• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권1호
• /
• pp.6-11
• /
• 2004

The single phase switched reluctance motor (SRM) has many merits; simple structure and driving circuits, easy operation and speed control, and etc. This paper presents the torque characteristics of disk type single phase SRM by changing the salient pole lengths and pole arcs. The prototype single phase SRM has a three dimensional magnetic flux pattern because of its structure. That is, the radial and axial magnetic flux contributes to torque generation. Thus, 3D analysis is required for computation of its magnetic field. In this paper, 3D FEM is used for analyzing the magnetic flux distribution and magnetic co-energy.

• 대한전자공학회논문지
• /
• 제26권1호
• /
• pp.122-128
• /
• 1989

본 논문에서는 회로해석 중에서 DC및 과도(transient)해석에 필요한 비선형 대수 방정식을 풀기 위한 새로운 방법으로서 Quadratic Newton Raphson Method(QNRM)을 제안한다. QNRM은 Newtok-Raphson method(NRM)에 기본을 두고 있지만, 비선형 대수 방정식의 Taylor 급수 전개에서 2차 미분항을 포함한다. 각 반복 과정에서 미지수에 관한 2차식이 되는데 해를 예측함으로서 선형화 할 수 있다. QNRM의 수렴속도를 올리기 위해서는 이 해의 정확한 예측이 매우 중요하명 그 한 방법을 제시하였다. QNRM을 DC및 과도해석에 적용한 결과 NRM을 사용한 것보다 계산시간 및 반복횟우에 있어서 25% 이상 감소됨을 보여주었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.768-771
• /
• 2003

The impulse between launch vehicle and atmosphere can generate a lot of noise and vibration during the process of launching a satellite. Structurally, electronic equipment (KOMPSAT 2, RDU : Remote Drive Unit) of a satellite consists of aluminum case containing PCB (Printed circuit boards). Each PCB has resistors and IC (Integrated circuits). Noise and vibration of wide frequency band are transferred to the inside of fairing, subsequently creating vibration of the electronic equipment of the satellite. In this situation. random vibration can cause malfunctioning of the electronic equipment of the device. Furthermore, when tile frequency of random vibration meets with natural frequency of PCB. fatigue fracture nay occur in the part of solder joint. The launching environment, thus. needs to be carefully considered when designing the electronic equipment of a satellite. In general. the safety of the electronic equipment is supposed to be related to the natural frequency, shapes of mode and dynamic deflection of PCB in the electronic equipment. Structural vibration analysis of PCB and its electronic components can be performed using either FEM(Finite Element Method) or vibration test. In this study. the natural frequency and dynamic deflection of PCB are measured by FEM, aud the safety of the electronic components of PCB is being evaluated according to the results. This study presents a unique method for finite element modeling and analysis of PCB and its electronic components. The results of FEA are verified by vibration test. The method proposed herein may be applicable to various designs from the electronic equipments of a satellite to home electronics.

• 전자공학회논문지C
• /
• 제36C권1호
• /
• pp.12-21
• /
• 1999

휴대용 통신장비를 비롯한 각종 전자기기는 고집적화 및 소형화 되고 있으며, 이러한 전자기기는 무수히 많은 원하지 않은 전자파를 발생시키고 있다. 이에 따라 EMI 영향을 최소화 하기 위한 연구가 요구되며, 본 연구에서는 전자기기를 구성하는 각 회로들의 반도체 설계 단계에서의 EMI발생 원인을 분석하여 병렬 버퍼의 출력 구동회로와 decoupling 커페시터를 이용하여 EMI를 최소화하는 회로를 제안한다. 이를 i8052에 적용하여 칩을 제작하고 측정한 결과 delta 전류는 1/3으로 감소하였고 EMI는 10dBuV 이상 개선된 결과를 얻었다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.638-648
• /
• 2003

An active capacitance circuit is analyzed in depth and its application to active RF BPF with low noise figure is discussed. The characteristics of the active capacitance circuit made of FET[1] exhibits negative resistance and conventional capacitance, which is easily controlled. However, it is difficult to make the negative resistance adequate in the designated frequency range due to the lack of detailed analysis, which could make an active circuit unstable as the frequency is going higher or lower. In this paper, we analyzed the negative resistance characteristics of active capacitance circuits and also presented the method that the flatness of passband can be controlled. Finally we have designed a 4-stage active BPE, which results in bandwidth of 100 MHz, 0,04 dB insertion loss, 0.2 dB ripple, and noise figure of 2.4 dB at 1.75 GHz band.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1634-1644
• /
• 2016

In this paper, a current-fed two-inductor bi-directional DC/DC converter using resonance (CF-TIBCR) and its design method are proposed. The CF-TIBCR has characteristics of low current ripple and a high current rating because of two separated inductors. Also, it achieves zero voltage switching for all switches and zero current switching for switches of a low voltage stage by using the resonant tank. Besides, a voltage spike problem in conventional current-fed converters is solved without the need for an additional snubber or clamping circuits. As a result, the CF-TIBCR features high step-up and high efficiency. Since the proposed converter has difficulty achieving the soft-switching condition when the converter requires the low voltage transfer ratio, a method that varies the number of resonant cycles is adopted to extend the output voltage range with satisfying the soft-switching condition. The principles of the operation characteristics are presented with a theoretical analysis, and the proposed converter is verified through results of an experiment using a laboratory prototype.

• 반도체디스플레이기술학회지
• /
• 제20권4호
• /
• pp.68-71
• /
• 2021

In this paper, GaN-SBD devices with excellent breakdown voltage and frequency characteristics for use in high-power microwave wireless power transmission has been modeled for PSpice circuit simulation. The RF-DC conversion circuits were simulated and compared with a commercial Si-SBD device. Although the modeled GaN-SBD devices had lower RF-DC conversion efficiency compared to Si-SBD at 2.4 and 5.8 GHz, it was confirmed through PSpice circuit simulations that they can be used sufficiently according to the required application circuit in a high power situation.

• 한국전자통신학회논문지
• /
• 제9권4호
• /
• pp.447-454
• /
• 2014

최근에 양자회로 합성과 관련한 대부분의 방법들은 컴퓨터 시뮬레이션에 적합한 서술적 표현 구조를 채택하고 있어 합성된 양자함수들에 대한 분석이 어렵다. 본 논문에서는 구조가 단순하고 직관적 사고가 가능한 양자회로의 새로운 함수표현법을 제안한다. 본 논문 제안사항은 타깃라인상의 유니터리 연산자들의 직렬 적 행렬연산을 멱함수의 산술연산과 modulo 2 연산이란 수학적 치환을 통해 유니터리 연산자의 제어입력을 자신의 멱함수로 합성하는 새로운 함수합성에 있다. 본 논문의 함수합성 알고리듬은 의사-제어된 NCV-양자게이트를 이용한 가역 및 비가역 양자회로들의 함수표현과 새로운 함수합성에 유용하다.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2001년도 정기학술대회
• /
• pp.337-337
• /
• 2001

High voltage ceramic capacitors are widely applied in power electronic circuits, such as filters, snubbers, and resonant circuits, due to their excellent features of high voltage endurance and low aging. This paper presents a result of failure analysis and reliability evaluation for high voltage ceramic capacitors. The failure nodes and failure mechanisms were identified in order to understand the failure physics in a component. The causes of failure mechanisms for zero resistance phenomena under withstanding voltage test in high voltage ceramic capacitors molded by epoxy resin were studied by establishing an effective closed-loop failure analysis. Also, the condition for dielectric breakdown was investigated. Particular emphasis was placed on breakdown phenomena at the ceramic-epoxy interface. The validity of the results in this study was confirmed by the results of accelerated testing. Thermal shock test as well as pressure cooker test for high voltage ceramic capacitor mounted on a magnetron were implemented. Delamination between ceramic and epoxy, which, might cause electrical short in underlying circuitry, can occur during curing or thermal cycling. The results can be conveniently used to quickly identify defective lots, determine mean time to failure (MTTF) of each lot at the level of Inspection, and detect major changes in the vendors processes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.361-363
• /
• 1997

Electronic devices are very weak against lightning surges injected from grounding systems and can be damaged. The malfunction and damage of electronic circuits bring about several disadvantages such as low operation performances, a lot of economical losses, and etc. In order to obtain the effective protection measure of electronic devices from overvoltages and lightning surges, the analysis of the transient grounding impedances is very important. The aim of this work is to evaluate the behaviors of transient grounding impedances under impulse currents and to investigate the effect of grounding lead wire. Z-t, Z-i and V-i curves of transient grounding impedance under impulse current waveforms have been measured and analyzed.