• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.38-44
• /
• 1995

We made a counter to measure the output of motor encoders for the motion error analysis of a CNC machining center, and have measured the dynamic characteristics and the position errors experimentally. Especially, we measured the radius errors for different feedrates and different radii when the CNC machining center performed a circular interpolation. We have also used an iterative learning method to reduce the radius errors and stick motion errors generated by the CNC machining center performing a circular interpolation. The results show that the proposed learning scheme can reduce the radius error and stick motion error significantly. The reduction of errors becomes more pronounced for higher feedrate and smaller radius.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.264-265
• /
• 2017

This paper aims to analyze relations between design errors prevented by building information modeling (BIM)-based design validation and their impacts in order to identify critical consideration factors for successfully implementing BIM-based design validation in the architecture, engineering, and construction (AEC) projects. More than 800 design errors detected by BIM-based design validation in two BIM-based projects in South Korea are categorized according to its causes and work types. The relations between causes and work types of design errors and project delay, cost overrun, low quality, and rework generation that can be caused by the errors are analyzed through conducting logistic regression. Characteristics of each design error are analyzed by conducting face-to-face interviews with practitioners in the two BIM-based projects. As the results, the impacts of design error causes on predicting project delay, cost overrun, low quality, and rework generation were the highest.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2365-2367
• /
• 2000

The deterministic errors of semiconductor gyros and accelerometers must be estimated and compensated to develop the low-cost IMU using them. Generally, the dominant errors of the low-cost IMU are bias and misalignment errors. Bias is sensitive to temperature. Therefore, in this paper, the effect on temperature of bias is analyzed and temperature compensation are carryed out. It is shown by experiment that the compensation is efficient.

• Journal of applied mathematics & informatics
• /
• 제11권1_2호
• /
• pp.327-340
• /
• 2003

For motion analysis electromagnetic sensors are often used to measure positions and orientations of human subjects. It is observed from several experiments of the Ergonomics Research group that there exist systematic errors and unexpected serious distortions due to some metal masses in the test area. A calibration process is necessary to fix these errors. In this article three models are proposed to correct position measurement errors based on observations from calibration experiments.

• 여성건강간호학회지
• /
• 제17권2호
• /
• pp.187-194
• /
• 2011

Purpose: This study investigated the statistical methods and the results had reported correlation/regression analysis in the studies of Korean Journal of Women Health Nursing (KJWHN). Methods: We reviewed 45 studies using correlation/regression analysis for the suitability of the statistical methods and the research purposes, the criteria for analysis of figures, tables and charts had published in the KJWHN from vol 13 (1) in 2007 to vol 15 (4) in 2009. Results: Forty three studies were fitted to their statistical methodology and their research purposes. Eleven studies considered the minimum sample size. Fourteen regression studies used multiple regression and 12 studies used forward method for variable entry. Only one study among the 17 regression studies accomplished scatter plots and residuals examination. Sixteen studies in correlation studies and six studies in regression studies showed some errors in either the title, variables, category of figures, tables and charts. In the regression study, all reported $R^2$ and ${\beta}$ values except one. Conclusion: It was found that there were still statistical errors or articulation errors in the statistical analysis. All reviewers need to be reviewed more closely for detecting errors not only during reviewing process of the manuscript but also periodic publication for the quality of this academic journal.

• Journal of the Korean Statistical Society
• /
• 제31권1호
• /
• pp.77-91
• /
• 2002

This paper considers a functional regression model with truncated errors in explanatory variables. We show that the ordinary least squares (OLS) estimators produce bias in regression parameter estimates under misspecified models with ignored errors in the explanatory variable measurements, and then propose methods for analyzing the functional model. Fully parametric frequentist approaches for analyzing the model are intractable and thus Bayesian methods are pursued using a Markov chain Monte Carlo (MCMC) sampling based approach. Necessary theories involved in modeling and computation are provided. Finally, a simulation study is given to illustrate and examine the proposed methods.

• 대한토목학회논문집
• /
• 제12권4호
• /
• pp.71-79
• /
• 1992

지진에 관한 지반가속도 기록이나 동적실험에서 계측된 가속도 기록에는, 가속도계의 응답특성, A/D변환기의 성능 및 수치화 과정, 그리고 기록계의 특성 등으로 여러 가지 오차가 포함된다. 이들 오차들은 데이터 해석이나 동적해석시 왜곡된 결과를 유발시킨다. 본 연구에서는 가속도 기록에 포함된 오차를 효율적으로 보정하는 방법을 제안하였다. 제안된 오차보정방법은 다음과 같이 4단계로 나뉘어 진행된다; 1) 보간법을 이용하여 보정에 적절한 데이터를 만든다, 2) 저주파와 고주파 성분이 주를 이루는 수치화 오차를 band-pass필터를 이용하여 제거한다, 3) 가속도계의 특성으로 인한 오차들을 보정한다, 4) 보정된 기록을 적분하여 속도와 변위를 얻는다. 현재 band-pass 필터로는 FIR필터나 IIR필터가 주로 이용되고 있는 데 초기데이터의 왜곡, 위상의 변화, 계산량의 과다와 같은 문제점들을 가지고 있다. 제안된 오차보정방법은 이들 필터의 여러 문제점을 개선하였으며, Fourier 변환의 특성을 이용하여 미분과 적분을 수행함으로써 가속도계의 특성으로 인한 오차의 보정과 속도 및 변위 계산의 정확성을 높였다.

• 지능정보연구
• /
• 제29권3호
• /
• pp.267-286
• /
• 2023

인공지능 스피커로 대표되는 대화형 에이전트는 사람-컴퓨터 간 대화형이기 때문에 대화 상황에서 오류가 발생하는 경우가 잦다. 에이전트 사용자의 발화 기록에서 인식오류는 사용자의 발화를 제대로 인식하지 못하는 미인식오류 유형과 발화를 인식하여 서비스를 제공하였으나 사용자가 의도한 바와 다르게 인식된 오인식오류 유형으로 나뉜다. 이 중 오인식오류의 경우, 서비스가 제공된 것으로 기록되기 때문에 이에 대한 오류 탐지가 별도로 필요하다. 본 연구에서는 텍스트 마이닝 기법 중에서도 단어와 문서를 벡터로 바꿔주는 단어 임베딩과 문서 임베딩을 이용하여 단순 사용된 단어 기반의 유사도 산출이 아닌 단어의 분리 방식을 다양하게 적용함으로써 연속 발화 쌍의 유사도를 기반으로 새로운 오인식오류 및 신조어 탐지 방법을 탐구하였다. 연구 방법으로는 실제 사용자 발화 기록을 활용하여 오인식오류의 패턴을 모델 학습 및 생성 시 적용하여 탐지 모델을 구현하였다. 그 결과, 오인식오류의 가장 큰 원인인 등록되지 않은 신조어 사용을 탐지할 수 있는 패턴 방식으로 다양한 단어 분리 방식 중 초성 추출 방식이 가장 좋은 결과를 보임을 확인하였다. 본 연구는 크게 두 개의 함의를 가진다. 첫째, 인식오류로 기록되지 않아 탐지가 어려운 오인식오류에 대하여 다양한 방식 별 비교를 통해 최적의 방식을 찾았다. 둘째, 이를 실제 신조어 탐지 적용이 필요한 대화형 에이전트나 음성 인식 서비스에 적용한다면 음성 인식 단계에서부터 발생하는 오류의 패턴도 구체화할 수 있으며, 오류로 분류되지 않더라도 사용자가 원하는 결과에 맞는 서비스가 제공될 수 있음을 보였다.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• 제34권4호
• /
• pp.236-241
• /
• 2023

Objectives: According to the 10th revision of the International Classification of Diseases, the main categories of tic disorders (F95.0, F95.1, and F95.2) follow a diagnostic hierarchy based on the duration and diversity of tic symptoms. The present study investigated the use of this diagnostic hierarchy in real-world clinical practice. Methods: Based on the National Health Insurance Service-National Health Information Database, the diagnosis of transient tic disorder (F95.0) made after a diagnosis of chronic motor or vocal tic disorder (F95.1) or Tourette's syndrome (F95.2) and diagnosis of chronic motor or vocal tic disorder (F95.1) made after a diagnosis of Tourette's syndrome (F95.2) were referred to as type A errors. The diagnosis of transient tic disorder (F95.0) repeated after a period of >12 months was referred to as type B error. Demographic and clinical differences according to the diagnostic error types were analyzed using analysis of variance, Student's t-tests, and chi-squared tests. Results: Most participants (96.5%) were without errors in the diagnosis of tic disorders. Higher proportions of males (p=0.005) and antipsychotic prescriptions (p<0.001) were observed in patients with type A or B diagnostic errors. A higher proportion of health insurance holders was observed among those with type A errors (p=0.027). Conclusion: Errors were absent in majority of the tic diagnoses in real-world clinical practice in terms of the diagnostic hierarchy.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.532-540
• /
• 2014

It is necessary to measure the current of rotor for controlling the active and reactive power generated by the stator side of the doubly fed induction generator (DFIG) system. There are offset and scaling errors in the current measurement. The offset and scaling errors cause one and two times current ripples of slip frequency in the synchronous reference frame of vector control, respectively. This paper proposes a compensation method to reduce their ripples. The stator current is variable according to the wind force but the rotor current is almost constant. Therefore input of the rotor current is more useful for a compensation method. The proposed method adopts the synchronous d-axis current of the rotor as the input signal for compensation. The ripples of the measurement errors can be calculated by integrating the synchronous d-axis stator current. The calculated errors are added to the reference current of rotor as input of the current regulator, then the ripples are reduced. Experimental results show the effectiveness of the proposed method.