• Computers and Concrete
• /
• 제24권5호
• /
• pp.423-436
• /
• 2019

Design equations to evaluate the bursting force in a post-tensioned anchorage zone have been introduced in many design codes, and one equation in AASHTO LRFD is widely used. However, this equation may not determine the bursting force exactly because it was designed on the basis of two-dimensional numerical analyses without considering various design parameters such as the duct hole and shape of the bearing plate. To improve the design equation, modification of the AASHTO LRFD design equation was considered. The behavior of the anchorage zone was investigated using three-dimensional linear elastic finite element analysis with design parameters such as bearing plate size and diameter of sheath hole. Upon the suggestion of a modified design equation for evaluating the bursting force in an anchorage block with a rectangular anchorage plate (Kim and Kwak 2018), additional influences of design parameters that could affect the evaluation of bursting force were investigated. An improved equation was introduced for determining the bursting force in an anchorage block with a circular anchorage plate, using the same procedure introduced in the design equation for an anchorage block with a rectangular anchorage plate. The validity of the introduced design equation was confirmed by comparison with AASHTO LRFD.

• 한국방재학회 논문집
• /
• 제1권2호
• /
• pp.103-114
• /
• 2001

PSC box girder의 정착부 설계방법들을 비교해본 결과, 기존 시방서에 따른 설계방법에서는 다수의 정착구에 긴장력이 작용할 때 긴장력의 작용순서와 그 크기에 따른 응력의 중첩효과를 고려할 수 없는 단점을 가지고 있었고, 3차원 유한요소해석을 이용한 설계에서는 응력집중부와 응력흐름을 정확히 파악할 수는 있지만 부재의 단면력을 산정하기가 매우 번거롭고 까다롭다는 단점을 가진다. 그러나 strut-tie 모델을 이용한 설계법에서는 긴장력의 긴장순서에 따른 응력중첩효과를 고려할 수 있고 부재의 단면력의 산정 또한 매우 간편하여 긴장력의 도입순서에 의해 변화하는 응력의 흐름을 잘 파악하여 strut-tie로 구성된 트러스 부재들의 기하학적 조건을 만족하도록 유의한다면 정착부의 설계에 가장 적합한 설계방법이라 할 수 있다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.425-430
• /
• 2002

This thesis is a study on behavior for anchorage zone in prestressed double T beam using strut-tie model. Stress conditions of Anchorage zone in prestressed double T beam are very disturbed because large concentrated forces act on relatively small areas. Hence, anchorage zone must be considered in Design of prestressed double T beam. If irrational design or irrational construction be conducted, that may lose stability in capacity as structure. In current design practice, certain parts of structure are designed with extreme accuracy, while anchorage zone in prestressed double T beam is designed using common sense, and experience. Therefore, it is generally very conservative. For that reason, logical, reasonable concept and accuracies are desired at design of anchorage zone in prestressed double T beam. Strut-tie method satisfies those desires. In this thesis, anchorage zone in prestressed double T beam is analyzed by considering prestressing forces. Strut-tie model is constructed based on principle stress trajectory obtained from 3D-finite element analysis in anchorage zone, and amounts of reinforcement be obtained. Results of analysis are compared with the way used in current design practice, and this thesis presents that strut-tie model can be an economical design than current design methods without losing the degree of safety.

• 해양환경안전학회지
• /
• 제23권3호
• /
• pp.279-286
• /
• 2017

This study suggests design criteria to evaluate the availability of anchorage in Korea to contribute to ship safety by presenting necessary design criteria for anchorage volume according to port development. Accordingly, the concept of "necessary volume of anchorage" is introduced to evaluate the volume of anchorage available in Korea's major ports, and classify these ports into three types according to the characteristics of incoming ship. Numerical simulations designed using MATLAB-SIMULINK have been carried out to track the irregularly of arrival and, waiting times along with the environmental conditions that affect anchorage and necessary volume of anchorage have been suggested based on these tests. Finally, in order to complete a function equation analysis, the necessary volume of anchorage with reference to cargo volume is addressed using regression analysis as follows. Group $A-Y_{NA}=0.0002X_{HA}-3.67$, Group $B-Y_{NB}=0.0002X_{HB}-6.82$, Group $C-Y_{NC}=0.0001X_{HC}+9.02$. This study contributes to a review of anchorage volume from the perspective of harbor development.

• Computers and Concrete
• /
• 제11권6호
• /
• pp.493-513
• /
• 2013

Direct displacement-based design (DDBD) represents an innovative philosophy for seismic design of structures. When structural considerations are more critical, DDBD design should be carried on the basis of limiting material strains since structural damage is always strain related. In this case, the outcome of DDBD is strongly influenced by the displacement demand of the structural element for the target limit strains. Experimental studies have shown that anchorage slip may contribute significantly to the total displacement capacity of R/C column elements. However, in the previous studies, anchorage slip effect is either ignored or lumped into flexural deformations by applying the equivalent strain penetration length. In the light of the above, an attempt is made in this paper to include explicitly anchorage slip effect in DDBD of R/C column elements. For this purpose, a new computer program named RCCOLA-DBD is developed for the DDBD of single R/C elements for limiting material strains. By applying this program, more than 300 parametric designs are conducted to investigate the influence of anchorage slip effect as well as of numerous other parameters on the seismic design of R/C members according to this methodology.

• Geomechanics and Engineering
• /
• 제31권6호
• /
• pp.573-582
• /
• 2022

The geometry of the gravity-type anchorage changes depends on various factors such as the installation location, ground type, and relationship with the upper structure. In particular, the anchorage geometry embedded in the ground is an important design factor because it affects the pull-out resistance of the anchorage. This study examined the effect of four parameters, related to anchorage geometry and embedded ground conditions, on the pull-out resistance in the gravity-type anchorage through two-dimensional finite element analysis, and presented a guide for major design variables. The four parameters include the 1) flight length of the stepped anchorage (m), 2) flight height of the stepped anchorage (n), 3) the anchorage heel height (b), and 4) the thickness of the soil (e). It was found that as the values of m increased and the values of n decreased, the pull-out resistance of the gravity-type anchorage increased. This trend is related to the size of the contact surface between the anchorage and the rock, and it was confirmed that the value of n, which has the largest change rate of the contact surface between the anchorage and the rock, has the greatest effect on the pull-out resistance of the anchorage. Additionally, the most effective design was achieved when the ratio of the step to the bottom of the anchorage (m) was greater than 0.7, and m was found to be an important factor in the pull-out resistance behavior of the anchorage.

• 해양환경안전학회지
• /
• 제25권3호
• /
• pp.251-258
• /
• 2019

This study was conducted to propose an effective port operation method in terms of the design capacity of waiting anchorage by comparing the ratio and the number of waiting anchorage according to the port operation method of Busan New Port. For this, the Arena simulation program compared the rates of waiting vessels according to the application of the multi-user terminal, liner terminal and hybrid liner terminal operation methods. As a result, analysis suggested the necessary anchorage space can be reduced to about 18 % when using the multi-user terminal operation method and about 15.6 % when using the hybrid liner terminal operation method, as compared with the liner terminal operation method. Specifically, it was effective to apply the multi-user terminal operation method in terms of the anchorage capacity to be designated to Busan New Port. This study can apply to the designation of the new anchorage in the Busan New Port by reflecting the contents of the design of the anchorage in accordance with the port operation method.

• 해양환경안전학회지
• /
• 제22권2호
• /
• pp.167-173
• /
• 2016

본 연구에서는 정박지 해상교통 환경을 재현한 시뮬레이션을 통하여 정박지의 적정 면적을 결정하기 위한 방법론을 제시하고, 이를 울산항 E정박지에 적용하여 울산항 정박지 면적의 적정성을 비교 분석하기 위한 목적이 있다. 이를 위해 정박지 사용현황에 따른 시간별 정박지 점유율과 필요 정박지 면적 계산식을 제시하였다. 시간별 정박지 점유율 분석을 위해 시뮬레이션 알고리즘을 구성하고, MATLAB 프로그램을 이용하여 모델링하였으며, 이를 울산항 E 정박지에 적용하여 시간별 정박지 점유율과 필요 정박지 면적을 도출하고 현재 울산항 E정박지 면적과 비교 분석하였다. 그 결과 E1 정박지의 필요 정박지 면적은 현재 정박지 면적의 1.41배, E2와 E3 정박지는 0.90배, 0.96배로 분석되었다. 본 연구에서 제시한 정박지 면적의 적정성 분석 결과를 정박지 설계기준에 반영할 경우 정박지를 이용하는 선박의 안전에 도움을 줄 수 있을 것으로 판단된다.

• 해양환경안전학회지
• /
• 제25권5호
• /
• pp.519-526
• /
• 2019

본 연구는 대기정박지의 신설 및 조정이 필요한 항만을 위해 정박지의 적정 용량을 산정하기 위한 방법론을 제시하고, 이를 진해만 내 항만과 부산에 적용하여 국내 주요 항만의 정박지 용량과 비교 분석하여 적용에 무리가 없는지 검토하기 위한 목적이 있다. 이를 위해 항만을 이용하는 선박의 총톤수 용량과 동시 정박 가능 용량의 개념을 정의하고 정박지 용량지수를 계산하여 대상항만을 위한 적정 정박지 용량을 산정하는데 이용하였다. 그 결과 진해만 내 항만의 정박지 용량지수는 0.89로 산출되었으며, 대기정박지 신설을 위한 적정 정박지 용량지수는 6.0 수준으로 분석되었다. 본 연구에서 제시한 정박지 용량지수의 개념을 정박지 설계 기준으로 반영할 경우 정박지를 이용하는 선박의 안전, 정박지 안전성 및 항만의 효율적인 운영에 도움을 줄 수 있을 것으로 판단된다.

• 콘크리트학회지
• /
• 제8권3호
• /
• pp.209-218
• /
• 1996

프리캐스트 프리스트레스트 콘크리트 구조물의 정착부에 프리스트레스트 힘이 도입되면, 과다한 국부 집중 하중으로 인하여 균열이 발생할 수 있으며, 최근 이러한 구조물 건설시 텐던을 따라가며 심각한 균열이 발생한 경우가 있다. 본 논문은 프리캐스트 프리스트레스트 콘크리트 구조물의 정착부에 발생하는 국부집중응력의 분포 특성을 규명하고, 정착부 보강 형태에 따른 국부응력 효과를 규명하여 합리적인 정착부 설계 개념을 제시함에 목적이 있다. 이를 위하여 정착부 형태에 따른 역학적 거동 실험 및 해석연구가 수행되었다. 위의 연구 결과 나선형 보강철근이 극한 및 균열하중에 대한 저항능력이 가장 우수함이 집중응력 분포 특성을 고찰함으로서 나타났으며, 정착부의 파괴기구, 정착부 보강설계를 위한 기본 개념 및 그 방법이 제시되었다.