

This study describes a surgical technique and evaluates the clinical outcomes in small breed dogs with cranial cruciate ligament rupture (CCLR) treated with tibial plateau leveling osteotomy (TPLO). Seven skeletally mature dogs weighing less than 15 kg underwent unilateral TPLO to stabilize the stifle joint with CCLR. Clinical evaluation was performed via visual lameness score, range of motion (ROM), and thigh girth circumference (TC). Postoperative complications were recorded. All patients reached a grade 1 score at 1 week and grade 0 at 8 weeks postoperatively. The mean operated limb extension angle was 98.11%, 99.07%, and 98.73% of the mean extension angle of the contralateral limb at 4 weeks, 8 weeks, and 12 weeks postoperatively, respectively. The mean operated limb flexion angle was 98.07%, 95.88%, and 96.35% of the mean flexion angle of the contralateral limb at 4 weeks, 8 weeks, and 12 weeks postoperatively, respectively. The mean TC of the operated limb was 92.95%, 93.68%, and 95.44% of the mean TC of the normal limb at 4 weeks, 8 weeks, and 12 weeks postoperatively, respectively. Our outcomes for TPLO in small breed dogs are not worse than those previously reported for large breed dogs. Based on the result in the present study, CCLR in small dogs can be successfully managed with TPLO, as done in large breed dogs.

• The Research Journal of the Costume Culture
• /
• v.26 no.3
• /
• pp.360-376
• /
• 2018

The purpose of this study was to make a pants pattern suitable for women 70 to 85 years of age, then analyze that- pattern's shape, size, appearance, fit, allowance and air gap. Participants made the pattern using 3D simulation program DC Suite version 5.1. The results suggest a design method suitable for the lower-body shapes of elderly women. In external appearance, the A-type earned the highest evaluation in all items except the allowance of the back waist and back hip. The L type earned the highest evaluation in the allowance of back waist and hips. The A-type's, back waist appeared set at an angle that did not match the body shape of an old-old aged woman in the center-back-line setting. Therefore, the pattern method of A-type combined with L-type's method of center back, produces an excellent pants pattern. Evaluation of the air gaps among patterns revealed that; the A-type showed the largest air gap in waist and hip circumference and the smallest air gap in thigh circumference. The waists, abdomen, and hip circumferences of older women often become larger while their legs become slimmer. This study accounted for those factors in determining a pattern suitable for the lower-body shape of old-old aged women. However, participants only analyzed four patterns and compared them with women 70 to 85, years of age. Therefore, it is necessary to develop industrial patterns applicable to a wide age group.

• Journal of Korea Multimedia Society
• /
• v.20 no.2
• /
• pp.225-233
• /
• 2017

Line-laser beams are used for accurate measurement of 3D shape, which is robust to external illumination. For depth measurement, we project a line-laser beam across an object from the face and take an image of the beam on the object surface using a CCD camera at some angle with respect to the face. For shape measurement, we project parallel line-laser beams with narrow line to line distance. When a layer of thin materials attached to a cylinder is long narrow along its circumference, we can measure the shape of the layer with a small number of parallel line beams if we project line beams along the circumference of the cylinder. Measurement of the depth of the attached materials on a line-laser beam is based on the number of pixels between an imaginary line along the imaginary cylinder without the attached materials and the beam line along the materials attached to the cylinder. For this we need to localize the imaginary line in the captured image. In this paper, we model the shape of the line as an ellipse and localize the line with least square estimate. The proposed method results in smaller error (maximum 0.24mm) than a popular 3D depth camera (maximum 1mm).

• Journal of Advanced Navigation Technology
• /
• v.3 no.1
• /
• pp.20-31
• /
• 1999

In this paper, we have chosen KimPo International Airport as an area for estimating the flutter interference, in order to analyze the flutter interference. The field test at 25 points around KimPo International Airport and the simulation have been performed for estimating the flutter interference. We consider the received power of a direct wave, the height of an antenna, the ERP of a transmitting point, transmit frequency, and the reflection coefficients of an airplane, the transmit/receive point coordinates as estimation functions for the flutter. From the results, we have found that the flutter interference from flights is very serious around the route of flight circumference, and often occurs when the height of an airplane is low, range from 40 to 240 m. Besides, the degree of the flutter interference can be changed according to the distance between an airplane and a transmitting point, elevation angle, and the reflection coefficients of an airplane.

• Fashion & Textile Research Journal
• /
• v.16 no.6
• /
• pp.935-944
• /
• 2014

This study was about to investigate the characteristics of elementary school students' feet growth, comparing and analyzed the measured values and the index values of 3D scan data. As the results from analyzing the measured values, the all measurement items excluding 'Toe 5 angle' showed some significant differences among the age classes, knowing that the elementary school students' feet were continually grown. Although, the items of length, thickness, width, height and circumference indicate some rapid growth of feet at 11 years old, but it appears slowing growth of 'Foot width' after the age of 11 years old. The angle item didn't show any sequential differences according to ages. As the results from analyzing the index values, the children in higher grades have longer 'Toe 5', thicker ankles, wider and thicker the superior part of feet than the children in lower grades. For the superior and the middle part of feet were lowly raised, their Arch height was low and thick. The inferior part of feet showed narrow width and higher height. Giving that the Medial ball width was wide and the Toe 1 angle is high for the children in higher grades, it is expected that the Metatarsophalangeal I might be more projected than that of children in lower grades. Likewise, knowing that the male students' feet shape was bigger than female students' feet from the result that the male students' index values were higher.