• Journal of KSNVE
• /
• v.7 no.6
• /
• pp.993-1000
• /
• 1997

This paper presents a new technique of mathematical treatment using a finite element model for analyzing the vibration of the towed line array. Since the towed line array has the axisymmetricity, axisymmetric elements are used in finite element modeling for the towed array structure. The fluid-structure interaction is also considered. The array consists of a series of identical substructures which can include internal structures such as spacers, hydrophones and ropes. That periodicity of substrucutres permits the substructure synthesis technique using characteristic wave guide for analyzing the response of towed array system. This synthesis technique can reduce the cost of computing the array response. It is suggested that a response of towed array can be computed by the finite element method and substructure synthesis technique using wave guide. Several experiments for towed array were performed to verify the present computation technique. The predicted vibration for the towed array shows good agreement with the measured result.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.1
• /
• pp.11-17
• /
• 2020

This study conducted a case study and a questionnaire analysis in parallel. In the case study, a study was conducted on domestic manufacturer A by analyzing pallet loading efficiency of RRP(Retail Ready Packaging) products and pallet loading efficiency of MWC(Membership Wholesale Club) delivered products. As a result of the pallet loading efficiency simulation of 50 RRP products of Manufacturer A, it was 80.0% based on the T-11 type pallet and 84.3% based on the T-12 type pallet. It was found It refers that the route of producing the product from the manufacturer A and delivering it to the MWC A in the form of RRP resulted in the decrease of the pallet loading efficiency through the change of the loading pattern and the adjustment of the number of loads. As a result of analyzing the questionnaire about whether the overall efficiency of the supply chain will be improved if the operation of the packaging system considering the SCM(Supply Chain Management) aspect is χ² = 178.500, there was a statistically significant difference at the significance level of 0.000. Manufacturers and logistics companies answered "yes" the most, but distributors answered "is average" the most, confirming that the packaging can be constructed with the highest operational efficiency. Therefore, as a result of confirming the impact of packaging design considering the SCM aspect on logistics efficiency, it indicates the importance of closer collaboration between manufacturers and distributors.

• The Korean Journal of Applied Statistics
• /
• v.19 no.3
• /
• pp.431-445
• /
• 2006

In this paper we review some methods for analyzing functional data and illustrate real application of functional data analysis. Representing methods for functional data by using basis function, analyzing functional variation by functional principal component analysis and functional linear models are reviewed. For a real application, we use temperature and precipitation data measured in Korea from the January of 1970 to the May of 2004. We apply functional principal component analysis for each data and test the significance of regional division done by using shining hours. We also estimate functional regression model for temperature and precipitation.

• Korean Journal of Veterinary Research
• /
• v.41 no.3
• /
• pp.343-350
• /
• 2001

The neutralization epitopes of the outer capsid protein VP4 of a porcine rotavirus, Gottfried strain, were studied using neutralizing monocolonal antibodies(N-MAbs). Eight N-MAbs which are specific for the VP4 of Gottfried strain were used for analyzing the antigenic sites of VP4. Three different approaches were used for this analysis; i)testing the serological reactivity of each N-MAb against different G and P types of human and animal rotavirusese ii) analyzing N-MAb-resistant viral escape mutants and iii) performing nucleotide sequence analysis of the VP4 gene of each N-MAb-resistant viral escape mutant. From experimental results, at least four antigenic sites(I, II, III, and IV) were identified. Antigenic site I recognized by N-MAbs 24B9, 23G10, and 26A2 was separated from antigenic site II recognized by N-MAbs 30H5, 32B3, and 29B3. However, these antigenic sites were overlapped with antigenic site III recognized by N-MAb 21A1. The other antigenic site IV recognized by N-MAb 16D2 was separated from antigenic sites I, II, and III.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.425-429
• /
• 2006

The understanding and prediction of the behavior of flow in open channels are important to the solution of a wide variety of practical flow problems in water resources engineering. Recently, frequent drought has increased the necessity of an effective water resources control and management of river flows for reserving instream flow. The objective of this study is to develop an efficient and accurate finite element model based on Streamline Upwind/Petrov-Galerkin(SU/PG) scheme for analyzing and predicting two dimensional flow features in complex natural rivers. Several tests were performed in developed all elements(4-Node, 6-Node, 8-Node elements) for the purpose of validation and verification of the developed model. The U-shaped channel of flow and natural river of flow were performed for tests. The results were compared with these of laboratory experiments and RMA-2 model. Such results showed that solutions of high order elements were better accurate and improved than those of linear elements. Also, the suggested model displayed reasonable velocity distribution compare to RMA-2 model in meandering domain for application of natural river flow. Accordingly, the developed finite element model is feasible and produces reliable results for simulation of two dimensional natural river flow. Also, One contribution of this study is to present that results can lead to significant gain in analyzing the accurate flow behavior associated with hydraulic structure such as weir and water intake station and flow of chute and pool.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.31 no.2
• /
• pp.92-103
• /
• 1989

This study was performed in order to produce the basic data for devising irrigation project and desalinization countermeasure through analyzing salt movement and desalinzation effects. The Desalinization experiments with water management practices were carried out, using the soil samples collected in New Manguem tideland. The changes of electrical conductivity, exchangeable sodium percentage, pH and hydraulic conductivity during the desalinization experiments, and the correlations between various factors influencing desalinization, were analyzed by the statistical method. The results obtained from this study were summarized as follows: 1. The sample soils used in this study were salin-sotlic soils with the high electrical conductivity and the high exchangeable sodium percentage, and the soil texture was silt loam. 2. A large amount of the soluble salts was removed in the begining of desalinization experiments. The initial electrical conductivity and the initial exchangeable sodium percentage decreased considerably in the beginning, and were gradually slow in the rate of decrease 3. The value of pH showed a tendency to increase during the desalinization and were little by little slow in the rate of increase, and could be estimated by the regression equation. 4. The initial hydraulic conductivity were raised greatly with gypsum treatment and the penmeability was maintained adequately, The hydraulic conductivity and the leaching time elapsed during the desalinization could be estimated by the regression equation. 5. The water requirement for desalinization with various water management practices could be estimated for a given electrical conductivity, exchangeable sodium percentage, and pH reading respectively.

• Journal of the Ergonomics Society of Korea
• /
• v.23 no.3
• /
• pp.25-38
• /
• 2004

Selection of a key dimension (s) by considering the characteristics of hand dimensions is needed to design gloves and construct a sound sizing system for gloves The present study identified key dimensions of glove design by analyzing the relationships between hand dimensions and demonstrated the construction process of a glove sizing system. By conducting correlation and regression analyses on 70 hand dimensions including 3 key dimension candidates (hand length; hand circumference; hand breadth) with the 1988 US Army data, hand length and hand circumference were selected as key dimensions for glove design. Glove sizing systems were constructed for males and females by applying the selected key dimensions, 0.5 inch of sizing intervals, and 2％ of presence rate criterion to the US Army data. This study suggests that glove sizing systems for males and females be very different from each other and a glove sizing system for males include more sizes than that for females.

• International Commerce and Information Review
• /
• v.12 no.1
• /
• pp.403-428
• /
• 2010

This research is about global investment for managing the important position, what Korea is doing in World's main market. Considering there are some differences between developed countries' model and developing countries' model in doing direct overseas investment, they target to get political agreement and develop the new invest plan and strategy by understanding changes of Korean manufacturing companies in direct overseas investment between 2001 and 2008 and analyzing the change of yearly investment motivation. The result from this result let us know that company should develop their own idea for their competitive advantage by doing direct overseas investment. And, the overseas investment, which was already done in other countries, 1. Review its realities and tendency in terms of investing countries, industries, and its scale and then Set up an actual model, based on strategic combination of investing location select and determination of Korean manufacturing companies. 2. Analyze how the situational factors have influenced and what factors would be considered for direct overseas investment. From the analyzing result, even though it is fairly true that raising wage and getting resources, and developing alternating industries for export had influenced at the beginning, overseas investing companies' policy will be influenced by the results from studying marketing-pursuit type, local producing and manufacturing by using low-wage people for local sale, and situation for changing investing tendency as service industry.

• Korean Institute of Interior Design Journal
• /
• v.20 no.1
• /
• pp.61-70
• /
• 2011

Based on the trend of architectural lighting of residential building, this study is to examine architectural lighting for residential buildings, and deduce the value and significance of architectural lighting by analyzing architectural lighting and characteristics of residential building through the analysis of works according to the types of works and by analyzing discourse relating to works of architectural lighting of residential building. First, architectural lighting for residential buildings can be categorized according to continuity and extensibility, lighting method and lighting factor. Second, architectural lighting of residential building has come into play since 2000 due to diversified activities at home. Third, architectural lighting had been introduced for living room and used in the form of structure or foundation up until early 2000s, but since mid 2000s, it has been used in intellectual and abstract form using various shapes, finishing material or objects. Fourth characteristic is a space of changing functions overcoming limited space, suggesting an alternative space, and using finishing material and object.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.576-579
• /
• 2004

Recently, using GPS and equipment that recognizes the position of the car such a computer system inside the car are very universalized. Specially, the technique that diagnoses troubles and prevents troubles through scanning engine ECU is very popularized also. However, because these data have to be directly transferred and received from the car, in cases of traffic accident such as serious damage or car theft, it is impossible to receive the data at the time of accident. In order to receive and preserve the data safely regardless of these situations, it is possible to provide data for analyzing reasons of accident and prevent accidents from occurring by using wireless communication to receive the transferred information of the car, then saving into a Database system DB, or grasping the situation of the car and the driving pattern of drivers through analyzing stored data. Moreover, due to developing some related services such as providing the information about the real time of the accident, diagnoses of the car and alarms, etc. It is expected to contribute to creating added values.