• Clinics in Shoulder and Elbow
• /
• v.24 no.2
• /
• pp.88-92
• /
• 2021

Background: Patients who have rotator cuff arthropathy experience a limited range of motion (ROM) of the shoulder joint and experience problems in performing their daily activities; however, no evidence is available to suggest the exact ROM of the shoulder joint in this population. Therefore, this study sought to determine the degree of motion of the shoulder joint in three planes during different activities. Methods: Five subjects with rotator cuff injuries participated in this study. The motion of the shoulder joints on both the involved and normal sides was assessed by a motion analysis system while performing forward abduction (task 1), flexion (task 2), and forward flexion (task 3). The OpenSIM software program was used to determine the ROM of the shoulder joints on both sides. The difference between the ranges of motion was determined using a two-sample t-test. Results: The ROMs of the shoulder joint in task 1 were 93.5°±16.5°, 72.1°±2.6°, and 103.9°±25.7° for flexion, abduction, and rotation, respectively, on the normal side and 28°±19.8°, 31°±31.56°, and 48°±33.5° on the involved side (p<0.05). There was no significant difference between the flexion/extension and rotation movements of the shoulder joint when performing task 1. However, the difference between flexion and rotation movements of the shoulder joints for the second task was significant (p>0.05). Conclusions: Those with rotator cuff arthropathy have functional limitations due to muscle weakness and paralysis, especially during the vertical reaching task. However, although these individuals have decreased ROM for transverse reaching tasks, the reduction was not significant.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.344-350
• /
• 2013

A recent study reporting significantly reduced symmetry in arm swing amplitude in early Parkinson's disease (PD), as measured during gait by auditory cues velocity, led to this investigation of arm swing symmetry and amplitude in PD. The subjects were 14 elderly patients diagnosed with PD. Patients were measured of three conditions performed in random order: slow, general, fast. The auditory cue velocity consisted of a metronome beat ${\pm}20%$ than the subject's general gait speed. Using a motion analysis measurement system, changes in kinematic variables were compared to arm swing analysis. PD groups showed a highly significant reduction of the arm swing amplitude on the more affected body side(MAS)(p<.05). Comparison between the auditory cues velocity, there was a significant increase arm swing amplitude in fast velocity gait than slow and general velocity gait(p<.05). We conclude that motion analysis during gait by auditory cues velocity allows reliable investigation of asymmetric arm movements in early PD patients which attenuate with ongoing disease. The measurement of limb kinematics during gait by auditory cues velocity can broaden our methodological line-up for the analysis of complex motor programs in movement disorders.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.1
• /
• pp.81-87
• /
• 2020

Crack control is essential to increase the durability of concrete significantly. Healing of crack can be controlled by rehydration of unreacted clinkers at the crack surface. In this paper, by comparing the results of isothermal calorimetry test and regression analysis, the Parrot & Killoh's cement hydration model was verified and clink er hydration model was proposed. The composition and quantification of hydration products were simulated by combining kinematic hydration model and thermodynamic model. Hydration simulation was conducted using the verified and proposed hydration model, and the simulation was performed by the substitution rate of clink er. The type and quantity of the final hydration product and healing product were predicted and, in addition, the optimal cementitious material of self-healing concrete was selected using the proposed hydration model.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.1
• /
• pp.11-19
• /
• 2008

This study was conducted with 8 male table tennis players who won national competitions. Of the subjects, 4 used a racket of penholder grip and 4 used one of shake hand grip, and all of them were right.handers. We analyzed three-dimensional angular characteristics such as angular component, swing trajectory and swing posture related to the racket swing motions of forehand drive and smash in table tennis, and drew conclusions as follows. Racket angle(p<.05) and racket swing angle(p<.01) were significantly different between the two motions. In smash, the back swing posture maintained the racket angle large by holding the racket upright and made the racket swing angle small for high ball speed. In addition, the height of the racket head in back swing posture was also significantly different between the two motions. In phg on impact, the open angle of the long axis of the racket was significantly different between the two motions. This shows that impact was applied a bit behind for giving top spin to the ball. In the back swing of drive, the gradient of the upper body was slightly larger in shg than in phg probably because of the structural difference of the racket grip in the neutral posture.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.6
• /
• pp.551-558
• /
• 1991

We investigated the physicochemical and functinal properties of rapeseed(Brassica napus var. Youngsan) protein prepared by combining various soluvent and purification procedures, such as ultrafiltration (UF) concentration and acid-washin. The lightness value(YCIE) of each protein was greadully improved and its hydrophobicity increased by the degree of purification. The analysis of each protein by sodium dodecyl sulfate-plyacrylamide gel electrophoresis (SDS-PAGE) had nine bands revealed without difference, the considerable portion of which were of $1.96~1.59{\times}10^4$ dalton molecular weight. The content of amino acid increased a little more in the other processed proteins than in the control, and decreased considerably in the proteins extracted by the mixed solvent of 1% sodium hexametaphosphate(SHMP) and 0.25M ethlene diamine tetraacetic acid (EDTA). The better proteins were purified, the lower the kinematic viscosities were in their values. The water absorption and foaming properties were scarcely different according to the processes. The oil absorption and the emulsion activity index normally increased according to the degree of purification. The properties of heat coagulation revealed high values only in the proteins processed by EDTA while they showed considerably low values the other proteins.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.11
• /
• pp.1243-1248
• /
• 2011

The purposes of this study were to develop a dynamic model of a human and to investigate the effect of a walker on an elderly subject's motions, such as sit-to-stand (STS) motion and normal gait, by using this model. A human model consisting of 15 segments and 14 joints was developed, embedded in $RecurDyn^{TM}$, and connected through a Simulink$^{(R)}$ interface with collected motion data. The model was validated by comparisons between joint kinematic results from inverse dynamics (Matlab$^{(R)}$-based in-house program) and from $RecurDyn^{TM}$ simulation during walking. The results indicate that the elderly walker induced a longer movement time in walking, such that the speed of joint flexion/extension was slower than that during a normal gait. The results showed that the muscle activities of parts of the ankle and hamstring were altered by use of the elderly walker. The technique used in this study could be very helpful in applications to biomechanical fields.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.4
• /
• pp.347-353
• /
• 2003

Lately, Digital Photogrammetry has been increasingly applied to various hightech industries and becomes one of more interesting focuses of study than ever. Thus, this study aims to develop a Road Horizontal Alignment Information System by means of digital photogrammetry. Data acquired from digital photographic techniques were processed using Delphi, an object oriented programming language to develop a computer aided program, that allows us to build the information on Road Horizontal Alignment(Beginning Point of Curve, Ending Point of Curve, Radius, Intersection Point). The developed program could maximize visualization for better analysis compared with traditional programs because it utilizes many image data. Comparing with data from traditional horizontal alignment extraction programs based on the principle of least square method, the data acquired by Horizontal Alignment Information and kinematic GPS showed out of the developed road information systems the improved accuracy of IP value up to about 2m in the direction of X, Y axes, where the accuracy of curve radius(R) becomes enhanced up to about 2.5 m.

• Steel and Composite Structures
• /
• v.31 no.5
• /
• pp.503-516
• /
• 2019

This work presents a dynamic investigation of functionally graded (FG) plates resting on elastic foundation using a simple quasi-3D higher shear deformation theory (quasi-3D HSDT) in which the stretching effect is considered. The culmination of this theory is that in addition to taking into account the effect of thickness extension (${\varepsilon}_z{\neq}0$), the kinematic is defined with only 4 unknowns, which is even lower than the first order shear deformation theory (FSDT). The elastic foundation is included in the formulation using the Pasternak mathematical model. The governing equations are deduced through the Hamilton's principle. These equations are then solved via closed-type solutions of the Navier type. The fundamental frequencies are predicted by solving the eigenvalue problem. The degree of accuracy of present solutions can be shown by comparing it to the 3D solution and other closed-form solutions available in the literature.

• Journal of Positioning, Navigation, and Timing
• /
• v.13 no.1
• /
• pp.85-92
• /
• 2024

This study develops a Global Positioning System (GPS) Code Multipath Grid Map (CMGM) of each individual domestic reference station from the extracted code multipath of measurement data. Multipath corresponds to signal reflection/refraction caused by obstacles around the receiver antenna, and it is a major source of error that cannot be eliminated by differencing. From the receiver-independent exchange format (RINEX) data for two days, the associated code multipath of a satellite tracking arc is extracted. These code multipath data go through bias correction and interpolation to yield the CMGM with respect to the azimuth and elevation angles. The effect of the CMGM on multipath mitigation is then quantitatively analyzed to improve the Root Mean Square (RMS) of averaged pseudo multipath. Furthermore, the single point positioning (SPP) accuracy is analyzed in terms of the RMS of the horizontal and vertical errors. During two weeks in February 2023, the RMSs of the averaged pseudo multipath for five reference stations decreased by about 40% on average after CMGM application. Also, the SPP accuracies increased by about 7% for horizontal errors and about 10% for vertical errors on average after CMGM application. The overall quantitative analysis indicates that the proposed approach will reduce the convergence time of Differential Global Navigation Satellite System (DGNSS), Real-Time Kinematic (RTK), and Precise Point Positioning (PPP)-RTK correction information in real-time to use measurement data whose code multipath is corrected and mitigated by the CMGM.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.2
• /
• pp.257-263
• /
• 2013

In this study, dynamic behaviors of a wave energy generation system (WEGS) that converts wave energy into electric energy are analyzed using multibody dynamics techniques. Many studies have focused on reducing the effects of a mooring system on the motion of a WEGS. Several kinematic constraints and force elements are employed in the modeling stage. Three-dimensional wave load equations are used to implement wave loads. The dynamic behaviors of a WEGS are analyzed under several wave conditions by using MSC/ADAMS, and the rotating speed of the generating shaft is investigated for predicting the electricity capacity. The dynamic behaviors of a WEGS with a mooring system are compared with those of a WEGS without a mooring system. Stability evaluation of a WEGS is carried out through simulation under extreme wave load.