• 한국디지털정책학회:학술대회논문집
• /
• 2007.06a
• /
• pp.287-296
• /
• 2007

In this paper we present a plan-based Korean dialogue system as a natural language database user interface for product search. The system can be characterized by its support for mixed initiative to give user more control over dialogue, employment of user model to reflect user' spreferences, alternative solution suggestion if there is no product matched exactly to user's requirements, handling circumlocution which frequently occurs in dialogues. The user model ing shell system BGP-MS is adapted for the system. The system provides for a user-friendly database user interface bymanaging dialogue intelligently. By its implementation and test it has been shown that the user model-based dialogue system can be utilized effectively for product search.

• KSBB Journal
• /
• v.14 no.4
• /
• pp.470-475
• /
• 1999

Several enzyme were applied to Laubholz Bleached Kraft Pulp(LBKP) to evaluate the influence on beatability which was measured in Schopper Riegler value, and the results were compared with untreated pulp. Among the types of enzyme, cellulase was found to be the most effective. Addition of cellulase increased the beatability by 28% at optimum condition. Strength properties such as tensile strength and folding endurance also increased with enzymatic treatment by 12% and 46%, respectively. However, excessive dosage of cellulase had an adverse effect on strength properties in spite of the high beatability. Fibrillization by cellulase and destruction of fiber by excessive reaction was observed by Scanning Electron Microscopy(SEM).

• ETRI Journal
• /
• v.9 no.3
• /
• pp.74-85
• /
• 1987

In this paper, a new kind of dual tone multifrequency receiver(DTMFR) is proposed, in which detection is made in terms of the partial correlation(PARCOR) coefficients for efficient DTMF signal detection against both temporary decoding errors by crosstalks possibly coming from adjoint telephone lines during transmission and so-called digit simulation by background voice or noise signals during interdigit period. A simulation study on the behaviour of PARCOR coefficients for tone signals and non-signals has been performed in order to provide the rationale on the feasibility of the proposed DTMFR algorithm. Based upon simulation results, a more refined detection strategy as an example is presented and explained together with the corresponding decision logic.

• The KIPS Transactions:PartA
• /
• v.8A no.1
• /
• pp.70-74
• /
• 2001

A general web-based remote lecture system uses video data and audio data to provide synchronize between teacher and students. This system requires high bandwidth, high speed networking, television, compression and computing technologies between server and client for remote lecture over Internet. As a result, this system can decrease an efficiency for lecturing over current Internet. So, this paper proposes a new mechanism calling as ‘Synchronization of WWW browsers between server and client’to cope with above problems and finally pursues low cost needed for real-time remote lecture over Internet. The mechanism means that every browser of teacher and students displays the same page and the action of teacher is transferred to the browser of student. And, this can be implemented by Windows hooking APIs, Memory Mapping, and DLL (Dynamic Link Library) programming technology. This paper points to the design and implementation of LAS (Lecture Assistant Server) and LAC (Lecture Assistant Client) to perform the synchronization between server and client.

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.521-522
• /
• 2006

Thermally expanded core fiber (TEC-fiber) Bragg gratings have been fabricated and their transmission spectrums have been analyzed. The measured spectrum shows the characteristic peak splitting caused by the grating pair formed over the expanded section that has the effective index axial distribution, which could be employed for high resolution fiber sensors. An analysis on the spectrum can also give useful informations on the effective index profile of the TEC-fiber.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.8
• /
• pp.459-466
• /
• 2000

In this paper, we propose an attitude controller for an unstructured object using CMG(Control Moment of Gyro) subsystem, which has a stabilizer function. The CMG subsystem consists of one motor for spinning the wheel and the other motor for turning the outer gimbal. While the wheel of CMG subsystem is spinning at high speed, applying force to the spin axis of the wheel leads the torque about the vertical axis. We utilize the torque to control the attitude of object in this study. For the stabilizer function, in additiion, holding the load at the current position, the power applied to the gimbal motor of CMG will be cut, which result in the braking force to stop the load by gyro effect. However, due to the gear reduction connected to outer gimbal, slow load motion cannot generate the braking force. Thus, in this study, we are willing to make a holding force by applying control power to the gimbal motor from the signal of piezoelectric gyroscopic sensor that detected the angular velocity of the load. These two features are demonstrated in experiment, carrying a beam with crane. As a result, load was started to rotate by controlling gimbal positiion and was stopped by turning off the gimbal power. Moreover, slow movement of the load was also rejected by additional control with gyroscopic sensor.

• The KIPS Transactions:PartB
• /
• v.13B no.3 s.106
• /
• pp.301-308
• /
• 2006

Currently, the preferred processing of a user-centered ROI(Region-of-Interest) or a specific region of image than the transmission and decompression of a full image is needed in different applications. This preferred processing has been actively studied about from the ROI coding methods in JPEG2000 standards to the new methods complementing them. But, there does not exist an ROI coding method suitable for all applications. Therefore, this study shows a criterion of selection according to the application requirements for applying an adequate ROI coding method in JPEG2000 applications, and shows the experimental results deciding efficient parameters in the selected methods.

• Journal of architectural history
• /
• v.21 no.3
• /
• pp.73-92
• /
• 2012

This study mainly inquired characteristics and changes of 'Chang-aelgool' through 38 cases(with 161 Ssang-chang) of annex and pavillion buildings in Yeong-nam region which are built during the Chosun dynasty. The method of inquiry included actual survey of windows along with bibliographical research, and the results are as below. First, through the discovery of the term 'Chang-aelgool' as an indication of the window-forming frame in 'YeongGeonUiGwe'(1680 A.D), it is apparent that the term 'Chang-aelgool' was widely used in Korea from the late 17th century. Second, the 'Chang-aelgool' of study objects are classified into 4 categories. Type I and II are comprised of mitre-joints which cover the 4 corners of 'Chang-aelgool' and mainly used in building annex and pavillion buildings during the early period of the Chosun dynasty. Type III was widely used during the early and middle period of the Chosun dynasty and drastically dropped in number during the late period of the dynasty. Type IV is comprised of mitre-joint of the upper-half, tenon-jointing of the lower-half and widely used in annex and pavillion building during the late period of the Chosun dynasty. Third, the form of 'Chang-aelgool' has changed from rectangular form with longer width during the early period of Chosun dynasty to square form during the middle period and eventually ended up as a rectangular form with longer height during the late period of the dynasty. Fourth, it is considered that while mullion which is located in the center of 'Chang-aelgool' was mainly used around the main floored room during the early period of the Chosun dynasty, became commonly used in main floored room and 'ondol' rooms during the middle period and drastically dropped in number from then and ended up being not in use after the mid 18th century.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.411.2-411.2
• /
• 2016

직접 메탄올 연료전지 (DMFCs)는 친환경적이고 낮은 작동 온도로 인한 빠른 구동, 높은 에너지 밀도 등 다양한 장점을 가지고 있어 차세대 에너지 변환소자로 많은 관심을 받고 있다. 직접 메탄올 연료전지는 메탄올을 연료로 사용하며, 메탄올이 보유하고 있는 화학적 에너지를 전기 에너지로 변환하는 장치로써 음극에서는 백금 촉매로 인한 메탄올 산화반응, 양극에서는 환원 반응이 일어나며 전기화학적 구동을 하게 된다. 하지만 일산화탄소 피독으로 인한 촉매 활성 저하, 메탄올의 cross over, 백금 촉매 사용으로 인한 고비용 등의 문제점을 가지고 있다. 따라서 많은 연구자들이 백금 사용량을 줄이고 백금 촉매를 고르게 분포하기 위해 값이 저렴하고 넓은 비표면적을 갖는 탄소계 (graphite, graphene, carbon nanotube, carbon nanofiber 등) 지지체 재료를 도입하고 있다. 이 중 탄소나노섬유 (carbon nanofibers, CNFs)는 우수한 전기전도도와 열적/화학적 안정성을 가지고 있으며, 특히 넓은 비표면적을 가지고 있어 백금 촉매의 지지체로서 많은 연구가 진행되고 있다[1]. 따라서 우리는 전기방사법을 활용하여 넓은 비표면적을 보유하는 다공성 탄소나노섬유를 성공적으로 합성하였다. 또한, 이를 백금 촉매의 지지체로 도입하여 직접 메탄올 연료전지를 위한 다공성 탄소나노섬유에 담지된 고분산성 백금 촉매를 제조하였다. 제조한 다공성 탄소나노섬유의 형상 및 구조 분석은 주사전자 현미경 (field-emission scanning electron microscopy)와 투과전자 현미경 (transmission electron microscopy)를 이용하여 분석하였고, 결정구조와 화학적 결합상태는 X-선 회절분석 (X-ray diffraction) 및 X-선 광전자 분광법 (X-ray photoelectron spectroscopy)를 이용하여 규명하였다. 전기화학적 특성은 순환 전압 전류법 (cyclic voltammetry)를 이용하였다. 이러한 실험 결과들을 바탕으로 다공성 탄소나노섬유에 담지된 고분산성 백금 촉매의 자세한 특성을 본 학회에서 다루도록 하겠다.

• Journal of Korea Multimedia Society
• /
• v.9 no.11
• /
• pp.1445-1454
• /
• 2006

To compress a specific part of an image with high quality or to transfer it, JPEG2000 standard offers an ROI(Region-of-Interest) image coding method. What is important in ROI coding is to process relative importance between ROI and background and to process ROI mask. We propose an adaptive ROI coding method supplemented the existing Implicit ROI coding and Modified implicit ROI coding to improve image quality and reduce ROI mask information. The proposed method is an EBCOT-based ROI coding that extracts ROI from the compressed bitstream, and gets the ROI mask information by classifying the codeblocks into 6 patterns. The information includes the pattern type(3bit) and the width(5bit) expressing the boundary between two regions for each codeblock. As a result, the method shows an excellent compression performance in ROI region as well as in the whole region of an image.