• International Journal of Automotive Technology
• /
• 제6권5호
• /
• pp.491-499
• /
• 2005

There are different types of vehicle impacts recorded every year, resulting in many injuries and fatalities. The severity of these impacts depends on the aggressivety and incompatibility of vehicle-to-roadside hardware impacts. The aim of this paper is to investigate and to enhance crashworthiness in the case of full barrier impact using a new idea of crash improvement. Two different types of smart structures have been proposed to support the function of the existing vehicle. The work carried out in this paper includes developing and analyzing mathematical models of vehicle-to-barrier impact for the two types of smart structures. It is proven from analytical analysis that the mathematical models can be used in an effective way to give a quick insight of real life crashes. Moreover, it is shown that these models are valid and flexible, and can be useful in optimization studies.

• Bulletin of the Korean Chemical Society
• /
• 제10권6호
• /
• pp.524-529
• /
• 1989

A glow discharge mass spectrometric(GDMS) analytical method was developed for direct analysis of impurities in solids. Ions extracted from a glow discharge ion source with a sample as a cathode were analyzed by a quadrupole mass filter. Ion extractions were carried out through differentially-pumped orifices biased to positive and negative potentials. Operating parameters of the glow discharge source such as discharge current, orifice-to-cathode distance, energy analyzer setting and bias voltages have been optimized. The developed GDMS was applied to the analysis of KSS copper-base alloy standards certified by Korea Standards Research Institute(KSRI). In the analysis, the reproducibility and the detection limits were estimated to be about 2.5% RSD, and in the low ppm range, respectively.

• KCI Concrete Journal
• /
• 제11권3호
• /
• pp.5-17
• /
• 1999

In recent years. the concept of the modified compression field theory (MCFT) was develped and applied to the analysis of reinforced concrete beams subjected to shear, moment, and axial load. Although too complex for regular use in the shear design or beams. the procedure has value in its ability to provide a rational method of anlysis and design for reinforced concrete members. The objective of this paper is to review the MCFT and apply it for the prediction of the response and shear strength of reinforced concrete beams A Parametric analysis was Performed on a reinforced T-section concrete beam to evaluate and compare the effects of concrete strength. longitudinal reinforcement ratio shear reinforcement ratio, and shear span to depth ratio in two different approaches the MCFT and the ACI code. The analytical study showed that the concrete contribution to shear strength by the MCFT was higher than the one by the ACI code in beams without stirrups, while it was lower with stirrups. On the other hand. shear reinforcement contribution predicted by the MCFT was much higher than the one by the ACI code. This is because the inclination angle of shear crack is much smaller than 45$^{\circ}$assumed in the ACI code.

• 분석과학
• /
• 제14권4호
• /
• pp.311-316
• /
• 2001

본 연구는 한약재 중 우리 나라의 여러 지역에서 재배되고 있는 황기를 선택하여 유도결합 플라스마 분광분석법(inductively coupled plasma-atomic emission spectroscopy ; ICP-AES)을 이용한 미량성분을 분석하여 principal component analysis(PCA)와 pattern recognition의 원리를 이용한 chemometrics Analysis로 한약재에 함유된 미량 금속 성분 함량에 의한 원산지 판별의 가능성을 조사하였다. 황기와 토양시료는 각각 $HNO_3$와 $H_2O_2$ 그리고 $HNO_3$와 HCl를 첨가하여 microwave oven을 사용하여 전처리 하였다. ICP-AES를 사용하여 황기와 황기를 재배한 토양 속에 들어 있는 미량 금속 성분으로는 Mg, Al, K, Ca, Ti, Mn, Fe, Cu, Zn, and Ba 등이 있으며 그 중 Al과 Fe 그리고 Zn과 Ti의 함량으로는 PCA와 pattern recognition을 이용하여 각 재백지의 황기와 토양간의 연계성을 살펴보았다. 그 결과 국내산 황기와 중국산 황기를 PCA 방법으로 원산지 판별이 가능하였으며 구례, 예천, 제천, 그리고 정선의 국내산 황기의 원산지 판별이 가능하였다.

• 대한지리학회지
• /
• 제29권3호
• /
• pp.360-368
• /
• 1994

地理學에서는 地域의 特性을 규명하고자 수많은 計量的 分析手法을 사용하여 왔다. 본 고에서는 일종의 判別分析技法으로 최근에 도입된 CHAID技法을 사용하여 都市와 都市 機能에 관한 통계처리를 시도하였다. 2종류의 자료를 가지고 두 차례 처리를 실시하였는데, 하나는 인구 25만명 이상의 도시 20개를 예측변수로 하고, 行政, 市場, 金融機能 그리고 生 産機能을 반응변수로 하여 도시의 기능을 분류해 내었다. 두번째 처리에서는 앞서 언급한 행정, 시장, 금융, 생산기능 이외에 交通, 敎育, 의료, 文化, 그리고 運送機能의 9가지를 예측 변수로 선정하고, 수도권, 부산권, 대구권, 광주권, 충청권의 5개 권역을 반응변수로 하여 각 권역에서 탁월한 기능을 판별, 분류해 내었다. 이상에서 CHAID기법은 큰 양의 범주형 자료 를 처리할 수 있고, 樹形圖로 결과를 산출하여 해석이 용이하므로 地域을 分類하거나 특성 을 判別하는데 유용한 또 하나외 새로운 분석틀로 여겨진다.