• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.961-963
• /
• 2003

Magnetization losses of HTS depend strongly on the orientation of external magnetic field because of anisotropy characteristics. For parallel and perpendicular magnetic field, analytical models to calculate the loss are well known but there is no analytical model for magetic fields which are applied to surface of HTS with arbitrary angle. In this paper, magnetization losses are measured for various incidence angles($15^{\circ}$, $35^{\circ}$, $45^{\circ}$, $60^{\circ}$) and compared with parallel and perpendicular loss. As a result, magnetization losses in HTS are strongly affected by perpenducular magnetic field component of external magnetic field.

• Journal of Power Electronics
• /
• v.17 no.4
• /
• pp.1097-1108
• /
• 2017

Accurate calculation of the conduction and switching losses of a power electronic converter is required to achieve the efficiency of the converter. Such calculation is also useful for computing the junction temperature of the switches. A few models have been developed in the articles for calculating the switching energy losses during switching transitions for the given values of switched voltage and switched current. In this study, these models are comprehensively reviewed and investigated for the first time for ease of comparison among them. These models are used for calculating the average amount of switching power losses. However, some points and details should be considered in utilizing these models when switched current or switched voltage presents time-variant and alternative quantity. Therefore, an applicable technique is proposed in details to use these models under the above-mentioned conditions. A proper switching loss model and the presented technique are used to establish a new and fast method for obtaining the average switching power losses in any type of power electronic converters. The accuracy of the proposed method is evaluated by comprehensive simulation studies and experimental results.

• Journal of Broadcast Engineering
• /
• v.19 no.2
• /
• pp.268-271
• /
• 2014

Conventional forward error correction (FEC) code rate decision schemes using analytical source coding distortion model and channel-induced distortion model are usually complex, and require the typical process of model parameter training which involves potentially high computational complexity and implementation cost. To avoid the complex modeling procedure, we propose a simple but accurate joint source-channel distortion model to estimate channel loss threshold set for optimal FEC code rate decision.

• Journal of Power Electronics
• /
• v.18 no.3
• /
• pp.778-788
• /
• 2018

Magnetic resonance wireless power transfer (WPT) in the marine environment can be utilized in many applications. However, energy loss in seawater through eddy loss (EL) is another consideration other than WPT in air. Therefore, the effect of system parameters on electric field intensity (EFI) needs to be measured and ELs calculated to optimize such a system. In this paper, the usually complicated analytical expression of EFI is simplified to the product of frequency, current, coil turns, and a coefficient to analyze the eddy current loss (ECL). Moreover, as the calculation of ECL through volume integral is time-consuming, the equivalent eddy loss impedance (EELI) is proposed to help designers determine the optimum parameters quickly. Then, a power distribution model in seawater is conceived based on the introduction of EELI. An optimization flow chart is also proposed according to this power distribution model, from which a prototype system is developed which can deliver 100 W at 90% efficiency with a gap of 30 mm and a frequency of 107.1 kHz.

• Structural Engineering and Mechanics
• /
• v.87 no.2
• /
• pp.173-189
• /
• 2023

For a given structural geometry, the stiffness and damping parameters of the soil and the dynamic response of the structure may change in the face of an equivalent linear soil behavior caused by a strong earthquake. Therefore, the influence of equivalent linear soil behavior on the impedance functions form and the seismic response of the soil-structure system has been investigated. Through the substructure method, the seismic response of the selected structure was obtained by an analytical formulation based on the dynamic equilibrium of the soil-structure system modeled by an analog model with three degrees of freedom. Also, the dynamic response of the soil-structure system for a nonlinear soil behavior and for the two types of impedance function forms was also analyzed by 2D finite element modeling using ABAQUS software. The numerical results were compared with those of the analytical solution. After the investigation, the effect of soil nonlinearity clearly showed the critical role of soil stiffness loss under strong shaking, which is more complex than the linear elastic soil behavior, where the energy dissipation depends on the seismic motion amplitude and its frequency, the impedance function types, the shear modulus reduction and the damping increase. Excellent agreement between finite element analysis and analytical results has been obtained due to the reasonable representation of the model.

• Computers and Concrete
• /
• v.6 no.6
• /
• pp.473-490
• /
• 2009

This paper presents a new methodology to evaluate the load carrying capacity of deteriorated non-slender concrete bridge pier columns by construction of the full P-M interaction diagrams. The proposed method incorporates the actual material properties of deteriorated columns, and accounts for amount of corrosion and exposed corroded bar length, concrete loss, loss of concrete confinement and strength due to stirrup deterioration, bond failure, and type of stresses in the corroded reinforcement. The developed structural model and the damaged material models are integrated in a spreadsheet for evaluating the load carrying capacity for different deterioration stages and/or corrosion amounts. Available experimental and analytical data for the effects of corrosion on short columns subject to axial loads combined with moments (eccentricity induced) are used to verify the accuracy of proposed model. It was observed that, for the limited available experimental data, the proposed model is conservative and is capable of predicting the load carrying capacity of deteriorated reinforced concrete columns with reasonable accuracy. The proposed analytical method will improve the understanding of effects of deterioration on structural members, and allow engineers to qualitatively assess load carrying capacity of deteriorated reinforced concrete bridge pier columns.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.79.2-79.2
• /
• 2013

The distributions of Horizontal Branch (HB) star color, temperature, and mass encode a great deal of information on the stellar evolutionary and (possibly) dynamical processes taking place in Globular Clusters (GCs). An accurate physical modeling of the Red Giant Branch (RGB) mass-loss process is key to solving the so-called second parameter problem. In my poster I will present the most recent advancements of an analytical model for mass-loss along the RGB. The model predicts the HB mass distribution with remarkable accuracy over a sample of 4 GCs. These results were submitted as a paper to ApJ (Pasquato et al. 2013, ApJ submitted), but here I expand on them presenting refinements to the model and a comparison with HB masses obtained from Galex ultraviolet observations.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.10
• /
• pp.87-93
• /
• 1999

To propose a useful modelling method for an actual muffler, the noise attenuation effects of muffler was investigated according to the flow condition and the hole shape of tubes. In this work, the finite element method was used to calculate the transmission loss of muffler, The noise attenuation characteristics of four different types of muffler in the hole shape of tubes were compared mutually to find a more simple equivalent model. Analytical results showed that the overall value of transmission loss increases and the peaks of transmission loss curve shift to the low frequency with mean flow for the given muffler, Also the noise attenuation characteristics of the equivalent model having the split holes is almost the same as those of the actual muffler having many circular holes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.9
• /
• pp.2154-2172
• /
• 2013

A centralized cognitive radio (CR) network is proposed and its system capacity is studied. The CR network is designed with power control and multi-user scheduling schemes to support best-effort traffics under peak interference power constraints. We provide an analytical framework to quantify its system capacity, taking into account various key factors such as interference constraints, density of primary users, cell radius, the number of CR users, and propagations effects. Furthermore, closed-form formulas are derived for its capacities when only path loss is considered in the channel model. Semi-analytical expressions for the capacities are also given when more realistic channel models that include path loss, shadowing, and small-scale fading are used. The accuracy of the proposed analytical framework is validated by Monte Carlo simulations. Illustrated with a practical example, the provided analytical framework is shown to be useful for the strategic planning of centralized CR networks.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.723-724
• /
• 2008

The rotational loss is one of the most important problems for the practical applications of PM synchronous motor/generator. This rotational loss is divided as the mechanical loss by windage and bearing and iron loss by hysteresis loop and eddy current in the part of the magnetic field. So, In this paper, a double-sided PMSM/G without the iron loss is designed by analytical method of the magnetic field and estimation of the back-EMF constant represented as the design parameter. This design model consists of the double-sided PM rotor with Halbach magnetized array and coreless 3-phase winding stator. The results show that the double-sided PMSM/G without iron loss can be applicable to the required system without the rotational loss.