• Journal of Animal Science and Technology
• /
• v.46 no.1
• /
• pp.7-14
• /
• 2004

The Stearoyl-CoA Desaturase(SCD) is a key enzyme, which converting palmitic acid(16:0) and stearic acid (18:0) to pahnitoleic acid(16:1) and oleic acid(l8:1), respectively. The concentration of oleic acid(18:1) in meat of beef cattle could influence both palatability and perception of meat. This experiment has conducted to determine relationship between the compositions of monounsaturated fatty acids and the SCD mRNA level in bovine liver and loin muscle tissue. The compositions of palmitoleic acid(16:1) and oleic acid(18:1) in loin muscle were 5% and 46% of total lipid and in liver were 2% and 20% of total lipid, respectively. On the other hand, the compositions of palmitic acid(16:0) and stearic acid(18:0) in loin muscle were 25% and 45% of total lipid and in liver were 14% and 43% of total lipid, respectively. The ratio of monounsaturated to saturated fatty acids(the desaturation index) was used as a measure of SCD activity in tissues. The average desaturation index in loin muscle was higher about 3.6-fold than that in liver. The desaturation index of oleate/stearate and palmitoleatelpalmitate in loin muscle were higher 8-fold and 1.8-fold than those in liver, respectively, showing that the substrate specificity of SCD enzyme was very different between liver and muscle tissues. To determine whether the composition of monounsaturated fatty acids in liver and muscle are dependent on SCD expression, SCD mRNA level was examined by RT-PCR analysis. The SCD mRNA level in loin muscle was higher about 3-fold than that in liver. Thus, the quantitative relationship between the desaturation index of fatty acid and SCD mRNA was observed in liver and muscle. The difference in the compositions of monounsaturated fatty acids between bovine liver and muscle tissues may be due to different level of Stearoyl-CoA Desaturase mRNA.

• Korean Journal of Ecology and Environment
• /
• v.39 no.1 s.115
• /
• pp.73-84
• /
• 2006

The objective of this study was to analyze long-term temporal trends of water chemistry and spatial heterogeneity for 10 sampling sites of the Yeongsan River watershed using water quality dataset during 1995 to 2004 (obtained from the Ministry of Environment, Korea). The water quality, based on multi-parameters of biological oxygen demand (BOD), chemical oxygen demand (COD), conductivity, dissolved oxygen (Do), total phosphorus (TP), total nitrogen (TN) and total suspended solids (TSS), largely varied depending on the sampling sites, seasons and years. Largest seasonal variabilities in most parameters occurred during the two months of July to August and these were closely associated with large spate of summmer monsoon rain. Conductivity, used as a key indicator for a ionic dilution during rainy season, and nutrients of TN and TP had an inverse function of precipitation (absolute r values> 0.32, P< 0.01, n= 119), whereas BOD and COD had no significant relations(P> 0.05, n= 119) with rainfall. Minimum values in conductivity, TN, and TP were observed during the summer monsoon, indicating an ionic and nutrient dilution of river water by the rainwater. In contrast, major inputs of total suspended solids (TSS) occurred during the period of summer monsoon. BOD values varied with seasons and the values was closely associated (r=0.592: P< 0.01) with COD, while variations of TN were had high correlations (r=0.529 : P< 0.01) with TP. Seasonal fluctuations of DO showed that maximum values were in the cold winter season and minimum values were in the summer seasons, indicating an inverse relation with water temperature. The spatial trend analyses of TP, TN, BOD, COD and TSS, except for conductivity, showed that the values were greater in the mid-river reach than in the headwater and down-river reaches. Conductivity was greater in the down-river sites than any other sites. Overall data of BOD, COD, and nutrients (TN, TP) showed that water quality was worst in the Site 4, compared to those of others sites. This was due to continuous effluents from the wastewater treatment plants within the urban area of Gwangju city. Based on the overall dataset, efficient water quality management is required in the urban area for better water quality.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.4
• /
• pp.75-86
• /
• 2015

The survey was taken from July to August 2012 by users who visited Gyeongju National Park to compare the perceived gap of users regarding management policy by characteristic of Gyeongju National Park district type in this study. Gyeongju National Park users' characteristic, use pattern and perception regarding park management policy were created as survey items. First, district type was classified based on use pattern of the visitor and the key resources of 8 districts in Gyeongju National Park. Tohamsan District, which has many visitors for the purpose of scenery appreciation and recreation with Bulguksa and Seokguram Grotto, is classified as tourism type, Namsan and Daebon District, which bring in many visitors seeking to learn about historical culture and environmental education, could be classified as historical culture education types, and Hwarang, Seoak, Sogeum River, Gumisan District are places residents use for physical training, hiking and walking to improve health, thus classifying them as neighborhood park types. People perceived that the tourism type is where users for historical artifact tours are concentrated, thus consideration for plans that can improve visitors' satisfaction from a user limit policy is required, and a manager's right to control use behavior must be reinforced in historical culture education types. On the other hand, users of neighborhood parks found the lowest necessity for most of the policy, and this showed that users of each of Gyeongju National Park's districts felt differently about the need for policies. This result is expected to be utilized as a database for introducing policy that reflects the perception of users in each districts of Gyeongju National Park in the future.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.5
• /
• pp.3-16
• /
• 2008

A Wireless Sensor Network (WSN for short) is a wireless network consisting of distributed small devices which are called sensor nodes or motes. Recently, there has been an extensive research on WSN and also on its security. For secure storage and secure transmission of the sensed information, sensor nodes should be equipped with cryptographic algorithms. Moreover, these algorithms should be efficiently implemented since sensor nodes are highly resource-constrained devices. There are already some existing algorithms applicable to sensor nodes, including public key ciphers such as TinyECC and standard block ciphers such as AES. Stream ciphers, however, are still to be analyzed, since they were only recently standardized in the eSTREAM project. In this paper, we implement over the MicaZ platform nine software-based stream ciphers out of the ten in the second and final phases of the eSTREAM project, and we evaluate their performance. Especially, we apply several optimization techniques to six ciphers including SOSEMANUK, Salsa20 and Rabbit, which have survived after the final phase of the eSTREAM project. We also present the implementation results of hardware-oriented stream ciphers and AES-CFB fur reference. According to our experiment, the encryption speeds of these software-based stream ciphers are in the range of 31-406Kbps, thus most of these ciphers are fairly acceptable fur sensor nodes. In particular, the survivors, SOSEMANUK, Salsa20 and Rabbit, show the throughputs of 406Kbps, 176Kbps and 121Kbps using 70KB, 14KB and 22KB of ROM and 2811B, 799B and 755B of RAM, respectively. From the viewpoint of encryption speed, the performances of these ciphers are much better than that of the software-based AES, which shows the speed of 106Kbps.

• Journal of Christian Education in Korea
• /
• v.74
• /
• pp.107-134
• /
• 2023

The purpose of this study is to provide a foundation for establishing the correct direction of education that utilizes artificial intelligence, a key technology of the Fourth Industrial Revolution, in the context of Christian education. To achieve this, theoretical and literature research was conducted. First, the research analyzed the historical development of artificial intelligence to understand its characteristics. Second, the research analyzed the use of artificial intelligence in convergence education from an educational perspective and examined the current policy direction in South Korea. Through this analysis, the research examined the direction of Christian education in the era of artificial intelligence. In particular, the research critically examined the perspectives of continuity and change in the context of Christian education in the era of artificial intelligence. The research reflected upon the fundamental educational purposes of Christian education that should remain unchanged despite the changing times. Furthermore, the research deliberated on the educational curriculum and teaching methods that should adapt to the changing dynamics of the era. In conclusion, this research emphasizes that even in the era of artificial intelligence, the fundamental objectives of Christian education should not be compromised. The utilization of artificial intelligence in education should serve as a tool that fulfills the mission permitted by God. Therefore, Christian education should remain centered around God, rooted in the principles of the Bible. Moreover, Christian education should aim to foster creative and convergent Christian nurturing. To achieve this, it is crucial to provide learners with an educational environment that actively utilizes AI-based hybrid learning environments and metaverse educational platforms, combining online and offline learning spaces. Moreover, to enhance learners' engagement and effectiveness in education, it is essential to actively utilize AI-based edutech that reflects the aforementioned educational environments. Lastly, in order to cultivate Christian learners with dynamic knowledge, it is crucial to employ a variety of teaching and learning methods grounded in constructivist theories, which emphasize active learner participation, collaboration, inquiry, and reflection. These approaches seek to align knowledge with life experiences, promoting a holistic convergence of faith and learning.

• Clean Technology
• /
• v.29 no.4
• /
• pp.255-261
• /
• 2023

Power semiconductors are semiconductors used for power conversion, transformation, distribution, and control. Recently, the global demand for high-voltage power semiconductors is increasing across various industrial fields, and optimization research on high-voltage IGBT components is urgently needed in these industries. For high-voltage IGBT development, setting the resistance value of the wafer and optimizing key unit processes are major variables in the electrical characteristics of the finished chip. Furthermore, the securing process and optimization of the technology to support high breakdown voltage is also important. Etching is a process of transferring the pattern of the mask circuit in the photolithography process to the wafer and removing unnecessary parts at the bottom of the photoresist film. Ion implantation is a process of injecting impurities along with thermal diffusion technology into the wafer substrate during the semiconductor manufacturing process. This process helps achieve a certain conductivity. In this study, dry etching and wet etching were controlled during field ring etching, which is an important process for forming a ring structure that supports the 3.3 kV breakdown voltage of IGBT, in order to analyze four conditions and form a stable body junction depth to secure the breakdown voltage. The field ring ion implantation process was optimized based on the TEG design by dividing it into four conditions. The wet etching 1-step method was advantageous in terms of process and work efficiency, and the ring pattern ion implantation conditions showed a doping concentration of 9.0E13 and an energy of 120 keV. The p-ion implantation conditions were optimized at a doping concentration of 6.5E13 and an energy of 80 keV, and the p+ ion implantation conditions were optimized at a doping concentration of 3.0E15 and an energy of 160 keV.

• Journal of Plant Biotechnology
• /
• v.50
• /
• pp.275-289
• /
• 2023

Since the implementation of the Living Modified Organisms (LMOs) Act in 2008, approximately 10 million tons of genetically modified corn, soybean, potato, canola, and other crops have been imported into South Korea. The import approval procedures have been completed for approximately 191 cases that include seven crops. Of these, approximately 90 cases, excluding crossbreeds of approved LMOs, were reviewed via consultation risk evaluation in four areas: human health, crop culture, natural ecology, and marine fishery environment. LMO developers in South Korea, who are major stakeholders in the import of LMO crops produced overseas, have raised concerns regarding procedural inefficiency in consultation reviews and the need of excessive reviews that are unsuitable for food-feed processing purposes. These procedures reflect the perspective of consultation agencies that deviate from the nature of risk assessment and demand specific supplementary data that do not reflect familiarity and substantial equilibrium. Based on frequent instances of unintentional environmental release of LMO crops imported into Korea, the ministries responsible for consultation insist on a review that considers the climate and natural environment of Korea. In addition, the ministries mandate that their reviews reflect the expertise of competent ministries and are based on risk assessment principles and methods in accordance with international guidelines. In this regard, considering that traits introduced into LMO crops involving familiar agricultural crops have been considered safe for more than two decades, we have suggested reasonable alternatives to several risk assessment items for agricultural LMOs. These alternatives can mitigate conflicts of interest among key stakeholders within the scope of the current LMO regulations.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.8
• /
• pp.337-347
• /
• 2007

An embedded system is called a multi-mode embedded system if it performs multiple applications by dynamically reconfiguring the system functionality. Further, the embedded system is called a multi-mode multi-task embedded system if it additionally supports multiple tasks to be executed in a mode. In this Paper, we address a HW/SW partitioning problem, that is, HW/SW partitioning of multi-mode multi-task embedded applications with timing constraints of tasks. The objective of the optimization problem is to find a minimal total system cost of allocation/mapping of processing resources to functional modules in tasks together with a schedule that satisfies the timing constraints. The key success of solving the problem is closely related to the degree of the amount of utilization of the potential parallelism among the executions of modules. However, due to an inherently excessively large search space of the parallelism, and to make the task of schedulabilty analysis easy, the prior HW/SW partitioning methods have not been able to fully exploit the potential parallel execution of modules. To overcome the limitation, we propose a set of comprehensive HW/SW partitioning techniques which solve the three subproblems of the partitioning problem simultaneously: (1) allocation of processing resources, (2) mapping the processing resources to the modules in tasks, and (3) determining an execution schedule of modules. Specifically, based on a precise measurement on the parallel execution and schedulability of modules, we develop a stepwise refinement partitioning technique for single-mode multi-task applications. The proposed techniques is then extended to solve the HW/SW partitioning problem of multi-mode multi-task applications. From experiments with a set of real-life applications, it is shown that the proposed techniques are able to reduce the implementation cost by 19.0% and 17.0% for single- and multi-mode multi-task applications over that by the conventional method, respectively.

• Journal of Chest Surgery
• /
• v.43 no.5
• /
• pp.499-505
• /
• 2010

Background: There have been several reports using animal experiments that CD1-restricted T-cells have a key role in tumor immunity. To address this issue, we studied the expression of markers for CD1c+ myeloid dendritic cells (DCs) isolated from peripheral blood in the clinical setting. Material and Method: A total of 24 patients with radiologically suspected or histologically confirmed lung cancer who underwent pulmonary resection were enrolled in this study. The patients were divided according to histology findings into three groups: primary adenocarcinoma of lung (PACL), primary squamous cell carcinoma of lung (PSqCL) and benign lung disease (BLD). We obtained 20 mL of peripheral venous blood from patients using heparin-coated syringes. Using flow-cytometry after labeling with monoclonal antibodies, data acquisition and analysis were done. Result: The ratio of CD1c+CD19- dendritic cells to CD1c+ dendritic cells were not significantly different between the three groups. CD40 (p=0.171), CD86 (p=0.037) and HLA-DR (p=0.036) were less expressed in the PACL than the BLD group. Expression of CD40 (p=0.319), CD86 (p=0.036) and HLA-DR (p=0.085) were less expressed in the PACL than the PSqCL group, but the differences were only significant for CD86. Expression of co-stimulatory markers was not different between the PSqCL and BLD groups. Expression of markers for activated DCs were dramatically lower in the PACL group than in groups with other histology (CD40 (p=0.005), CD86 (p=0.013) HLA-DR (p=0.004). Conclusion: These results suggest the possibility that CD1c+ myeloid DCs participate in control of the tumor immunity system and that low expression of markers results in lack of an immune response triggered by dendritic cells in adenocarcinoma of the lung.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.470-478
• /
• 2008

Statement of problem: Use of all-ceramic prostheses fabricated with CAD/CAM systems is increasing in the dentistry. Marginal fidelity in production of all-ceramic restoration has important clinical implications and is a key consideration issue in CAD/CAM production as well. Purpose: The objective of this study was to analyse marginal fidelities of $Procera^{(R)}$ Allceram Crown. Material and methods: On 56 patients treated with $Procera^{(R)}$ system Allceram Crown at Dankook Dental Hospital, marginal discrepancies of 101 abutments were measured by stereomicroscope at coping and final restoration stages. Paired t-test and one-way analysis of variance on marginal discrepancy data were conducted to determine the presence of significant differences between measurement and measuring point stages. Results: Marginal discrepancies of final restoration ($45.82{\pm}30.84\;{\mu}m$) were lower than alumina coping ($53.84{\pm}38.83\;{\mu}m$). Furthermore, the differences were found to be statistically significant at 95% confidence level. Anterior marginal discrepancies were lower than posterior marginal discrepancies, but they were not statistically significant. Lingual marginal discrepancies were higher than other measurement sites, and the differences were found to be statistically significant at 95% confidence level. Conclusion: Within the conditions of this study, marginal fidelities of $Procera^{(R)}$ Allceram Crown were acceptable, and after porcelain build-up, marginal fitness improved over alumina coping. More careful scanning is needed for better results.