• Journal of the Korean Solar Energy Society
• /
• v.23 no.4
• /
• pp.63-70
• /
• 2003

It is very important to improve the insulation performance of curtain wall anchoring unit since it is composed of materials with high thermal conductivity, such as aluminium, steel and so on. This study aims to evaluate the heating energy performance and economical efficiency of various alternatives which are different in position and material of insulation. As results, alternative of inserting the urethane washer & pad and coating the anchoring unit with urethane foam can improve the heating energy performance and L.C.C(Life Cycle Cost) by 6.33% and 0.95%, respectively, as compared with the existing case.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.226-229
• /
• 2006

Strengthening with externally post-tensioned CFRP strips is more effective in increasing load carrying capacity of existing structures as well as reducing crack width and deflection. This study developed concrete embedded anchorages system for externally post-tensioned CFRP strips, and carried out experimental study to verify anchoring performance quantitatively. Through experimental results, anchoring strength of concrete embedded anchorage were quantified into shear strength of anchor bolt, bearing strength of concrete at the front of anchor plate and bond strength between anchor plate and concrete surface. In addition, overall anchoring performances according to combination of each unit force are examined in this study.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.72-82
• /
• 2022

The anchorage among harbour facilities should ensure sufficient water surface area for safe anchoring. A general method is to consider the L.O.A of the target ship and the depth and bottom quality of anchorage to calculate the water surface area of anchorage. However, the gross tonnage is used as a unit of the ship capacity standard of anchorage based on the detailed rules for harbour facilities operation in Korea. In this study, the gross tonnage is converted to L.O.A to calculate the actual anchoring radius of the target ship. This actual anchoring radius exceeds at 25 anchorages (among 90 anchorages) compared with the designated water surface area. Therefore, as an improvement plan of the ship capacity standard for anchorage, L.O.A should be used as a unit for anchorage based on the detailed rules for harbour facilities operation and related Korean maritime laws.

• Journal of Digital Convergence
• /
• v.14 no.6
• /
• pp.237-244
• /
• 2016

The purpose of this study examines the influence of anchoring and adjustment according to regularity of snack's shape. Especially this study choose 'choco chip' as a snack with regularity to compare with 2012's study. The results of this study are as follows. 1) The anchoring and adjustment also appears in 'choco chip' with regularity. But statistical meaning is different from the result of prior study. 2) The difference of anchoring effect reduced according to additional verbal information in 'choco chip' with regularity. but has no statistical meaning of interaction effect. However the causes of two results are different. 3) The interaction effect of cognitive load(without vs. moderate vs. high) is meaningful statistically. difference of anchoring effect reduced according to additional verbal information in 'choco chip' with regularity in 'choco chip' with regularity. This study provides strategic implication that it overcomes the limitation of the prior resuarch and may reinforce the biased judgement by cognitive overload.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.88.1-88.1
• /
• 2010

Organic dyes, because of their many advantages, such as high molar extinction coefficients, convenience of customized molecular design for desired photophysical and photochemical properties, inexpensiveness with no transition metals contained, and environment-friendliness, are suitable as photosensitizers for the Dye-sensitized Solar Cell (DSSC). The efficiency of DSSC based on metal-free organic dyes is known to be much lower than that of Ru dyes generally, but a high solar energy-to-electricity conversion efficiency of up to 8% in full sunlight has been achieved by Ito et al. using an indoline dye. This result suggests that smartly designed and synthesized metal-free organic dyes are also highly competitive candidates for photosensitizers of DSSCs with their advantages mentioned above. Recently, the performance of DSSC based on metal-free organic dyes has been remarkably improved by several groups. We had reported the novel organic dye with double electron acceptor chromophore, which was a new strategy to design an efficient photosensitizer for DSSC. To verify the strategy, we synthesized organic dyes whose geometries, electronic structures and optical properties were derived from preceding density functional theory (DFT) and time-dependent density functional theory (TD-DFT) calculations. In this paper, we successfully synthesized the chromophore containing multi-acceptor push-pull system from triphenylamine with thiophene moieties as a bridge unit. Organic dyes with a single electron acceptor and double acceptor system were also synthesized for comparison purposes. The photovoltaic performances of these dyes were compared, and the recombination dark current curves and the incident photon-to-current (IPCE) efficiencies were also measured in order to characterize the effects of the multi-anchoring groups on the open-circuit voltage and the short-circuit current. In order to match specifications required for practical applications to be implemented outdoors, light soaking and thermal stability tests of these DSSCs, performed under $100mWcm^{-2}$ and $60^{\circ}C$ for 1000h.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.7
• /
• pp.2093-2098
• /
• 2013

Density functional theory (DFT) was used to determine the ground state geometries of indigo and new design dyes (IM-Dye-1 IM-Dye-2 and IM-Dye-3). The time dependant density functional theory (TDDFT) was used to calculate the excitation energies. All the calculations were performed in both gas and solvent phase. The LUMO energies of all the dyes were above the conduction band of $TiO_2$, while the HOMOs were below the redox couple (except IM-Dye-3). The HOMO-LUMO energy gaps of new design dyes were smaller as compared to indigo. All new design dyes were strongly red shifted as compared to indigo. The improved light harvesting efficiency (LHE) and free energy change of electron injection ${\Delta}G^{inject}$ of new designed sensitizers revealed that these materials would be excellent sensitizers. The broken coplanarity between the benzene near anchoring group having LUMO and the last benzene attached to TPA unit in all new design dyes consequently would hamper the recombination reaction. This theoretical designing will the pave way for experimentalists to synthesize the efficient sensitizers for solar cells.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.3
• /
• pp.192-197
• /
• 2016

A novel heteroleptic ruthenium(II) complex bearing a 4-picolinic acid unit as anchoring ligands (trans-dithiocyanato bis(4-picolinic acid)ruthenium(II) (trans-H1)) was synthesized and its chemical structure was identified by $^1H$-NMR, FT-IR and mass spectroscopy. The optical, thermal, electrochemical and dye adsorption properties of trans-H1 dye were investigated and compared with those of the gold standard ruthenium complex, Ru(4,4'-dicarboxy-2,2'-bipyridine)$_2cis(NCS)_2$ (N3). DSSCs based on trans-H1 dyes were examined under the illumination of AM 1.5 G, $100mWcm^{-2}$ and exhibited typical photovoltaic properties with an open-circuit voltage ($V_{OC}$) of 0.46 V, a short-circuit current ($J_{SC}$) of $4.10mA{\cdot}cm^{-2}$, a fill factor (FF) of 60.4%, and a conversion efficiency (PCE) of 1.14%.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.766-768
• /
• 2004

Rubbed films of a series of poly(p-phenylene 3,6-bis(4-(n-alkyloxy)phenyloxy)pyromellitimide)s (Cn-PMDA-PDA PIs), which are well-defined brush PIs composed of two aromatic-aliphatic bristles per repeat unit of a fully rodlike backbone, were investigated in detail using atomic force microscopy (AFM), optical retardation analysis and linearly polarized infrared (IR) spectroscopy in order to elucidate their surface morphology and molecular orientation. The liquid crystal (LC) alignment behavior and the anchoring energy of LC molecules on the rubbed films were also determined.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.1
• /
• pp.35-48
• /
• 1995

To develop the optimal design method for the longline type scallop culturing facilities in the open sea numerical calculations and hydraulic model experiments are carried out for the stability and function optimization. Using the results for the motion and tension of the facilities, stable design concepts and effects of motion control system by vertical anchor and resistance discs art discussed. The results of this study that can be applied to the design are as follows: 1) Total external forces by design wave $(H_{1/3}\;=\;6,7\;m,\;T_{1/3}\;=\;12sec)$ at the coastal waters of Jumunjin for unit facility (one main line) are estimated to 5-20 tons, and required anchor weights are 10-40 tons in the case of 2-point mooring system. Though the present facilities are stable to steady currents, but is unstable to the extreme wave condition of return period of 10 years. 2) The dimensions and depth of array systems must be designed considering the ecological environments as well as the physical characteristics including the mooring and holding forces that are proportional to the length and relative depth of main line to wave length, and the number of buoys and nets. 3) Oscillation of the facility is influenced by water particle motion and the weight of hanging net, and is excited at both edge, especially at the lee side. To reduce the motion of the nets, the vertical anchoring system and the resistence disc method are recommended by the experimental results, 4) The damage of rope near the anchor by abrasion should be prevented using the ring-type connection parts or anchor chains.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.6
• /
• pp.663-670
• /
• 2014

The Pyeongtaek port is expected lack of waiting anchorage due to increase of incoming ships whit increasing of trading volume in the near future. In case of an anchorage facility's structural alternations and expansion, it should be considered comprehensively how it affects other anchorage facilities. In addition, the volume of ship traffic to relevant area should be estimated accurately and then the facility's scale is calculated. In this paper, researchers calculated cargo per unit ship with the throughput for every ship and predicted the number of ships which had entered Pyeongtaek port. As a result, the port's ability to be docked was predicted to be not enough in 2030. It will exceed the number of ships able to cast anchor at specific two parts simultaneously 12.6 and 1.6 respectively consequently, the necessity to expand the ports was suggested. Hence, the best expansion plan was examined with analysis of marine transportation environment at each ports and the improvements suggested are anchoring ships at Ippado anchorage is 19.7 and the one at Janganseo anchorage is 12.6.