• 한국신뢰성학회지:신뢰성응용연구
• /
• 제11권3호
• /
• pp.213-224
• /
• 2011

In this paper, we analyze statistically the data set of first leak time of water pipeline. We classify first the leak time data by pipe type, location, diameter of pipe and, length of pipe. We perform the analysis of variance to indicate that there are significant difference of mean of the time between levels of the factor and also compare the distribution of levels using the multiple box-plot. When there are the difference of the mean, we perform the least significant test to find out what levels of the facor has a different mean.

• 한국공작기계학회논문집
• /
• 제10권3호
• /
• pp.97-103
• /
• 2001

This paper has focused on the Optimization of the cutting parameters for urning operation based on the Taguchi method. Four cutting parameters. nemely, cutting speed, feed depth of cut and nose radius are optimized with consideration of the surface roughness. The design and analysis of experiments are conducted to study the performance characteristic. The effects of these parameters on the surface roughness have been investigated using signal-to-noise(S/N) ratio and analy-sis of variance(ANOVA). The experiments have been performed using coated tungsten carbide inserts without any cutting fluid. Experimental results illustrate the effectiveness of this approach.

• 한국공작기계학회논문집
• /
• 제13권4호
• /
• pp.1-8
• /
• 2004

Various controllable parameters of an experiment have influence on grinding process. In order to get good products with a high quality, these parameters should be considered whether each parameter has relations to the quality. This paper describes the use of the design of experiments to minimize geometric error in surface grinding. Controllable parameters for the design of experiments were selected as spindle speed, table speed, depth of cut and grain size. From the experimental results, a degree of influence between these parameters and the geometric error was evaluated. An optimal set of grinding conditions was obtained by means of analysis of variance(ANOVA).

• 치과방사선
• /
• 제28권2호
• /
• pp.339-353
• /
• 1998

The purpose of this study was to investigate whether a radiographic estimate of osseous fractal dimension and power spectrum of 2D discrete Fourier transform is useful in the characterization of structural changes in bone. Ten specimens of bone were decalcified in fresh 50 ml solutions of 0.1 N hydrochloric acid solution at cummulative timed periods of 0 and 90 minutes. and radiographed from 0 degree projection angle controlled by intraoral parelleling device. I performed one-dimensional variance. fractal analysis of bony profiles and 2D discrete Fourier transform. The results of this study indicate that variance and fractal dimension of scan line pixel intensities decreased significantly in decalcified groups but Fourier spectral analysis didn't discriminate well between control and decalcified specimens.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2022년도 춘계학술대회
• /
• pp.277-279
• /
• 2022

Rapid Development and adoption of AIS as a survailance tool has resulted in widespread application of data analysis technology, in addition to AIS ship trajectory clustering. AIS data-based clustering has become an increasingly popular method for marine traffic pattern recognition, ship route prediction and anomaly detection in recent year. In this paper we propose a route waypoint extraction by clustering ships CoG variance trajectory using Density-Based Spatial Clustering of Application with Noise (DBSCAN) algorithm in both port approach channel and coastal waters. The algorithm discovers route waypoint effectively. The result of the study could be used in traffic route extraction, and more-so develop a maritime anomaly detection tool.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.242-248
• /
• 2000

This paper has focused on the optimization of the cutting parameters for turning operation based on the Taguchi method. Four cutting parameters, namely, cutting speed, feed, depth of cut and nose radius are optimized with consideration of the surface roughness. The design and analysis of experiments are conducted to study the performance characteristic. The effects of these parameters on the surface roughness have been investigated using the signal-to-noise (S/N) ratio, analysis of variance (ANOVA). The experiments have been peformed using coated tungsten carbide inserts without any cutting fluid. Experimental results illustrate the effectiveness of this approach.

• 가정과삶의질연구
• /
• 제27권6호
• /
• pp.95-109
• /
• 2009

This study focused on the development of a scale to measure the ability of consumers to use credit cards. The purposes of this study were to develop a tool which would be able to measure consumer knowledge, consumer skills and consumer attitudes. Data were collected from 313 credit card using consumers and were analyzed by employing a goodness of fit test, principal component analysis & confirmatory factor analysis(Amos 5.0), multiple regression. The results from this study were as follows: 1) Six factors of consumer knowledge(16-items) were identified: damage salvation; credit delinquency; personal credit information; credit provision period; credit & credit card issuance; credit delinquent striking out a record & credit rating. The total variance was 55.86%. 2) Three factors of consumer skills(17-items) were identified: credit delinquency & over-consumption; credit card management; and loss & damage salvation. The total variance was 62.90%. 3) Three factors of consumer attitudes(16-items) were identified: credit delinquency & credit; credit card issuance & use; and credit card management. The total variance was 58.75%.

• 복식문화연구
• /
• 제14권4호
• /
• pp.684-697
• /
• 2006

The purpose of this study was to exam the effect of fashion social responsibility of fashion corporate brand on brand attachment and equity. A total of 217 female college students in Seoul and its suburb responded for this study. For data analysis, descriptive statistics, factor analysis, and multiple regression were used for this study. As the result, first, corporate social responsibility was classified into five factors such as social service, public local facility, economic responsibility, consumer protection and environmental protection factors. Second, brand attachment was classified into four factors such as love, interest, perception and trust factors. Third, brand equity was classified into four factors such as loyalty, quality-image, marketing and recognition factors. Generally, fashion social responsibility factors was correlated with higher scores on brand attachment and brand equity. Finally, the results revealed that corporate social responsibility accounted for 12% of the explained variance brand attachment, also brand attachment accounted for 32% of the explained variance brand equity, while Corporate social responsibility accounted for 14% of the explained variance brand equity. Based on these results, fashion brand marketing strategies would be suggested.

• 복식문화연구
• /
• 제14권4호
• /
• pp.647-656
• /
• 2006

A purpose of this research was to analyze an effect of discount stores image on brand equity of fashion brand. One hundred ninety-four women living in Seoul and its suburb were surveyed for this study. For data analysis, descriptive statistics, factor analysis, multiple regression, and ANOVA were used for this study. As the results, first, discount stores image was classified into five factors such as convenience, service, store atmosphere, familarity, and easy use. Second, brand equity was divided into three factors such as brand loyalty, perceived quality and brand recognition. Generally, discount stores images were correlated with brand equity factor. Third, results revealed that service, easy use, convenience, and familarity were 32% of the explained variance in brand loyalty. Also, store atmosphere convenience, service, and easy use were 26% of the explained variance in perceived quality. Results revealed Store Atmosphere and easy use, and familarity were 21% of the explained variance in brand recognition. Based on these results, discount stores in private brand marketing strategies would be suggested.

• 한국연초학회지
• /
• 제4권1호
• /
• pp.15-20
• /
• 1982

This experiment was carried out to investigate the degrees and directions of dominance, and gene distributions by analysing diallel crosses of oriental varieties. The analysis of Wr-Vr indicated non-allelic gene interaction for days to (lowering and number of leaves. Five Plant characteristics showed different degrees of dominance : incomplete dominance for Plant height and leaf shape, over dominance for , wield and sugar, and complete dominance for nicotine. It was shown that additive genetic variance was predominant for plant height, leaf shape, and total sugar. More number of dominant genes were present in Kavala and canthi for Plant height; Basma, Samsun and Izmir for leaf shape ; and Basma and Samsun (or nicotine. Their directions of dominance were tall height, narrow leaves, and low nicotine, respectively.