• 한국태양에너지학회 논문집
• /
• 제23권4호
• /
• pp.63-70
• /
• 2003

It is very important to improve the insulation performance of curtain wall anchoring unit since it is composed of materials with high thermal conductivity, such as aluminium, steel and so on. This study aims to evaluate the heating energy performance and economical efficiency of various alternatives which are different in position and material of insulation. As results, alternative of inserting the urethane washer & pad and coating the anchoring unit with urethane foam can improve the heating energy performance and L.C.C(Life Cycle Cost) by 6.33% and 0.95%, respectively, as compared with the existing case.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.226-229
• /
• 2006

Strengthening with externally post-tensioned CFRP strips is more effective in increasing load carrying capacity of existing structures as well as reducing crack width and deflection. This study developed concrete embedded anchorages system for externally post-tensioned CFRP strips, and carried out experimental study to verify anchoring performance quantitatively. Through experimental results, anchoring strength of concrete embedded anchorage were quantified into shear strength of anchor bolt, bearing strength of concrete at the front of anchor plate and bond strength between anchor plate and concrete surface. In addition, overall anchoring performances according to combination of each unit force are examined in this study.

• 해양환경안전학회지
• /
• 제28권1호
• /
• pp.72-82
• /
• 2022

항만에 배치되는 수역시설 중 정박지는 대상 선박이 주묘되지 않고 안전하게 정박할 수 있도록 충분한 수면적을 확보하여야 한다. 이러한 수면적의 계산 시에는 대상 선박의 전장, 수심, 저질 등의 요소를 고려하는 것이 일반적이다. 그러나, 국내 각 항만의 항만시설운영세칙(혹은 규정)에는 정박지의 선박수용능력 기준으로 총톤수를 사용하고 있다. 본 연구에서는 총톤수 단위의 정박지 선박수용능력기준을 선박의 전장으로 변환하여 실제 대상 선박의 투묘 중 선회 반경을 계산한 결과, 분석 대상 90개의 정박지 중 25개의 정박지(27.8%)에서 선회 반경이 지정된 수면적을 초과하는 것으로 나타났다. 이러한 분석 결과를 바탕으로, 국내 각 항만의 항만시설운영세칙(혹은 규정) 상 정박지 선박수용능력 기준을 전장으로 개정하고, 관련 해사 법령의 해당 조항 개정을 개선방안으로 제시하였다.

• 디지털융복합연구
• /
• 제14권6호
• /
• pp.237-244
• /
• 2016

본 연구는 스낵모양의 규칙성에 따른 기준점설정 및 조정효과를 살펴보고자 하였다. 특히 본 연구는 2012 년 이전 연구와의 비교를 위하여 동일한 실험설계 하에서 규칙성 있는 자극물로 '촉촉한 초코칩'을 선정하였다. 연구 결과는 다음과 같다. 1) 규칙적인 자극물에서도 기준점 설정 및 조정효과가 나타났다. 그러나 이전 실험의 결과는 제품 단위 수에 따른 수량예측치의 차이가 통계적으로 유의한 반면, 본 연구에서는 통계적 유의확률이 더 높게 나타나 제품이 규칙성이 수량의 예측용이성을 높여 휴리스틱으로 인한 편향된 판단이 상당히 감소하고 있음을 알 수 있었다. 2) 규칙적인 자극물에서도 언어적 정보의 추가제공으로 기준점 설정효과는 차이가 줄어들었으나 그 상호작용효과는 통계적으로 유의하지 않았다. 그러나 그 원인은 다르게 나타났다. 이는 규칙성에 따른 기준점설정의 효과, 첫번째 연구문제에 대한 검증결과를 강화시켜주는 것으로 해석해 볼 수 있다. 3) 규칙적인 자극물에서도 인지부하정도의 상호작용효과는 통계적으로 유의하였다. 그러나 이 결과도 이전실험의 결과와는 전혀 다른 의미(인지과부하에 의한 편향된 판단의 확대)를 제공한다. 본 연구는 이전의 한계점을 극복한다는 측면에서 그리고 지나친 인지과부하는 편향된 판단을 오히려 강화할 수 있다는 점에서 마케팅 전략적 시사점을 제공하고 있다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.88.1-88.1
• /
• 2010

Organic dyes, because of their many advantages, such as high molar extinction coefficients, convenience of customized molecular design for desired photophysical and photochemical properties, inexpensiveness with no transition metals contained, and environment-friendliness, are suitable as photosensitizers for the Dye-sensitized Solar Cell (DSSC). The efficiency of DSSC based on metal-free organic dyes is known to be much lower than that of Ru dyes generally, but a high solar energy-to-electricity conversion efficiency of up to 8% in full sunlight has been achieved by Ito et al. using an indoline dye. This result suggests that smartly designed and synthesized metal-free organic dyes are also highly competitive candidates for photosensitizers of DSSCs with their advantages mentioned above. Recently, the performance of DSSC based on metal-free organic dyes has been remarkably improved by several groups. We had reported the novel organic dye with double electron acceptor chromophore, which was a new strategy to design an efficient photosensitizer for DSSC. To verify the strategy, we synthesized organic dyes whose geometries, electronic structures and optical properties were derived from preceding density functional theory (DFT) and time-dependent density functional theory (TD-DFT) calculations. In this paper, we successfully synthesized the chromophore containing multi-acceptor push-pull system from triphenylamine with thiophene moieties as a bridge unit. Organic dyes with a single electron acceptor and double acceptor system were also synthesized for comparison purposes. The photovoltaic performances of these dyes were compared, and the recombination dark current curves and the incident photon-to-current (IPCE) efficiencies were also measured in order to characterize the effects of the multi-anchoring groups on the open-circuit voltage and the short-circuit current. In order to match specifications required for practical applications to be implemented outdoors, light soaking and thermal stability tests of these DSSCs, performed under $100mWcm^{-2}$ and $60^{\circ}C$ for 1000h.

• Bulletin of the Korean Chemical Society
• /
• 제34권7호
• /
• pp.2093-2098
• /
• 2013

Density functional theory (DFT) was used to determine the ground state geometries of indigo and new design dyes (IM-Dye-1 IM-Dye-2 and IM-Dye-3). The time dependant density functional theory (TDDFT) was used to calculate the excitation energies. All the calculations were performed in both gas and solvent phase. The LUMO energies of all the dyes were above the conduction band of $TiO_2$, while the HOMOs were below the redox couple (except IM-Dye-3). The HOMO-LUMO energy gaps of new design dyes were smaller as compared to indigo. All new design dyes were strongly red shifted as compared to indigo. The improved light harvesting efficiency (LHE) and free energy change of electron injection ${\Delta}G^{inject}$ of new designed sensitizers revealed that these materials would be excellent sensitizers. The broken coplanarity between the benzene near anchoring group having LUMO and the last benzene attached to TPA unit in all new design dyes consequently would hamper the recombination reaction. This theoretical designing will the pave way for experimentalists to synthesize the efficient sensitizers for solar cells.

• 한국전기전자재료학회논문지
• /
• 제29권3호
• /
• pp.192-197
• /
• 2016

A novel heteroleptic ruthenium(II) complex bearing a 4-picolinic acid unit as anchoring ligands (trans-dithiocyanato bis(4-picolinic acid)ruthenium(II) (trans-H1)) was synthesized and its chemical structure was identified by $^1H$-NMR, FT-IR and mass spectroscopy. The optical, thermal, electrochemical and dye adsorption properties of trans-H1 dye were investigated and compared with those of the gold standard ruthenium complex, Ru(4,4'-dicarboxy-2,2'-bipyridine)$_2cis(NCS)_2$ (N3). DSSCs based on trans-H1 dyes were examined under the illumination of AM 1.5 G, $100mWcm^{-2}$ and exhibited typical photovoltaic properties with an open-circuit voltage ($V_{OC}$) of 0.46 V, a short-circuit current ($J_{SC}$) of $4.10mA{\cdot}cm^{-2}$, a fill factor (FF) of 60.4%, and a conversion efficiency (PCE) of 1.14%.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.766-768
• /
• 2004

Rubbed films of a series of poly(p-phenylene 3,6-bis(4-(n-alkyloxy)phenyloxy)pyromellitimide)s (Cn-PMDA-PDA PIs), which are well-defined brush PIs composed of two aromatic-aliphatic bristles per repeat unit of a fully rodlike backbone, were investigated in detail using atomic force microscopy (AFM), optical retardation analysis and linearly polarized infrared (IR) spectroscopy in order to elucidate their surface morphology and molecular orientation. The liquid crystal (LC) alignment behavior and the anchoring energy of LC molecules on the rubbed films were also determined.

• 한국수산과학회지
• /
• 제28권1호
• /
• pp.35-48
• /
• 1995

To develop the optimal design method for the longline type scallop culturing facilities in the open sea numerical calculations and hydraulic model experiments are carried out for the stability and function optimization. Using the results for the motion and tension of the facilities, stable design concepts and effects of motion control system by vertical anchor and resistance discs art discussed. The results of this study that can be applied to the design are as follows: 1) Total external forces by design wave $(H_{1/3}\;=\;6,7\;m,\;T_{1/3}\;=\;12sec)$ at the coastal waters of Jumunjin for unit facility (one main line) are estimated to 5-20 tons, and required anchor weights are 10-40 tons in the case of 2-point mooring system. Though the present facilities are stable to steady currents, but is unstable to the extreme wave condition of return period of 10 years. 2) The dimensions and depth of array systems must be designed considering the ecological environments as well as the physical characteristics including the mooring and holding forces that are proportional to the length and relative depth of main line to wave length, and the number of buoys and nets. 3) Oscillation of the facility is influenced by water particle motion and the weight of hanging net, and is excited at both edge, especially at the lee side. To reduce the motion of the nets, the vertical anchoring system and the resistence disc method are recommended by the experimental results, 4) The damage of rope near the anchor by abrasion should be prevented using the ring-type connection parts or anchor chains.

• 해양환경안전학회지
• /
• 제20권6호
• /
• pp.663-670
• /
• 2014

평택항은 항만 물동량의 증가로 선박 입항척수가 꾸준히 증가하여 향후 대기 정박지의 부족이 예상되고 있다. 정박지와 같은 하나의 수역시설을 변경 및 확장 등 개선하고자 할 경우에는 부근 해역의 타 수역시설에 미치는 영향을 종합적으로 고려하여야 한다. 또한 해당 해역에 대한 향후 선박교통량을 정확하게 예측하여 변경하고자 하는 수역시설의 규모를 산정하여야 한다. 본 연구에서는 증가될 항만 물동량을 단위선박 당 처리량으로 계산하여 장래 평택항 선박 입항척수를 예측하였다. 예측한 결과 정박지의 정박 능력을 2030년에 초과하는 것으로 나타났다. 이는 현 각 정박지 동시 투묘가능척수인 12.6척과 1.6척을 상회하는 규모로 현 정박지의 확장 필요성이 제기되었다. 이에 각 정박지별 해상교통환경 분석으로 최적의 확장 방안을 검토하여, 입파도 정박지의 경우 정박예상 척수를 19.7척 그리고 장안서 정박지의 경우 정박예상 척수를 12.6척을 수용할 수 있는 규모의 개선안을 제시하였다.