• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1299-1304
• /
• 2014

This paper is a study for developing an agriculture automatic hose reel of mobile robot. One of the important works in farming is pesticide spraying because it is related to the growth of crops. Therefore, we develop an automatic reel hose and mobile robot. Conducting kinematic analysis of steering performance, the mobile robot is designed to move smoothly even in a small space, and that is verified by simulation. To increase supplying accuracy of the automatic hose reel, the mobile robot use detecting tension mechanism on a hose and a device for the hose deployment. We conduct performance and on-farm evaluation. This system has been maximum speed of 2.5m/s, driving accuracy of ${\pm}0.18^{\circ}$ and driving safety speed of 2m/s. The system would solve an aging population and shortage of workforce in agriculture.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.4
• /
• pp.749-759
• /
• 2009

The purpose of this study was to provide basic information for improving a soft tennis forehand middle volley technique based on kinematic and kinetic analyses of volleys performed by four male national tennis players($33.3{\pm}2.16$ years). The results are as follows. The first phase of the stroke was the longest, covering 64.7% of the stroke time. The displacement of the center of gravity was 48.1% to the right and 54% to the front in the first phase. When impacted, the elbow joint showed the highest average velocity, 3.67m/s, and the upper arm segment displayed the highest angular velocity, $201^{\circ}/s$. The average of the elbow angle and the ball velocity were $149^{\circ}$ and 18.9m/s, respectively. In the ground reaction force, the left and right foot forces in both the x and y directions showed a statistically significant difference. This result seems to indicate that when the left foot is pushed to the right, the force of the right foot is proportional and symmetrical to the left, serving as a supporter.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.53.2-53.2
• /
• 2014

IGRINS, the Immersion GRating INfrared Spectrometer, is a near-infrared wide-band high-resolution spectrograph jointly developed by the Korea Astronomy and Space Science Institute and the University of Texas at Austin. IGRINS employs three HAWAII-2RG focal plane array (FPA) detectors. The mechanical mounts for these detectors serves a critical function in the overall instrument design: Optically, they permit the only positional compensation in the otherwise "build to print" design. Thermally, they permit setting and control of the detector operating temperature independently of the cryostat bench. We present the design and fabrication of the mechanical mount as a single module. The detector mount includes the array housing, a housing for the SIDECAR ASIC, a field flattener lens holder, and a support base. The detector and ASIC housing will be kept at 65 K and the support base at 130 K. G10 supports thermally isolate the detector and ASIC housing from the support base. The field flattening lens holder attaches directly to the FPA array housing and holds the lens with a six-point kinematic mount. Fine adjustment features permit changes in axial position and in yaw and pitch angles. We optimized the structural stability and thermal characteristics of the mount design using computer-aided 3D modeling and finite element analysis. Based on the computer simulation, the designed detector mount meets the optical and thermal requirements very well.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3A
• /
• pp.447-455
• /
• 2006

A general purpose of 4-node co-rotational resultant shell element is developed for the solution of nonlinear problems of reinforced concrete, steel and fiber-reinforced composite structures. The formulation of the geometrical stiffness presented here is defined on the mid-surface by using the second order kinematic relations and is efficient for analyzing thick plates and shells by incorporating bending moment and transverse shear resultant forces. The present element is free of shear locking behavior by using the ANS (Assumed Natural Strain) method such that the element performs very well as thin shells. Inelastic behaviour of concrete material is based on the plasticity with strain hardening and elasto-plastic fracture model. The plasticity of steel is based on Von-Mises Yield and Ivanov Yield criteria with strain hardening. The transverse shear stiffness of laminate composite is defined by an equilibrium approach instead of using the shear correction factor. The proposed formulation is computationally efficient and versitile for most civil engineering application and the test results showed good agreement.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.3
• /
• pp.153-160
• /
• 2017

Gait analysis has been conducted in various environments, but the biomechanics during the transition from uphill walking to downhill walking have not been reported. The purpose of this study is to investigate the knee and ankle joint kinematics and kinetics during walking on a triangle-shaped slope compared with those during level walking. Kinematic and kinetic data of eighteen participants were obtained using a force plate and motion capture system. The greater peak ankle dorsiflexion angle and moment and the peak knee extension moment were observed (p<0.05) during both uphill and downhill walking on the triangle-shaped slope. In summary, uphill walking on a triangle-shaped slope, which showed a peak knee flexion of more than $50^{\circ}$ with greater peak knee extension moment, could increase the risk of patellofemoral pain syndrome. Downhill walking on a triangle-shaped slope, which involved greater ankle dorsiflexion excursion and peak ankle dorsiflexion, could cause gastrocnemius muscle strain and Achilles tendon overuse injury.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.47-65
• /
• 2003

The purpose of this study was to investigate the differences of the kinematical and the kinetical factors that calculated from preflight to postflight of salto forward straight 3/2 turn motion between skitters and less-skitters. four S-VHS video cameras operating at 60Hz were used to record the performances. five elite male gymnasts were participated in this study as subjects. three-dimensional coordinates of 20 body landmarks during each trial were collected using a Direct Linear Transformation method. The digitized body landmarks were smoothed using a Butterworth second order with low pass digital filter and a cutoff frequency of 10Hz. 1. A skitter, got a high score for performance, showed shorter time and faster horizontal velocity than a less-skitter at the board contact. also, a skitter extended quickly his knee and hip joint after contacting board for preflight phase. 2. A skitter revealed faster time and horizontal velocity the vault from taking off board than a less-skiller. A skitter took a long time and high distance to get the vertical peak compared with a less-skiller. 3. For the second phase, a skitter, who executes the most optimal motions among the subjects, displayed a long flight time, a high height, and a far flight distance as well as maintaining consistent horizontal speed even at the peak of post flight. On the other side, a less-scorer displayed a slow vertical velocity, distance and a short time at the point of take-off from vault as well as low height at the peak of post flight.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.7
• /
• pp.134-141
• /
• 2009

Recently, many researchers have tried to develop wearable robots for various fields such as medical and military purposes. We have been studying robotic exoskeletons to assist the motion of persons who have problems with their muscle function in daily activities and rehabilitation. The upper-limb motions (shoulder, elbow and wrist motion) are especially important for such persons to perform daily activities. Generally for shoulder motion 300F is needed to describe its motion(extension/flexion, abduction/adduction, internal/external rotation) but we have used a redundant actuator thus making a 4 DOF system. In this paper, we proposed the mechanism design of the exoskeleton which consists of 4-DOF for shoulder and 1-DOF for elbow robotic exoskeleton to assist upper-limb motion. Then we compared the new mechanism design and prototype mechanism design. Here we also analyze the proposed system kinematically to find out and to avoid the singular point. This research will ensure that the proposed wearable robot system make human's motion more powerfully and more easily.

• The Journal of Korean Physical Therapy
• /
• v.30 no.1
• /
• pp.14-22
• /
• 2018

Purpose: This study examined the effects of the lower limb alignment on the pelvis, hip, and knee kinematics in people with genu varum during stair walking. Methods: Forty subjects were enrolled in this study. People who had intercondylar distance ${\geq}4cm$ were classified in the genu varum group, and people who had intercondylar distance <4cm and intermalleolar distance <4cm were placed in the control group. 3D motion analysis was used to collect the pelvis, hip, and knee kinematic data while subjects were walking stairs with three steps. Results: During stair ascent, the genu varum group had decreased pelvic lateral tilt and hip adduction at the early stance phase and decreased pelvic lateral tilt at the swing phase compared to the control group. At the same time, they had decreased minimal hip adduction ROM at the early stance and decreased maximum pelvic lateral tilt ROM and minimum hip rotation ROM at the swing phase. During stair descent, the genu varum group had decreased pelvic lateral tilt at the early stance and decreased pelvic lateral tilt and pelvic rotation at the swing phase. In addition, they had decreased pelvic frontal ROM during single limb support and increased knee sagittal ROM during the whole gait cycle. Conclusion: This study suggests that a genu varum deformity could affect the pelvis, hip and knee kinematics. In addition, the biomechanical risk factors that could result in the articular impairments by the excessive loads from lower limb malalignment were identified.

• Physical Therapy Korea
• /
• v.9 no.3
• /
• pp.77-91
• /
• 2002

Asymmetrical stance posture, balance, and gait disturbance are common problems in hemiplegic patients. Posterior leaf springs (PLS) are frequently prescribed to correct these problems. Recently, anterior leaf springs (ALS) have also been prescribed, but only limited studies have been performed to investigate the effects of ALS. The purpose of this study was to compare the effects of three conditions, i.e., wearing an ALS, wearing a PLS, and not wearing an AFO (ankle foot orthosis),: on 1) the distribution of weight bearing on the affected side, 2) standing balance, and 3) the gait patterns of hemiplegic patients. Eleven hemiplegic patients (10 men and 1 woman) participated in this study. The data were analyzed by the Friedman test. The results were as follows: 1) More weight bearing on the affected leg was observed in the ALS and PLS conditions than in the condition without an AFO. No significant difference between the ALS and PLS conditions was found. 2) There were statistically significant differences in the composite equilibrium scores (CES) among the three conditions. The CES in the PLS condition was significantly higher than in the ALS condition or the condition without an AFO. 3) Gait patterns improved significantly in the ALS and PLS conditions. No statistically significant difference between the ALS and PLS conditions was found. These results suggest that both ALS and PLS effectively improve the distribution of weight bearing on the affected side, standing balance, and gait patterns of hemiplegic patients. Further study using three-dimensional kinematic analysis and dynamic electromyography is needed to support these findings.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.10
• /
• pp.939-947
• /
• 2010

With the rising numbers of elderly and disabled people, the demand for welfare services using a robotic system and not involving human effort is likewise increasing. This study deals with a mobile-robot system combined with a BWS (Body Weight Support) system for gait rehabilitation. The BWS system is designed via the kinematic analysis of the robot's body-lifting characteristics and of the walking guide system that controls the total rehabilitation system integrated in the mobile robot. This mobile platform is operated by utilizing the AGV (Autonomous Guided Vehicle) driving algorithm. Especially, the method that integrates geometric path tracking and obstacle avoidance for a nonholonomic mobile robot is applied so that the system can be operated in an area where the elderly users are expected to be situated, such as in a public hospital or a rehabilitation center. The mobile robot follows the path by moving through the turning radius supplied by the pure-pursuit method which is one of the existing geometric path-tracking methods. The effectiveness of the proposed method is verified through the real experiments those are conducted for path tracking with static- and dynamic-obstacle avoidance. Finally, through the EMG (Electromyography) signal measurement of the subject, the performance of the proposed system in a real operation condition is evaluated.