• The Journal of Engineering Geology
• /
• v.10 no.1
• /
• pp.1-12
• /
• 2000

Heaving of road and subsidence of slope took place at the Wiri region of the local highway 999 in Gyeongsangbukdo, Korea after heavy rain in the next year of construction. Although the state government had performed remedial treatments by reducing the angle and the height of the slope, deformation had never stopped. Therefore, we have preformed the analysis of deformation and stabilityof the slope. Study area consists of the Cretaceous shale, siltstone and sandstone and two faults are found. The major deformation occurred by sliding of rock mass along faults after heavy rain because not only thepore pressure at the fault plane and the unit weight of sliding mass increased, but did the shearstrength of saturated fault clay become very low. The decrease in shear strength of saturated fault clayis the major factor among the reasons for deformation. Numerical simulations using limit equilibriummodel, finite difference model and finite element model were performed for eight cross sections.Although safety factors are above 1.7 during the dry season, they become below 1.0 when groundwaterlevel raises to surface. The maximum displacement is about 15-3Ocm. However, safety factors increasedto above 2.4 and the maximum displacement is below 2.08cm after remedial treatment, Indicating thatthe slope becomes stable.

• Research in Plant Disease
• /
• v.19 no.2
• /
• pp.84-89
• /
• 2013

The incidence factors of Rice stripe virus (RSV) were analyzed by studying the population density and the viruliferous insect rate (VIR) of small brown planthopper (SBPH), the incidence of stripe disease, alternate host, and susceptible cultivar in Chungnam Province. The population of overwintering SBPH had been decreasing, but the VIR of overwintering SBPH had not been differing for three years, 2008 to 2010. No RSV was detected in the natural host plants, such as short awn, annual bluegrass, and barley. In 2009, relatively large population of SBPH with the VIR of 5.4% migrated from China. However, there was no evidence relating of migration large amount of SBPH from China in 2008 and 2010. Also the infection rate of RSV in rice was less than 1% in these periods. The cultivation area of the susceptible varieties had steadily decreased from 41% to 19% from 2007 to 2009. Therefore, the reduction factors of rice stripe disease in Chungnam Province with higher influx of inoculum could be with an appropriate forecasting and chemical control, cultivation of resistant varieties, changes in the cropping system, and the low winter-spring temperature.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.6
• /
• pp.73-77
• /
• 2009

Two different aquifers with different characteristics developed in the study area - a lower and upper aquifer zone. Nitrate contamination of the lower aquifer zone was likely due to infiltration of nitrate-contaminated groundwater of the upper aquier zone through abandoned groundwater wells. In order to evaluate the feasibility of a preliminary packer designed to prevent nitrate migration through abandoned groundwater wells NO3-N concentrations of the upper and lower part of preliminary packer installed at four sampling sites were measured. Nitrate concentrations of the and lower part of Yechun sinwolri were 10.3 mg/L and 5.0 mg/L, respectively. Yechun eosinri, Yechun jeowooriis, and Andong hoegokri were $NO_3$-N concentrations in the upper (11.3, 11.0, and 14.6 mg/L) and lower (8.8, 1.6, and 8.0 mg/L), respectively. $NO_3$-N contents of all groundwater samples in the lower part after the preliminary packer installation showed 22~85% lower than those of the upper part.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.4 s.50
• /
• pp.325-336
• /
• 2006

Domestic serpentinite is one of the important industrial minerals utilizing in the iron manufacturing company such as POSCO in Korea. Serpentinite is distributed in the Ulsan Fe deposit, Andong, Hongseong-Cheongyang, and Gapyeong areas. This study tries to interpret the relationship among the formation of carbonate rocks, iron mineralization, and serpentinite alteration throughout the study of field occurrence, mineralogy, and chemical compositions. Serpentine is formed by the break-down of olivine and pyroxene of parent peridotite. The serpentinization is inferred to be formed by the hydrothermal fluid derived from intruded Cretaceous granite and the addition of meteoric water. Variation of major oxides such as $SiO_2,\;Fe_2O_3$, and MgO in serpentinized rocks are controlled by the degree of serpentinization and Fe mineralization. Variation of $Al_2O_3$ and CaO contents of altered rocks is dependent on the amount of the residual minerals such as calcite and homblende, and on the degree of chloritization. The presence of carbonate rocks reported in the sedimentary origin or igneous origin (carbonatite) provided a geological environment to form skarn type Fe deposit regardless of its origin. The geological processes of Ulsan Fe deposits are inferred to be formed as the order of the formation of carbonate rocks ${\to}$ the intrusion of Cretaceous granite ${\to}$ serpentinization ${\to}$ Fe mineralization by the interprelation of field occurrence and mineralogical characteristics.

• The Journal of Engineering Geology
• /
• v.24 no.4
• /
• pp.487-499
• /
• 2014

While the vertical open type of heat exchanger is more effective in areas of abundant groundwater, and is becoming more widely used, the heat exchanger most commonly used in geothermal heating and cooling systems in Korea is the vertical closed loop type. In this study, we performed numerical simulations of the optimal utilization of geothermal energy based on the hydrogeological and thermal properties to evaluate the efficiency of the vertical open type in areas of abundant groundwater supply. The first simulation indicated that the vertical open type using groundwater directly is more efficient than the vertical closed loop type in areas of abundant groundwater. Furthermore, a doublet system with separated injection and extraction wells was more efficient because the temperature difference (${\Delta}$) between the injection and extraction water generated by heat exchange with the ground is large. In the second simulation, we performed additional numerical simulations of the optimal utilization of geothermal energy that incorporated heat transfer, distance, flow rate, and groundwater hydraulic gradient targeting a single well, SCW (standing column well), and doublet. We present a flow diagram that can be used to select the optimal type of heat exchanger based on these simulation results. The results of this study indicate that it is necessary to examine the adequacy of the geothermal energy utilization system based on the hydrogeological and thermal properties of the area concerned, and also on a review of the COP (coefficient of performance) of the geothermal heating and cooling system.

• Journal of the Mineralogical Society of Korea
• /
• v.24 no.2
• /
• pp.91-99
• /
• 2011

The turbidity in several wells of Samdong-myeon, Ulsan, exceeded potable groundwater standard (1 NTU). Mineralogical analysis showed that the fine suspended particles are ferrihydrite spheres with a size of less than $0.5\;{\mu}m$ and helical iron-oxidizing bacterial filaments, and their aggregates. Ferrihydrite was almost amorphous only showing two electron diffraction rings, and contained Si and P. Helical bacterial filaments were almost replaced by ferrihydrite. The helical bacteria have played an important role in the ferrihydrite formation by becoming the loci for ferrihydrite precipitation as well as oxidizing ferrous iron. The physicochemical conditions of low pH, low redox potential, high Ca concentration, and high alkalinity are consistent with the hydrogeochemical characteristics of carbonate groundwater, implicating that the inflow of deep ferriferous carbonate groundwater and its oxidation have caused the ferrihydrite turbidity in several wells of the study area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5369-5377
• /
• 2014

Korean pagodas were constructed in the shape of a wood pagoda, brick pagoda, stone pagoda, etc. On the other hand, the currently remaining traditional pagodas are those having nonflammable materials, such as brick, stone, etc. Compared to the stone pagoda, there is data regarding brick pagodas, but there is little literature data on how to construct these pagodas. This appears to be because there are relatively few Korean brick pagodas currently remaining, they are locally restricted, the material limit is not overcome, pagoda's historical and regional problems have not been analyzed, and pagoda construction is centered on pagoda construction. Therefore, this study examined the local cultural characteristics on the construction of brick pagodas. As a result, cultural exchange between Korea and China was performed through the silk road and there was a marine route for cultural exchange. Such exchange was shared with the East Asia area as well, which can be found by comparing remains at related areas. Exchange with China can be mentioned as the selective exchange of local powers as well as blind learning. Second, brick pagoda were constructed in Korea because of the good quality soil easily. Uisang's Hwaeomjong was negotiated with the main power not agreeing with Buddhism, which was popularized and the local power. Third, brick pagoda construction was influenced by negotiation related between Balhae and Silla, in which the ethnic influence was locally affected and could be mentioned as being a culturally selective result transferred from China. As a result, brick pagodas can be oriented by forming a unitary state rather than a small country within China's influence range as well as cultural transfer through the silk road.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.1
• /
• pp.1-7
• /
• 2011

In this paper, we propose the digital image enhancement method including local tone reproduction and preservation of the hue. In recent studies, an integrated multi-scale retinex (IMSR) has produced great naturalness in the resulting images through enhancement of visibility in dark area in input images. However, most methods, including IMSR, work in RGB color spaces. As such, this produces hue distortion from the perspective of the human visual system, that is, hue distortion in CIELAB color space. Accordingly, this paper proposes an tone reproduction and enhancement of saturation method in a device-independent color space, CIELAB, to preserve the hue and obtain a high contrast and naturalness. First, to achieve the desired objectives, the IMSR is then applied to only the $L^*$ values in CIELAB color space, normalization, and simple mapping function, thereby preserving the balance of the color components and enhancement of visibility. Then, saturation adjustment is performed by applying the ratio of the chroma variation at the sRGB gamut boundary according to the corrected luminance. In experiments, the proposed method is shown to improve the visibility in dark shadows and bright regions in the resulting images and reduce any color distortion then preference test are performed.

• Journal of Korean Society of Forest Science
• /
• v.85 no.1
• /
• pp.15-23
• /
• 1996

Preparing the era of forest resources management requires studies on forest fire. This study attempted to develop forest fire occurrence model using meteorological characteristics for the practical purposes of forecasting forest fire danger rate. To accomplish this goal, the relationships between forest fire occurrence and meteorological characteristics are estimated. In the process, the forest fire occurrence pattern of the study region(Taegu-Kyungpook) is categorized by employing qualification IV method. The study region was divided into three areas such as, Taegu, Andong and Pohang area. The meteorological variables emerged as affective to forest fire occurrence are relative humidity, longitude of sunshine, and duration of precipitation. To estimate the probability of forest fire danger, forest fire occurrence of three areas are regressed on the time series data of affective meteorological variables using logistic and probit model. The effectiveness of the models estimated are tested and showed acceptable degree of goodness. Those models developed would be helpful to increase the efficiency of forest fire management such as detection of forest fire occurrence and effective disposition of forest fire fight equipments.

• Korean journal of applied entomology
• /
• v.44 no.4 s.141
• /
• pp.307-315
• /
• 2005

In this study we tried to develop a biological method for evaluating environment using the potter wasps as an indicator. Wasp species in family Eumenidae, were collected from 13 locations including agricultural area using nest trap. The wasps collected were classified and selected candidate species as an environmental evaluation indicator. Seven species were collected and the Anterhynchium flavomarginatum was the most dominant species. The number of the nest of potter wasps was 12.8/m both in the non-fertilizer and the non-pesticide areas and 7.2/m in the general agricultural areas. The number of nests was 13.4/m in the location where the Degree of Green Naturality (DGN) was high (4.28) and it was 1.2/m where the DGN was low (1.00), suggesting that the index of both richness and diversity tend to increase in locations with more nests. Based on these results, A. flavomarginatum, Orancistrocerus drewseni (Saussure), Isodontia nigellus and Chalicodoma sculpturalis were selected as indicator species for the evaluation of environment including agricultural ecosystem. And a standard for grading an environment (I to IV) was made based on the occurrence, the total number of nesting and the species diversity of potter wasps.