• 대한환경공학회지
• /
• 제30권7호
• /
• pp.700-704
• /
• 2008

혐기성 암모니아 산화공정에서 nitrite는 저해인자로 잘 알려져 있고, 최근에는 유리 암모니아 역시 anammox bacteria에 저해 영향을 주는 것으로 보고되고 있다. 유입수의 암모니아와 아질산의 비율이 연속운전에서 효과적인 질소제거에 중요한 인자가 되며, 연속운전 반응기에서는 유리 암모니아와 아질산의 축적을 방지하기 위해 유입수의 NH$_3$-N/NO$_2$-N-N비를 조절할 필요가 있다. 이에 본 연구에서는 다섯 가지 종류의 NH$_3$-N/NO$_2$-N-N비를 회분식 실험을 통해 잔류 암모니아성 질소와 아질산성 질소의 농도를 최소화하는 비를 조사하였다. 회분식 실험 결과 실험 26시간 후에 1.00 : 1.30의 비에서 88%에 달하는 총질소 제거율이 나타났다. 그리고 혐기성 암모늄 산화 반응은 0차 반응을 나타내었고, 암모니아와 아질산의 반응 속도상수는 1.00 : 1.30의 비에서 각각 7.66 mg/L$\cdot$hr과 11.89 mg/L$\cdot$hr로 가장 높게 나타났다. 혐기성 암모늄 산화균 활성도를 측정해본 결과 1.00 : 1.15의 비에서 미생물의 활성도가 가장 우수한 것으로 나타났다. 회분식 실험의 결과를 통해, 이론적 반응비과 비슷한 1.00:1.30에서는 반응속도가 크고 총질소 제거율도 높은 반면 혐기성 암모늄 산화균은 이론적 반응비보다 다소 낮은 아질산 농도에서 안정하다는 것을 확인할 수 있었다.

• 한국물환경학회지
• /
• 제22권4호
• /
• pp.599-604
• /
• 2006

Nitrogen removal with the combined SHARON (Single reactor system for high ammonium removal over nitrite)ANAMMOX (Anaerobic ammonium oxidation) process using the effluent of ADEPT (Anaerobic digestion elutriated phased treatment) slurry reactor with very low C/N ratio for piggery waste treatment was investigated. For the preceding SHARON reactor, ammonium nitrogen loading and removal rate were $0.97kg\;NH_4-N/m^3_{reactor}/day$ and $0.68kg\;NH_4-N/m^3_{reactor}/day$ respectively. In steady state, bicarbonate alkalinity consumption for ammonium nitrogen converted to $NO_2-N$ or $NO_3-N$ was 8.4 gram per gram ammonium nitrogen. The successive ANAMMOX reactor was fed with the effluent from SHARON reactor. The loading and removal rate of the soluble nitrogen defined as the sum total of $NH_4-N$, $NO_2-N$ and $NO_3-N$ in ANAMMOX reactor were $1.36kg\;soluble\;N/m^3_{reactor}/day$ and $0.7kg\;soluble\;N/m^3_{reactor}/day$, respectively. The average $NO_2-N/NH_4-N$ removal ratio by ANAMMOX was 2.41. Fluorescence in situ hybridization (FISH) analysis verified that Candidatus Kuenenia stuttgartiensis were dominate, which means that they played an important role of nitrogen removal in ANAMMOX reactor.

• 수도
• /
• 통권64호
• /
• pp.19-33
• /
• 1993

• 대한금속재료학회지
• /
• 제48권1호
• /
• pp.49-56
• /
• 2010

This study investigated how the surface of Al-12wt.%Si alloy modified by the plasma electrolytic oxidation process (PEO). The PEO process was performed in an electrolyte with sodium hexametaphsphate as a conducting salt, and the effect of ammonium metavanadate on variations in the morphology of electrochemically generated oxide layers on the alloy surface was investigated. It is difficult to form a uniform passive oxide layer on Al alloys with a high Si content due to the differences in the oxidation behavior of the silicon-rich phase and the aluminum-rich phase. The oxide layer covered the entire surface of the Al-12WT.%Si alloy uniformly when ammonium metavanadate was added to the electrolyte. The oxide layer was confirmed as a mixture of $V_2O_3$ and $V_2O_5$ by XPS analysis. In addition, the oxide layer obtained by the PEO process with ammonium metavanadate exhibited a black color. Application of this surface modification method is expected to solve the problem of the lack of uniformity in the coloring of oxide layeres caused by different oxidation behaviors during a surface treatment.

• 대한화학회지
• /
• 제41권12호
• /
• pp.661-665
• /
• 1997

Ammonium dinitramide(ADN)은 최근에 개발된 고체 산화제로 ammonium perchlorate(AP)나 ammonium nitrate(AN) 등을 대체할 수 있다. Bis(2-cyanoethyl)amine에 니트로화 반응을 시킨 후 염기 처리하여 cyanoethyl기를 제거하고 NA2BF4를 사용하여 두번째 니트로 기를 도입하면 ADN 합성에 중요한 중간체인 3-N-Nitro-bis(2-cyanoethyl)amine은 N-nitroso 화합물의 산화반응으로 얻을 수도 있다.

• 한국물환경학회지
• /
• 제30권1호
• /
• pp.1-7
• /
• 2014

The purpose of this study was to investigate the nitrification characteristics of biological aerated filter (BAF) packed with ceramic media, especially focusing on nitrite build-up during nitrification. When increasing the nitrogen load above $1.63kgNH_4{^+}-N/m^3{\cdot}d$, ammonium removal efficiency decreased to less than 60% and the nitrite ratio ($NO_2{^-}-N/NO_x-N$) of higher than 75% was achieved due to the inhibitory free ammonia (FA, $NH_3-N$) concentration and oxygen limitation. FA inhibition, however, is not recommended strategy to promote nitrite build-up since FA concentration in the reactor is coupled with decreased ammonium removal efficiency. Nitrite ratio in the effluent was also affected by aeration rate and influent ammonium concentration. Ammonium oxidation was enhanced at a higher aeration rate regardless of influent ammonium concentration but, the nitrite ratio was dependent on both aeration rate and influent ammonium concentration. While a higher nitrite ratio was obtained when BAFs were fed with $50mgNH_4{^+}-N/L$ of influent, the nitrite ratio significantly decreased for a greater influent concentration of $200-300mgNH_4{^+}-N/L$. Taken together, aeration rate, influent ammonium concentration and FA concentrations kept in the BAF were found to be critical variables for nitrite accumulation in the BAF system.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권3호
• /
• pp.199-204
• /
• 2006

The purpose of this work was to evaluate the development of the anammox process by the use of granular sludge selected from a digestion reactor as a potential seed source in a lab-scale UASB (upflow anaerobic sludge blanket) reactor system. The reactor was operated for approximately 11 months and was fed by synthetic wastewater. After 200 days of feeding with $NH_4^+\;and\;NO_2^-$ as the main substrates, the biomass showed steady signs of ammonium consumption, resulting in over 60% of ammonium nitrogen removal. This report aims to present the results and to more closely examine what occurs after the onset of anammox activity, while the previous work described the start-up experiment and the presence of anammox bacteria in the enriched community using the fluorescence in situ hybridization (FISH) technique. By the last month of operation, the consumed $NO_2^--N/NH_4^+-N$ ratio in the UASB reactor was close to 1.32, the stoichiometric ratio of the anammox reaction. The obtained results from the influent-shutdown test suggested that nitrite concentration would be one key parameter that promotes the anammox reaction during the start-up enrichment of anammox bacteria from granular sludge. During the study period, the sludge color gradually changed from black to red-brownish.

• 대한토목학회논문집
• /
• 제26권4B호
• /
• pp.421-426
• /
• 2006

본 연구는 생물학적 질산화 공정에서 암모늄 이온과 활성을 가진 질산화균의 초기 농도가 질산화에 미치는 영향을 확인하고, 이에 따른 동역학식을 제시하고자 하였다. 먼저 실험에 이용된 슬러지의 질산화균 농도는 미생물 호흡률 실험으로 측정하였는데, 배양된 슬러지 중 42.8%가 활성을 가진 질산화균으로 나타났다. 암모늄 이온과 질산화균의 초기 농도를 달리하여 $N_0/X_0$비가 0.025~0.493의 조건에서 잘산화 실험을 실시하였으며, 이를 통해 암모늄 이온과 질산화균의 농도가 상이하더라도 $N_0/X_0$ 비가 동일할 경우 암모늄 산화율이 동일함을 확인하였다. 또한 $N_0/X_0$ 비와 비기질이용율의 관계는 Contois 형태의 관계식으로 표현되었으며, 최대 비암모늄산화율($q_{Nmax}$)은 4.32 gN/gVSS/day, 반 포화속도 상수($K_N{^{\prime}}$)는 0,013 gN/gVSS인 것으로 확인되었다.

• 한국수산과학회지
• /
• 제37권1호
• /
• pp.13-17
• /
• 2004

The effects of temperature on nitrification of enriched nitrifiers were investigated by using kinetics and thermodynamics method through the batch test. Aquaculture recirculating water, which was sampled at Chung Cheong Buk-Do Inland Fisheries Research Institute, was analized to observe the characteristics of nitrification. Temporal variation of ammonium, nitrite and nitrate concentration was measured at batch experiments. Activation energy was calculated using Arrhenius equation with the oxidation rates of specific ammonium or nitrite ion. These oxidation rates were measured at temperature range of $6-35^{\circ}C$ and ammonium concentration range of 0.2-1.8 mg/L. Two distinct activation energy of Nitrosomonas sp. at temperature $6-15^{\circ}C\;and\;15-35^{\circ}C$ was 93.1 and 25.0 KJ/mol, respectively. Nitrate accumulation was observed at temperature over $15^{\circ}C.$

• Journal of the Korean Wood Science and Technology
• /
• 제47권5호
• /
• pp.597-606
• /
• 2019

Cellulose nanocrystals (CNCs) were successfully isolated from oil palm fronds (OPFs) using different concentrations of ammonium persulfate (APS), and their characteristics were analyzed by Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), X-ray diffraction (XRD) analysis, and thermogravimetric analysis (TGA). APS oxidation effectively isolated CNCs with rod-like morphology in nanometer scale. The dimensions of the CNCs decreased with increasing APS concentration. FTIR and XRD analyses revealed that all the CNCs showed crystals in the form of cellulose I without crystal transformation occurring during APS treatment. The relative crystallinity of the CNCs increased with increasing APS concentration, whereas their thermal stability decreased. An APS concentration of 2 M was found to be optimal for isolating the CNCs.