• Journal of the Korean Applied Science and Technology
• /
• v.12 no.1
• /
• pp.81-86
• /
• 1995

Some weight loss accelerating agents, dodecyltrimethylammonium chloride(DTAC), dodecyltrimethylammonium bromide(DTAB), dodecyldimethylammonium chloride(DDBAC), polyoxyethylene(2) dodecylbenzylammonium chloride(PDBAC), and 1-(2-hydroxyethyl)-1-benzyl-2-undecylimidazolinium chloride(AEUIC), were synthesized. As a result of weight loss treatment of the weight loss accelerating agents with NaOH to PET fiber, the increase of weight loss was the order of PDBAC > DDBAC > DTAC > DTAB > AEUIC. Among the weight loss accelerating agents, AEUIC hardly showed weight loss effect, and it was separated into two layer in the NaOH solution at the treatment concentration above 6g/L, but POBAC showed good weight loss effect of 21% that approach almost to a theoretical weight loss, 21.6%, at the concentration above 8g/L.

• Resources Recycling
• /
• v.31 no.2
• /
• pp.40-48
• /
• 2022

In this study, the effects of solution components were investigated in the recovery of vanadium as ammonium metavanadate from vanadium-ore-salt roasting-water leaching solution. The vanadium-containing solution is strongly alkaline (pH 13), so the pH must be lowered to 9 or less to increase the ammonium metavanadate precipitation efficiency. However, in the process of adjusting the solution pH using sulfuric acid, aluminum ions are co-precipitated, which must be removed first. In this study, aluminum was precipitated in the form of an aluminum-silicate compound using sodium silicate, and the conditions for minimizing vanadium loss in this process were investigated. After aluminum removal, the silicate was precipitated and removed by adjusting the solution pH to 9 or less using sulfuric acid. In this process, the concentration and addition rate of sulfuric acid have a significant influence on the loss of vanadium, and vanadium loss was minimized as much as possible by slowly adding dilute sulfuric acid. Ammonium metavanadate was precipitated using three equivalents of ammonium chloride at room temperature from the aluminum-free, aqueous solution of vanadium following the pH adjustment process. The recovery yield of vanadium in the form of ammonium metavanadate exceeded 81%. After washing the product, vanadium pentoxide with 98.6% purity was obtained following heat treatment at 550 ℃ for 2 hours.

• Applied Chemistry for Engineering
• /
• v.4 no.4
• /
• pp.715-720
• /
• 1993

Diphenylmethane (pKa=33.4), which is difficult to be oxidized in normal oxidation conditions, was oxidized to produce benzophenone at ambient temperature and atmospheric pressure by using phase transfer catalysts and solid potassium tert-butoxide as base. Quaternary salt such as benzyltriethylammonium chloride, tetrabutyl ammonium bisulfate, tetrabutylphosponium chloride, are ineffective catalysts for this reaction, but 18-crown-6 and polyethylene glycols showed catalytic activity. The conversion of diphenylmethane was increased with increasing chain length of PEG molecules when they are used as phase transfer catalysts both in equal molar and equal weight basis. The conversion of diphenylmethane was increased with the agitation speed, and aprotic solvent like DMF showed higher reaction rate compared with benzene.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.3
• /
• pp.337-344
• /
• 2014

In this paper, we have examined the interaction of low bandgap polymer {poly(2-heptadecyl-4-vinylthieno[3,4-d]thiazole)(PHVTT)} with ionic liquids. Further, we have studied the temperature dependent interactions between the ionic liquids [tri-butyl methyl ammonium methyl sulfate ([TBMA][$MeSO_4$]), methyl imidazolium chloride ([MIM]Cl) and butyl methyl imidazolium chloride ([BMIM]Cl)] and polymer using UV-vis spectroscopy, FT-IR spectroscopy, photoluminescence (PL) spectroscopy, as a function of temperature at 21, 28, 32, $37^{\circ}C$. These experimental results suggest that interactions of polymer with ionic liquids ([MIM]Cl, [TBMA][$MeSO_4$]) showed weak interactions by increasing temperature but [BMIM]Cl has no significant effect with increase in temperature.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.30 no.1
• /
• pp.33-39
• /
• 2022

Batch experiments were conducted to find out the effects of various types of magnesium compounds on phosphorus recovery by magnesium ammonium phosphate (MAP) crystallization. The phosphorus recovery from the centrate of anaerobic digested sludge was performed using magnesium chloride, magnesium hydroxide and magnesium oxide under different pH (7.5, 8.0 and 8.5) and Mg/P molar ratio (1.0, 1.5, 2.0, 2.5) conditions. The phosphorus recovery rate increased with increasing pH and Mg/P molar ratio in all magnesium compounds. At pH 7.5, magnesium oxide showed the highest phosphorus recovery rate, followed by magnesium hydroxide and magnesium chloride. However, at pH 8.5, more than 90% of phosphorus recovery rate was obtained in all Mg/p molar ratios. Thus, it is expected that magnesium hydroxide and magnesium oxide are able to replace magnesium chloride as a magnesium source in terms of phosphorus recovery efficiency and cost.

• Journal of radiological science and technology
• /
• v.2 no.1
• /
• pp.89-93
• /
• 1979

Fricke dosimeter solution in chemical dosimeters consists of Ferrous sulfate, Sodium chloride and Sulfuric acid. Authors made a new experiment on the characteristics of dosimeter solution with Ammonium Thiocyanate and the results obtained were as follows; 1. The chemical oxidation response after irradiation was very rapid(within fifteen minutes). 2. A preventive measure of the spontaneous oxidation as time goes on was possible to use 0.1 mM instead of 1mM Ferrous sulfate solution. 3. 477nm in wavelength of spectrophotometer was most ideal to measure optical density in this solution

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.6
• /
• pp.573-583
• /
• 2000

In order to investigate the characteristics of PM(sub)2.5 in the background area, the following pollutant were measured from February 1996 to June 1999 in Kanghwa: PM(sub)2.5 mass, sulfate, nitrate, chloride, ammonium, sodium, calcium, magnesium and potassium. The mean concentration of PM(sub)2.5 mass was 25.8$\pm$1.2$\mu\textrm{g}$/㎥(range 5.18~85.74). This value was higher than the annual PM(sub)2.5 US NAAQS(15$\mu\textrm{g}$/㎥) and the total number of samples higher than the 24-h PM(sub)2.5 US NAAQS(65$\mu\textrm{g}$/㎥) was seven. PM(sub)2.5 masses also showed temporal variations both yearly and seasonally. Total water soluble ions constituted about 45% of PM(sub)2.5 miss, and sulfate, nitrate and ammonium were main components in water soluble ions. Compared with the literature data from other areas, the measured PM(sub)2.5 concentrations were relatively high.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.3 no.1
• /
• pp.40-43
• /
• 1998

The glycosylation pattern of Erythropoietin (EPO), produced by recombinant CHO cells, was studied using the simple and rapid technique of 'Lectin-blotting'. In this experiment we used three different kinds of lectins, MAA(Maackia amurensis agglutinine), RCA(Ricinus communis agglutinine), and DSA(Datura stramonium agglutinine), which bind to the terminal sialic acid, galactose, and the N-acetyllactosamine chain respectively. The lectin-blotting technique was used to analyze the carbohydrate structure of EPO produced in the presence of two physiologically active chemical compounds, ammonium and chloroquine. The effect of the ammonium ion on the glycosylation of EPO was studied because it accumulated in the medium mainly as a by-product of glutamine matabolism. Ammonium chloride significantly inhibited the sialylation of the terminal galactose residue at concentrations of 8mM or more. Chloroquine, a potent inhibitor of glycosylation, inhibited terminal sialylation at concentrations of 100 and 200 $\mu$M, and at a concentration of 300 $\mu$M, also inhibited Nacetyllactosamine chain synthesis.

• Journal of Radiation Industry
• /
• v.6 no.1
• /
• pp.49-54
• /
• 2012

Various anion exchange membranes were prepared by radiation graft copolymerization of vinylbenzyl chloride onto fluorinated films and subsequent quaternization with various tertiary amines such as trimethylamine, N,N-dimethylbuthylamine, N,N-dimethylaniline, and N-methylpiperidine. The quaternizations of the anion exchange membranes were confirmed by measuring of the ion exchange capacities of the membranes. The mechanical properties and the water uptakes were also measured. The elongation at break was found to be largely dependent on the fluorinated film, the quateranry ammonium, and the degree of grafting. The results indicate that the poly (ethylene-alt-tetrafluoroethylene) with quaternized trimethylamine moiety exhibits higher flexible property compared to the other prepared anion exchange membranes.

• Korean Journal of Weed Science
• /
• v.3 no.2
• /
• pp.190-198
• /
• 1983

To examine the possibility of enhancing activity of foliar applied herbicides by spray methods and additives, field experiments were conducted to evaluate the effects of surfactant, spray volume, and additions of ammonium sulfate or potassium chloride to glyphosate on toxicity to Digitaria sanguinalis or Artemisia princeps. Glyphosate toxicity increased as spray volume was decreased from 120 1/10a to 40 and 80 1/10a. Additions of surfactant in the spray solution increased toxicity of glyphosate to D. sanguinalis and usually more pronounced effect was obtained at glyphosate 30.5g a.i./10a. Additions of 1 and 5% (w/v) ammonium sulfate to glyphosate increased toxicity to A. princeps at glyphosate 30.5 and 61.5g a.i./10a. 10% ammonium slufate, however, had no effect or were antagonistic. Additions of potassium chloride at 1,2 and 3% (w/v) were also very effective to increase herbicidal activity to A. princeps at glyphosate at 30.5 and 61.0g a.i/10a. These results suggest that the practices for enhancement of herbicidal activity by improvement of spray method and additions of ammonium sulfate or potassium chloride to glyphosate can be employed to use lower herbicide levels while giving the same degree of weed control in orchards and non-crop lands.