• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.10
• /
• pp.606-610
• /
• 2003

Noise subtraction using reference channel data has been used to improve signal-to-noise ratio in magnetoencephalography. In this paper, an adaptive noise subtraction model is proposed and parameters for the model are optimized. A criterion to determine an optimal update period for the filter coefficients is proposed based on the ratio of peak amplitude of evoked field (N100m) divided by the output standard deviation. Experiments are carried out using a 40 channel MEG system. From the experiments, the proposed noise subtraction method shows superior performances over existing non-adaptive methods. Two-dimensional topographic map is shown for a diagnosis with a cubic spline interpolation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.2
• /
• pp.202-209
• /
• 2001

As a part of stringent emission regulations, OBD on a converter is requested by EU and CARB. It demands that MIL is light-on to inform the failure to the driver when the converter is failed in its function. Usually dual oxygen sensor method is used for converter OBD. For this, detail methods, like amplitude ratio, time delay and frequency ratio methods are adapted for vehicle application. Actually, the cars produced later than MY94 for US market are using one of these methods. In this study, OSCs of converters are investigated with an absolute measuring method. The converters are aged with a furnace aging, an engine bench aging and vehicle aging method to represent various aging condition in field applications. An OBD index that is used for TLEVs regulation is also investigated to find a relation between two parameters. The relations of these parameters with THC emission on vehicle are evaluated.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.4
• /
• pp.121-128
• /
• 1998

In this study, when tension and bending stress act on plate simultaneously, stress intensity factor is analyzed at crack tip with using BEM(Boundary Element Method). In this analysis, stress intensity factors(S.I.F) are defined for variable ligament, aspect and stress ratio($\sigma$T/$\sigma$B). Consequently, predicted that crack grow to depth direction at low aspect and ligament ratio in tension stress and to surface direction in bending stress. Tension and bending stress act on plate same time, effect of tension stress in the first stage and effect of bending stress in the after stage was to observed. The outbreak of secondary crack in backside is under the control of stress amplitude and predict that the point of outbreak is mear backside.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.3
• /
• pp.204-215
• /
• 1987

In this paper, 16QAM techniques are described. The evaluated error rate performences are shown in figures as parameters of carrier-to-noise power ratio(CNR), carrier-to-interference power ratio(CIR), impulsive noise index, and Gaussian to impulsive noise power ration. Also, the error rate performances are measured experimentally by hardware system and compared with the theoretical results.

• ETRI Journal
• /
• v.38 no.6
• /
• pp.1124-1134
• /
• 2016

The tone reservation method is one of the most effective pre-distortion methods for peak-to-average power ratio reduction in orthogonal frequency division multiplexing (OFDM) systems. Its direct application to OFDM systems with offset quadrature amplitude modulation (OQAM) is, however, not effective. In this paper, two novel TR-based methods are proposed, specifically designed for OFDM/OQAM systems by taking into consideration the overlapping nature of OQAM signals. These two methods have different approaches to the generation of the peak-cancelling signal. The first one (overlapped scaling tone reservation) generates the peak-cancelling signal using a least squares approximation algorithm with possible adjacent symbol overlap; the second one (multi-kernel tone reservation) generates the peak-cancelling signal by using multiple impulse-like time domain kernels. It is shown by simulation that, when used in OFDM/OQAM systems, the proposed methods can provide better performance than the direct application of the existing controlled clipping tone reservation method, and even outperform the multi-block tone reservation method.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.418-420
• /
• 2003

The fault current limiting characteristics at the initial fault time for flux-lock type high-Tc superconducting fault current limiter(SFCL) were investigated. The amplitude of initial fault current of the flux-lock type SFCL was dependent on the inductance ratio of coil 1 and 2. After fault current limiting mode was analyzed, we compared the calculated value with the experimental one for the initial fault current. The effect of initial fault current due to the inductance ratio of coil 1 and 2 on fault current limiting characteristics was discussed.

• ETRI Journal
• /
• v.28 no.3
• /
• pp.291-300
• /
• 2006

A simple and general bit log-likelihood ratio (LLR) expression is provided for Gray-coded rectangular quadrature amplitude modulation (R-QAM) signals. The characteristics of Gray code mapping such as symmetries and repeated formats of the bit assignment in a symbol among bit groups are applied effectively for the simplification of the LLR expression. In order to reduce the complexity of the max-log-MAP algorithm for LLR calculation, we replace the mathematical max or min function of the conventional LLR expression with simple arithmetic functions. In addition, we propose an implementation algorithm of this expression. Because the proposed expression is very simple and constructive with some parameters reflecting the characteristic of the Gray code mapping result, it can easily be implemented, providing an efficient symbol de-mapping structure for various wireless applications.

• Smart Structures and Systems
• /
• v.26 no.3
• /
• pp.361-371
• /
• 2020

Exact solution for nonlinear behavior of clamped-clamped functionally graded (FG) buckled beams is presented. The effective material properties are considered to vary along the thickness direction according to exponential-law form. The in-plane inertia and damping are neglected, and hence the governing equations are reduced to a single nonlinear fourth-order partial-integral-differential equation. The von Kármán geometric nonlinearity has been considered in the formulation. Galerkin procedure is used to obtain a second order nonlinear ordinary equation with quadratic and cubic nonlinear terms. Based on the mode of the corresponding linear problem, which readily satisfy the boundary conditions, the frequencies for the nonlinear problem are obtained using the Jacobi elliptic functions. The effects of various parameters such as the Young's modulus ratio, the beam slenderness ratio, the vibration amplitude and the magnitude of axial load on the nonlinear behavior are examined.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.95-103
• /
• 1991

A series of experiments were performed to see the dependence of the response characteristics of vortex-induced vibration of flexible cylinders on mass rations for marine applications. Experiments were conducted in the $60cm{\times}60cm$ test section of the cavitation tunnel at the Korea Research Institute of Ships and Ocean Engineering using 5 test rods of 60cm length and 6mm diameter with different mass ratios. It was confirmed quantitatively from the experiments that the low mass ratio cylinders have much broader flow velocity range of large amplitude vibrations than high mass ratio ones.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.548-553
• /
• 2016

본 연구는 타원형 물체가 유체 중에서 침강할 때 물체의 형상과 밀도에 따른 침강특성을 분석하는 것이며, 이로 인해 종단속도에 미치는 영향을 평가하는 것이다. 복잡한 형태의 물체를 타원기둥으로 단순화하였고, 낮은 Reynolds 수(=0.5~100)에 대하여 연구를 진행하였다. 또한 침강형태가 종단속도에 미치는 영향을 연구하였다. 수치해석 검증을 통해 정확하고 효율적인 격자 크기를 결정하였다. 정확한 분석을 위해 단순히 종단속도의 변화를 본 것이 아니라 진동하지 않은 물체의 이론적 속도와 비교하여 이와 얼마나 차이가 있는지를 확인하였다. 수치해석 결과 장단축비에 따라 물체의 침강특성이 크게 변하였고 그 경향은 밀도비에 따라 다른 양상을 보였다. 또한 각의 진동에 대한 진폭과 진동수가 물체의 침강속도에 영향을 주는 것을 확인하고 그 원인에 대해서도 연구하였다.