• Knowledge Management Research
• /
• v.5 no.1
• /
• pp.69-82
• /
• 2004

Prior research on knowledge management focused more on the experiential knowledge based on individual's experience or knowhow than on the analytical knowledge extracted from corporate data. This study examines the effects of the data warehouse technology, especially OLAP(on line analytical processing) and data mining techniques, on the analytical knowledge creation in organizations, linking analytical knowledge creation to data analysis method through real world case studies.

• Knowledge Management Research
• /
• v.2 no.1
• /
• pp.25-44
• /
• 2001

There are two types of organizational knowledge in terms of its creation process: experiential and analytical knowledge. The experiential knowledge is created by repetitive experiences of an individual or team through task execution, while the analytical knowledge is acquired by analyzing accumulated data or information in the organization. The experiential knowledge often remains tacit or implicit in the organization because it is primarily acquired at an individual or team level. Therefore, the issue on the experiential knowledge is to share it actively within the organization. On the other hand, the analytical knowledge is explicit in its nature since it is extracted from data or information. Thus, it is important to guide a systematic creation of the analytical knowledge rather than encourage to share it. The current trend of "knowledge management" mainly focuses on the experiential knowledge - know-how, idea, case, etc - and neglects another important knowledge in the organization. i. e., analytical knowledge. This paper tries to shed a new light on the "knowledge management" arena by introducing rather new perspective in the concept of knowledge. The purpose of this study is to identify the factors affecting the analytical knowledge creation in the organization. We conducted an exploratory case study of three companies with a previously defined research framework and found some critical factors for the analytical knowledge creation. They are "organizational resource", "effectiveness of feedback process", "data source management", and "experimental mind set". Finally, we proposed research model and propositions regarding the analytical knowledge creation in the organization.

• Architectural research
• /
• v.19 no.3
• /
• pp.79-87
• /
• 2017

In earthquake engineering, dynamic analyses are usually conducted by using a nonlinear analytical model of the entire building in order to identify the performance against earthquakes. At the same time, a large number of dynamic analyses are required to consider uncertainties on analytical models and ground motions. Therefore, it is necessary for the analytical model to be adequate, that is to say, the runtime should not be too long as the entire building is modeled to be in much detail, or the nonlinear model should not yield outputs very far from the actual ones by excluding important behaviors too much. The analytical model is usually developed based on experimental results, which have been already conducted for reinforced concrete columns with relaxed details. Therefore, this study aimed at making analytical models to be able to simulate the hysteretic behavior of the columns simply and easily. The analytical model utilizes a lumped hinge model to represent nonlinear moment-rotation hysteretic behavior of RC columns, which is feasible for nonlinear dynamic analyses usually conducted in earthquake engineering and for matching the analytical model to test results. For the analytical model, elements and material models provided by OpenSees are utilized. The analytical model can define the envelope curve, pinching, and unloading stiffness deterioration, but shortcoming of this model is not to be able to consider axial force-moment interaction directly and to simulate strength deterioration after post-capping completely. However, the analytical model can still represent test results well by considering that the goal of this study is to propose a general way to represent the hysteretic behavior of RC columns with relaxed details, not to provide parameters for a refined hysteretic model that can be just applied case by case.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.176-181
• /
• 2011

A role of cost modeler is that of facilitating design process by the systematic application of cost factors so as to maintain sensible and economic relationships between cost, quantity, utility and appearance. These relationships help to achieve the client's requirements within an agreed budget. The purpose of this study is to develop a parametric cost estimating model for the early design stage by using the multi-dimensional system of OLAP (On-line Analytical Processing) based on the case of quantity data related to architectural design features. The parametric cost estimating models have been adopted to support decision making in the early design stage. These models typically use a similar instance or a pattern of historical case. In order to effectively use this type of data model, it is required to set data classification and prediction methods. One of the methods is to find the similar class in line with attribute selection measure in the multi-dimensional data model. Therefore, this research is to analyze the relevance attribute influenced by architectural design features with the subject of case-based quantity data used for the parametric cost estimating model. The relevance attributes can be analyzed by Analytical Characterization. It helps determine what attributes to be included in the OLAP multi-dimension.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1997.10a
• /
• pp.109-112
• /
• 1997

In this study, we attempt to improve analytical methods in auditing by applying Artificial Intelligence(AI) methods including Artificial Neural Networks(ANN) and Case-Based Reasoning(CBR), and to perform pattern recognition of the investigation signals generated by analytical procedures. Five years of audited financial data from a large-sized firm were used to calculate four commonly applied financial ratios. This exploratory study shows that the use of AI methods to analyze patterns of related fluctuations across numerous financial ratios provides improved performance in recognizing material misstatements within the financial accounts.

• Journal of the Korean Society of Safety
• /
• v.28 no.2
• /
• pp.55-59
• /
• 2013

The analytical model was constituted to evaluate the flexural strength of UHPFRC(ultra high performance fiber reinforced concrete) member. The analytical approach was attemped to study the effect of the joint and the result compared with the experimental study to verify the analytical model. The calculated value tends to underestimate about 23%~25% in comparison with the experimental result of the jointed test member because the bond stress between precast UHPFRC and cast-in-place UHPFRC surface is not considered in the analytical model. But in the case of the continuous test member, the analytical model provides reasonable results for the flexural strength of UHPFRC member.

• Geomechanics and Engineering
• /
• v.28 no.3
• /
• pp.225-237
• /
• 2022

Settlement evaluation is important for shallow tunnels in big cities to estimate the settlement that occurs due to the excavation of twin tunnels. The majority of earlier research on analytical solutions, on the other hand, concentrated on calculating the settlement for a single tunnel. This research introduces a procedure to evaluate the settlement induced by the excavation of twin tunnels (two parallel tunnels). In this study, a series of numerical analysis were performed to validate the analytical solution results. Two geological conditions were considered to derive the settlement depending on each case. The analytical and numerical methods were compared, which involved considering many sections and conducting a parametric study; the results have good agreement. Moreover, a comparison of the 3D flat model and 2D (FEM) with the analytical solution shows that in the fill soil, the maximum settlement values were obtained by the analytical solution. In contrast, the values obtained by the analytical solution in the rock is more conservative than those in the fill. Finally, this method was shown to be appropriate for twin tunnels dug side by side by utilizing finite element analysis 3D and 2D (PLAXIS 3D and PLAXIS 2D) to verify the analytical equations. Eventually, it will be possible to use this approach to predict settlement troughs over twin tunnels.

• Journal of Korean Association for Spatial Structures
• /
• v.19 no.3
• /
• pp.93-100
• /
• 2019

In this study, the retractable-roof spatial structure was chosen as the analytical model and a tuned mass damper (TMD) was installed in the analytical model in order to control the seismic response. The analysis model is mainly consisted of runway trusses (RT) and transverse trusses (TT), and the displacement response was analyzed by installing TMD on those trusses. The mass of the single TMD which is installed in the analytical model was set to 1% of the total structure mass and the total TMD mass ratio was set to be 8% or 6%. In addition, the mass of a single TMD was varied depending on the number of installations. As a result of analyzing the optimal number of installations of TMD, the displacement response was reduced in all cases compared to the case without TMD. Above all, the case with 8 TMDs was the most effective in reducing he displacement response. However, in this case, as the load on the upper structure of the retractable-roof spatial structure increases, the total mass ratio of TMD was maintained and the number of TMDs was increased to reduce the mass ratio of one TMD.

• 보존과학연구
• /
• s.25
• /
• pp.5-29
• /
• 2004

This research carried out ancient technique and composition of the relics recovered from the octagonal nine-storied pagoda of Woljeongsa temple using the scientific methods and obtained the following results. Firstly, The silver sarira inner case is consists of Ag, its materials comes out near 98wt%and comparing with the relics of Hwangnamdaechong, the contents of Ag and Ni are almost same with it. Secondly, The bronze sarira outer case, its contents of Cu is almost same with pure copper of which average is 99.7wt%. So, it should be named the copper sarira outer caserather than the bronze sarira outer case that has been called. Thirdly, The bronze mirror, though the contents of tin and lead are less than other contents which have been studied, they tend to have white color so they need to be made a close study. Especially, Because cultural property of nondestructive surface analytic method is not analyzed by the analysis of cross section and the moisten analysis, it may be occurred analytical errors by other factors.

• Journal of Drive and Control
• /
• v.16 no.2
• /
• pp.43-50
• /
• 2019

The objective of this study was to reverse engineer a swash plate type piston pump mounted on a wheeled armored vehicle and to analyze the structure of the pump case. From the analysis, the weak parts were identified and corrected in the final design. Each element corresponding to the piston pump case was analyzed. The analytical method was given static boundary conditions, load conditions and confirmed displacement, strain, stress, and safety factor. Plastic deformation and damage were also confirmed and the component elements redesigned through structural analysis Structural analysis and vibration analysis were carried out for the components of the piston pump case. The piston pump model was finally modified by structural analysis and vibration analysis results for each component assembly, and a prototype was designed. Durability test and environmental test were carried out and the test results satisfied all of the requirements. Therefore, the analytical method presented in this study can be utilized as a methodology for element component design in the development of various piston pumps.