• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1999년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.119-126
• /
• 1999

The objective of this task is to develop seismic design and capacity detailing recommendations for all portions of bridge piers that do not participate as primary energy dissipation elements. particular emphasis is given to the design requirements of cap beams and their connections of multi-column bridge pier bents. By prestressing the joints it is possible to ensure the joints remain elastic. Prestress enhances the bond and anchorage of the longitudinal column bars and also minimizes or avoids diagonal shear cracking in the joints.

• 한국터널지하공간학회 논문집
• /
• 제16권6호
• /
• pp.521-531
• /
• 2014

이 논문은 케이블 인발하중이 작용하는 현수교의 지중정착식 앵커리지 캐번 터널에 대한 거동과 관련된 연구이다. 수치해석 결과와 이중곡선 관계식에 의한 추정식에서 얻어진 극한인발저항력($P_u$) 결과와 비교를 통하여 앵커리지 거동, 앵커리지 설계 방법, 파괴면의 각도, ${\delta}$ 등을 분석하였다. 연구결과 $P/{\gamma}/H$와 변위와의 선형 상관관계, $P_u/{\gamma}/H$와 H/b와의 선형 상관관계를 활용하면 앵커리지 캐번 터널의 설치 심도를 쉽게 결정 할 수 있을 것으로 나타났다. 또한 수치해석에 의한 최대전단변형률 분포도와 소성영역 분포도를 분석한 결과 지반파괴 형태는 현재 사용되는 지반 콘 보델 보다는 원호모델에 더 가까운 것으로 나타났다. 이 연구에서는 계산이 간편하도록 원호모델을 단순화한 이중곡선 모델을 제안하였다. 수치해석 결과로부터 얻어진 평균 파괴각을 이중곡선 모델에 적용한 결과, 이중곡선 모델을 적용한 추정식에서 얻어진 극한인발저항력은 수치해석에서 얻어진 극한인발저항력 결과와 잘 일치하는 것으로 나타났다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권5호
• /
• pp.82-91
• /
• 2011

본 연구에서는 콘크리트 매입앵커시스템 설계코드인 ACI 349-01에 제시되지 않은 직경 50mm(2") 이상 유효매입깊이($h_{ef}$) 635mm(25") 이상의 대형 매입앵커시스템에서 전단 파열파괴 성능과 거동특성을 파악하기 위하여 24개의 실규모 시험을 하였다. 시험변수로는 앵커볼트의 직경($d_0$=63.5, 76.2, 88.9mm), 앵커볼트의 매입깊이($h_{ef}$=635, 762mm), 연단거리($c_1$=381, 508, 762mm) 그리고 콘크리트강도($f_{ck}$= 38MPa)로 하였다. 예측식인 $V_{aci06}$과 $V_{ccd}$는 시험결과($V_{test}$)를 과대평가하는 것으로 나타났다. 앵커볼트직경($d_0$) 50mm(2")이상, 유효매입깊이($h_{ef}$) 635mm(25")이상의 대형앵커시스템에서 앵커볼트직경 변화시험과 유효매입깊이 변화시험은 앵커시스템의 전단성능에 영향이 없는 것으로 나타났다. 그러나, 대형 앵커리지시스템의 연단거리와 앵커볼트의 직경에 대한 형상비에 의한 분석결과 형상비가 작아질수록(앵커볼트의 직경이 커질수록) 시험결과에 대한 예측식의 비가 커지는 것으로 분석되었다. 이는 앵커볼트의 직경이 전단강도 저하의 직접적인 원인인 것으로 밝혀졌다. 설계기준에 대한 적절한 개선을 위해서는 더 많은 이론적, 해석적 연구가 필요하다.

• International Journal of Concrete Structures and Materials
• /
• 제5권2호
• /
• pp.77-85
• /
• 2011

The use of headed bars as opposed to standard 90- or 180-degree hooked bars in beam ends, beam-column joints or other steel congested areas for anchorage and bond has become more favorable due to the fact that steel congestion is often created by large bend diameters or crossties. This research mainly focuses on evaluating the code provisions regarding the use of headed bars. Nine simply supported rectangular concrete beams with headed longitudinal reinforcement were tested under a four-point monotonic loading system. The design clear spacing, which varies from 1.5 to 4.25 times the bar diameter, was the only parameter for the experimental investigation. The test results showed that the closely-spaced headed bars were capable of developing to full yield strength without any severe brittle concrete breakout cone or pullout failure. Bond along the bar was not sufficient due to the early loss of concrete integrity. However, the headed bars were effective for anchorage with no excessive moment capacity reduction. This implies that the clear spacing of about 2 times the bar diameter for headed bars may be reasonable to ensure the development of specified yield strength of headed bars and corresponding member design strength.

• Steel and Composite Structures
• /
• 제28권6호
• /
• pp.719-734
• /
• 2018

Prior to the introduction of modern seismic guidelines, it was a common practice to provide straight bar anchorage for beam bottom reinforcement of gravity load designed building. Exterior joints with straight bar anchorages for beam bottom reinforcements are susceptible to sudden anchorage failure under load reversals and hence require systematic seismic upgradation. Hence in the present study, an attempt is made to upgrade exterior beam-column sub-assemblage of a three storied gravity load designed (GLD) building with single steel haunch. Analytical formulations are presented for evaluating the haunch forces in single steel haunch retrofit. Influence of parameters that affect the efficacy and effectiveness of the single haunch retrofit are also discussed. The effectiveness of the single haunch retrofit for enhancing seismic performance of GLD beam-column specimen is evaluated through experimental investigation under reverse cyclic loading. The single steel haunch retrofit had succeeded in preventing the anchorage failure of beam bottom bars of GLD specimen, delaying the joint shear damage and partially directing the damage towards the beam. A remarkable improvement in the load carrying capacity of the upgraded GLD beam-column sub-assemblage is observed. Further, a tremendous improvement in the energy dissipation of about 2.63 times that of GLD specimen is observed in the case of upgraded GLD specimen. The study also underlines the efficacy of single steel haunch retrofit for seismic upgradation of deficient GLD structures.

• Steel and Composite Structures
• /
• 제22권1호
• /
• pp.25-43
• /
• 2016

This paper presents the results of an experimental study investigating the effects of anchorage systems used in externally bonded steel plates on the strength and ductility of reinforced concrete structures. In the literature, diagonal steel plates bonded to frames were designed to be more flexible than the connections to eliminate the possible effect of the connection flexibility. However, to better evaluate the performance of the strengthened structures, the strength and behavior of connections should also be considered. The purpose of this study was to experimentally investigate the effects of different connection types of steel plates bonded to the frame using anchors on the strengthened RC structures. For this purpose, eleven specimens were designed to simulate the interior and exterior connection behavior. Two of these were used as the control beams and remaining nine for the investigation of the functionality of the end steel plates. Experimental results show that the load carrying capacity of the strengthened beams is directly related to the connection types of the steel plates. For the interior connections, L-shaped end plates that were strengthened using steel anchors must have adequate stiffness to prevent its shape. While, for the exterior connections, the connection with three anchors carried more load than the other exterior connections.

• 대한공간정보학회지
• /
• 제18권3호
• /
• pp.21-27
• /
• 2010

기존의 구조물 지하공동의 용량측정은 일반적인 측량방법은 불규칙한 단면측정이 곤란하고, 사진측량방법은 시공중의 먼지나. 소음, 진동, 조명조건 등의 문제로 인하여 정확한 단면결정이 곤란하다. 레이저스케너시스템은 레이저 펄스를 주사하여 반사된 레이저 펄스의 도달시간을 측정함으로써 반사 타깃 없이 지형 지물 및 구조물의 3차원 좌표를 취득할 수 있는 것으로 3차원 모델링에 많이 이용되고 있다. 따라서, 본 연구는 교량 구조물 공사가 이루어지고 있는 지하 앵커리지 굴착 공사에 레이저스케너를 사용함으로서 정확한 단면 및 토공량을 결정하였다.

• Structural Engineering and Mechanics
• /
• 제64권1호
• /
• pp.135-143
• /
• 2017

To upgrade shear performance of reinforced concrete (RC) beams, and particularly of the segments under negative moment within continuous T-section beams, a series of original schemes has been proposed using carbon fibre-reinforced polymer (CFRP) U-shaped strips for shear-strengthening. The current work focuses on one of them, in which CFRP U-strips are wound around steel bars against the top of the flange of a T-beam and then spliced on its bottom face in addition to being bonded onto its sides. The test results showed that the proposed scheme successfully provided reliable anchorage for U-strips and prevented premature onset of shear failure due to FRP debonding. The governing shear mode of failure changed from peeling of CFRP to its fracture or crushing of concrete. The strengthened specimens displayed an average increase of about 60% in shear capacity over the unstrengthened control one. The specimen with a relatively high ratio and uniform distribution of CFRP reinforcement had a maximum increase of nearly 75% in strength as well as significantly improved ductility. The formulas by various codes or guidelines exhibited different accuracy in estimating FRP contribution to shear resistance of the segments that are subjected to negative moment and strengthened with well-anchored FRP U-strips within continuous T-beams. Further investigation is necessary to find a suitable approach to predicting load-carrying capacity of continuous beams shear strengthened in this way.

• International Journal of Concrete Structures and Materials
• /
• 제9권4호
• /
• pp.415-425
• /
• 2015

Reinforced concrete beams with insufficient shear reinforcement were strengthened using glass fiber reinforced polymer (GFRP) plates. In the study, the effect of the number of bolts on the load capacity, energy dissipation, and stiffness of reinforced concrete beams were investigated by using anchor bolt of different numbers. Three strengthened with GFRP specimens, one flexural reference specimen designed in accordance to Regulation on Buildings Constructed in Disaster Areas rules, and one shear reinforcement insufficient reference specimen was tested. Anchorage was made on the surfaces of the beams in strengthened specimens using 2, 3 and 4 bolts respectively. All beams were tested under monotonic loads. Results obtained from the tests of strengthened concrete beams were compared with the result of good flexural reference specimen. The beam in which 4 bolts were used in adhering GFRP plates on beam surfaces carried approximately equal loads with the beam named as a flexural reference. The amount of energy dissipated by strengthened DE5 specimen was 96 % of the amount of energy dissipated by DE1 reference specimen. Strengthened DE5 specimen initial stiffness equal to DE1 reference specimen initial stiffness, but strengthened DE5 specimen yield stiffness about 4 % lower than DE1 reference specimen yield stiffness. Also, DE5 specimen exhibited ductile behavior and was fractured due to bending fracture. Upon the increase of the number of anchorages used in a strengthening collapsing manner of test specimens changed and load capacity and ductility thereof increased.

• Advances in concrete construction
• /
• 제10권2호
• /
• pp.93-104
• /
• 2020

Basalt fiber is an eco-friendly fiber and comparatively newer to the world of fiber-reinforced polymer (FRP) composites. A limited number of studies have been reported in the literature on the strengthening of reinforced concrete (RC) beams with basalt fiber reinforced polymer (BFRP). The present experimental work explores the feasibility of using the BFRP strips for shear strengthening of the RC beams. The strengthening schemes include full wrap and U-wrap. A simple mechanical anchorage scheme has been introduced to prevent the debonding of U-wrap as well as to utilize the full capacity of the BFRP composite. The effect of varying shear span-to-effective depth (a/d) ratio on the behavior of shear deficient RC beams strengthened with BFRP strips under different schemes is examined. The RC beams were tested under a four-point loading system. The study finds that the beams strengthened with and without BFRP strips fails in shear for a/d ratio 2.5 and the enhancement of the shear capacity of strengthened beams ranges from 5% to 20%. However, the strengthened beams fail in flexure, and the control beam fails in shear for a higher a/d ratio, i.e., 3.5. The experimental results of the present study have been compared with the analytical study and found that the latter gives conservative results.