• 제목/요약/키워드: Ammonium sulfate($NH_4HSO_4$

검색결과 4건 처리시간 0.019초

부산 도심지역 대기중 입자상물질의 크기분포에 따른 수용성 이온성분의 특성 (Size Distribution Characteristics of Water-soluble Ionic Components in Airborne Particulate Matter in Busan)

  • 박기형;이병규
    • 한국대기환경학회지
    • /
    • 제31권3호
    • /
    • pp.287-301
    • /
    • 2015
  • This study was conducted to investigate size distribution characteristics of water-soluble ionic components in the airborne particulate matter (PM) collected from an urban area in Busan using a MOUDI cascade impactor from March to October 2010. The inorganic constituents in the fine particles (${\leq}1.8{\mu}m$) predominantly consisted of sulfate, nitrate, ammonium, and potassium. Sulfate and ammonium concentrations showed a high correlation and similar equivalent concentrations in the fine modes including $0.18{\sim}0.32{\mu}m$, $0.32{\sim}0.56{\mu}m$, and $0.56{\sim}1.0{\mu}m$. This indicates that the main chemical component in the fine particles would be forms of ammonium sulfate such as $(NH_4)_3H(SO_4)_2$, $(NH_4)_2SO_4$, and $(NH_4)HSO_4$. Back trajectory analysis showed that relatively higher concentrations of ammonium, nitrate, and sulfate in the fine mode, compared to the coarse mode, are caused both by domestic sources and long-range transports originated from China continent. High concentration episodes of PM both in the fine mode and the coarse mode were attributed both by anthropogenic sources, such as ship emissions and traffic emissions, and by natural sources such as seawater (sea salt), respectively.

CuO/γ-Al2O3 흡수제/촉매를 이용한 SOx/NOx 제거 반응특성 (Reaction Characteristics of SOx/NOx Removal Using CuO/γ-Al2O3 Sorbent/Catalyst)

  • 유경선;김상돈
    • 대한환경공학회지
    • /
    • 제22권4호
    • /
    • pp.671-678
    • /
    • 2000
  • 열중량분석기와 관형 고정층 반응기에서 $CuO/{\gamma}-Al_2O_3$ 흡수제/촉매의 SOx와 NOx 동시제거 반응특성에 대하여 고찰하였다. $CuO/{\gamma}-Al_2O_3$ 흡수제/촉매의 아황산가스 제거능은 반응온도 $450^{\circ}C$와 담지량 6wt% 이상에서 담체인 알루미나의 반응참여에 의하여 급격히 증가하였다. $CuO/{\gamma}-Al_2O_3$ 흡수제/촉매의 탈질 효율은 반응온도, $370^{\circ}C$에서 최대값을 보였으며 그 이상의 온도에서는 $NH_3$가스의 산화반응에 의하여 반응온도가 증가할수록 제거효율은 감소하였다. 흡수제/촉매 표면에 sulfate가 존재하는 경우 최대 탈질 효율을 보이는 반응온도는 증가하였다. SOx와 NOx 동시 제거반응에서 $CuO/{\gamma}-Al_2O_3$ 흡수제/촉매의 NO제거 활성은 $NH_4HSO_4$와 같은 암모늄염의 생성으로 인하여 크게 감소하였다. SOx와 NOx 동시제거 반응에 있어서 최대의 탈질 효율을 보이는 반응온도는 $SO_2$ 가스의 존재로 인하여 $400^{\circ}C$로 증가하였다.

  • PDF

상용디젤엔진의 EURO-IV 배기규제 대응을 위한 Urea-SCR 시스템의 나노입자 배출특성에 관한 실험적 연구 (An Experimental Study of Nano PM Emission Characteristics of Commercial Diesel Engine with Urea-SCR System to Meet EURO-IV)

  • 이천환;조택동
    • 한국자동차공학회논문집
    • /
    • 제15권6호
    • /
    • pp.128-136
    • /
    • 2007
  • It is well known that two representative methods satisfy EURO-IV regulation from EURO-III. The first method is to achieve the regulation through the reduction of NOx in an engine by utilizing relatively high EGR rate and the elimination of subsequently increased PM by DPF. However, it results in the deterioration of fuel economy due to relatively high EGR rate. The second is to use the high combustion strategy to reduce PM emission by high oxidation rate and trap the high NOx emissions with DeNOx catalysts such as Urea-SCR. While it has good fuel economy relative to the first method mentioned above, its infrastructure is demanded. In this paper, the number distribution of nano PM has been evaluated by Electrical Low Pressure Impactor(ELPI) and CPC in case of Urea-SCR system in second method. From the results, the particle number was increased slightly in proportion to the amount of urea injection on Fine Particle Region, whether AOC is used or not. Especially, in case of different urea injection pressure, the trends of increasing was distinguished from low and high injection pressure. As low injection pressure, the particle number was increased largely in accordance with the amount of injected urea solution on Fine Particle Region. But Nano Particle Region was not. The other side, in case of high pressure, increasing rate of particle number was larger than low pressure injection on Nano Particle Region. From the results, the reason of particle number increase due to urea injection is supposed that new products are composited from HCNO, sulfate, NH3 on urea decomposition process.

Synthesis and Solution Properties of Zwitterionic Copolymer of Acrylamide with 3-[(2-Acrylamido)dimethylammonio]propanesulfonate

  • Xiao, Hui;Hu, Jing;Jin, Shuailin;Li, Rui Hai
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권9호
    • /
    • pp.2616-2622
    • /
    • 2013
  • A novel zwitterionic monomer 3-[(2-acrylamido)dimethylammonio]propanesulfonate (DMADAS) was designed and synthesized in this study. Then it was polymerized with acrylamide (AM) by free radical polymerization in 0.5 mol/L NaCl solution with ammonium persulfate ($(NH_4)_2S_2O_8$) and sodium sulfate ($NaHSO_3$) as initiator. The structure and composition of DMADAS and acrylamide-3-[(2-acrylamido)-dimethylammonio]propanesulfonate copolymer (P-AM-DMADAS) were characterized by FT-IR spectroscopy, $^1H$ NMR and elemental analyses. Isoelectric point (IEP) of P-AM-DMADAS was tested by nanoparticle size and potential analyzer. Solution properties of copolymer were studied by reduced viscosity. Antipolyelectrolyte behavior was observed and was found to be enhanced with increasing DMADAS content in copolymer. The results showed that the viscosity of P-AM-DMADAS is 5.472 dl/g in pure water. Electrolyte was added, which weakened the mutual attraction between sulfonic acid group and quaternary ammonium group. The conformation became loose, which led to the increase of reduced viscosity. The ability of monovalent and divalent cation influencing the viscosity of zwitterionic copolymer obeyed the following sequence: $Li^+$ < $Na^+$ < $K^+$, $Mg^{2+}$ < $Ca^{2+}$ < $Ba^{2+}$, and that of anion is in the order: $Cl^-$ < $Br^-$ < $I^-$, $CO{_3}^{2-}$ > $SO{_3}^{2-}{\approx}SO{_4}^{2-}$.