• Bulletin of the Korean Chemical Society
• /
• v.34 no.12
• /
• pp.3659-3664
• /
• 2013

Eight representative explosives (ammonium perchlorate (AP), ammonium nitrate (AN), trinitrotoluene (TNT), 2,4-dinitrotoluene (DNT), cyclonite (RDX), cyclotetramethylenetetranitramine (HMX), pentaerythritol tetranitrate (PETN), and hexanitrostilbene (HNS)) were comprehensively analyzed with an ion trap mass spectrometer in negative ion mode using direct infusion electrospray ionization. MS/MS experiments were performed to generate fragment ions from the major parent ion of each explosive. Explosives in salt forms such as AP or AN provided cluster parent ions with their own anions. Explosives with an aromatic ring were observed as either $[M-H]^-$ for TNT and DNT or $[M]^{{\cdot}-}$ for HNS, while explosives without an aromatic ring such as RDX, HMX, and PETN were detected as an adduct ion with a formate anion, i.e., $[M+HCOO]^-$. These findings provide a guideline for the rapid and accurate detection of explosives once portable MS instruments become more readily available.

• Journal of Microbiology and Biotechnology
• /
• v.5 no.3
• /
• pp.158-162
• /
• 1995

The effect of carbon and nitrogen sources on the production of novel aminopeptidase M inhibitors MR-387A and B by Streptomyces sp. SL-387 has been studied. High D-glucose and ammonia concentrations (5$\%$ and 1$\%$, respectively) exerted a negative influence on the inhibitor formation. The suppressive effect of glucose on the inhibitor formation is probably caused by an effect of medium pH rather than that of cyclic AMP. To establish the optimum conditions for inhibitor overproduction, various nitrogen sources and ammonium ion-trapping agents were examined. The use of ammonia slow-releasing nitrogen sources such as soybean meal and fish meal, or ammonium ion-trapping agents such as kaoline, celite, and natural zeolite achieved the enhancement of inhibitor production. These results also indicate that inhibitor formation is affected by ammonium ion repression.

• Resources Recycling
• /
• v.27 no.2
• /
• pp.48-54
• /
• 2018

Batch ion exchange experiments of Au(III) were performed from ammonium chloride solution by employing strong anionic exchange resins (Amberlite IRA 402 and AG 1-X8). Au(III) was well loaded into the two resins and the loading behavior of Au(III) into AG 1-X8 was superior to that into Amberlite IRA 402. The loading of Au(III) into AG 1-X8 followed Langmuir adsorption isotherm and the experimentally determined loading capacity was 355 mg/g. Au(III) was successfully eluted by $HClO_4$ from the loaded AG 1-X8 and the elution percentage of Au(III) increased with the concentration of $HClO_4$.

• Journal of Environmental Science International
• /
• v.13 no.7
• /
• pp.661-665
• /
• 2004

As the concentration of ammonium nitrogen could be reached 2～3 mg/L in the winter in the river. It was clear that the excessive concentration of chlorinated organics could be produced with the increase of chlorine addition to remove ammonium nitrogen. In the innovative ammonium nitrogen removal process, zeolite adsorption is very efficient as substitute for rapid sand filtration without other adverse quality change in the water. This study is conducted to evaluate the feasibility of ammonium nitrogen removal and regeneration by zeolite adsorption in drinking water treatment. Also, the reuse possibility of zeolite is evaluated to change the removal efficiency of ammonium nitrogen through several times of regeneration. The ammonium nitrogen was not removed in sand filter, but it was almost removed in zeolite filter during 7 days. The sand and zeolite filters have a similar result of turbidity removal. Therefore, zeolite filtration was confirmed the removal of turbidity and ammonium nitrogen as a media. When compared KCl with NaCl as a chemical for zeolite regeneration, it is demonstrated that KCl was more efficient than NaCl in the ability of zeolite regeneration. The adsorption rate of ammonium nitrogen was almost not decreased in the results of several times of regeneration. It is indicated that both zeolite and regeneration solution were possible to reuse without variation of regeneration rate through this study.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.435-442
• /
• 2000

Batch test and column test were performed to develop the design factors for permeable reactive barriers(PRBs) against ammonium and heavy metals, Clinoptilolite, a kind of natural zeolites having excellent cation exchange capacity(CEC), was choosen for the reacting materials through the ion-exchange mechanism. In the batch test, the reactivity of clinoptilolite for ammonium, lead, and copper was examined varying the initial concentration of contaminants(ammonium: 20, 40, 80 ppm, heavy metals: 10, 20, 40 ppm) and the particle size of clinoptilolites(0-0.15, 0.42-0.85, 1-1.25 mm). The reactivity is increasing as the initial concentration decrease and particle size decrease. In the column test, the permeability and the reactivity of the specimens were examined using flexible-wall permeameter. Specimens were made of clinoptilolite and Jumunjin-sand with 20 : 80 weight ratio varying particle size of clinoptilolite. The maximum permeability(1${\times}$10$\^$-4/-5${\times}$10$\^$-5/cm/s) was achieved in the specimen made of 0.42-0.85 mm clinoptilolite and sand.

• Analytical Science and Technology
• /
• v.12 no.6
• /
• pp.521-527
• /
• 1999

In this study, capillary columns for ion chromatography were developed to analyze trace amount of ions in samples. When small I.D. capillary columns are used in ion chromatography, the typical flow rate of the mobile phase is $5{\sim}15{\mu}L/min$ and the typical column length is 50~150 mm. The capillary columns were made using RSL-300 fused silica capillary(I.D.: 0.53 mm, O.D.: 0.67 mm) and AG14 column resin(support : polystyrene-divinylbenzene, functional group : alkyl quaternary ammonium). The new conductivity cell and suppressor were also developed and made for capillary column ion chromatography. When several anions (fluoride, nitrite, nitrate, chlorate) were analyzed using these capillary columns, reproducible and good chromatograms were obtained.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.7
• /
• pp.730-737
• /
• 2010

It is very important to remove fluoride ion before treating semiconductor wastewater containing high concentration of ammonia, phosphates, and fluoride ions by struvite formation. Calcium ion was generally added for the removal of fluoride ion. However, calcium ions remained after removal of fluoride ion can deteriorate the performance of struvite crystalization. It should be removed completely before struvite formation. In this study, the effect of fluoride and calcium ion concentration on the struvite crystalization was investigated. Removal efficiencies of ortho-phosphate with struvite formation were more abruptly decreased than those of ammonium nitrogen, as increase of fluoride ion concentration in synthetic wastewater. The structures of struvite formed in synthetic wastewater containing calcium ion of up to 500 mg/L were identical. Purity of struvite was deteriorated as increase of calcium ion over 500 mg/L. Removal efficiencies of ammonium nitrogen were more decreased than those of phosphate ions as increase of cacium ion in synthetic wastewater.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.1
• /
• pp.75-80
• /
• 2003

The structures and complexation energies of penta-O-alkylated 1b and penta-O-tert-butyl ester 1e of p-tert-butylcalix[5]arene and their simplified structures (2b and 2e) toward a series of alkyl ammonium guests have been calculated by a semi-empirical AM1 method. For AM1 calculations, complexation efficiencies of the simplified host 2e are very similar to the values of host 1e. The complexes of simplified host 2e with alkyl ammonium ions also have been optimized by ab initio HF/6-31G method. The calculated complexation efficiencies for 2e by ab initio method have been found to be bigger in magnitude than the values obtained by AM1 calculations for linear alkyl ammonium guests. Calculation results show that all of the calix[5]aryl derivatives investigated in this study have much better complexation ability toward ammonium cation without alkyl group compared with other alkyl ammonium guests. Ab initio calculations also well duplicate the molecular discriminating behaviors of calix[5]arene derivative 2e between butyl ammonium ions: $n-BuNH_3^+\;>\;iso-BuNH_3^+\;>\;sec-BuNH_3^+\;>\;tert-BuNH_3^+$.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.E1
• /
• pp.23-35
• /
• 2005

Size distribution of particulate water-soluble ion components was measured at Gosan, Korea using a micro-orifice uniform deposit impactor (MOUDI). Sulfate, ammonium, and nitrate showed peaks in three size ranges; Sulfate and ammonium were of dominant species measured in the fine mode ($D_{p} < 1.8 {\mu}m$). One peak was observed in the condensation mode ($0.218\sim0.532{\mu}m$), and the other peak was obtained in the droplet mode ($0.532\sim1.8{\mu}m$). Considering the fact that the equivalent ratios of ammonium to sulfate ranged from 0.5 to 1.0 in these size ranges, it is inferred that they formed sufficiently neutralized compounds such as ($NH_{4})_{2}SO_{4} and (NH_{4})_{3}H(SO_{4})_{2}$ during the long-range transport of anthropogenic pollutants. On the other hand, nitrate was distributed mainly in the coarse mode ($3.1\sim6.2{\mu}m$) combined with soil and sea salt. Two sets of MOUDI samples were collected in each season. One sample was collected when the concentrations of criteria air pollutants were relatively high, but the other represented relatively clean air quality. The concentrations of sulfate and ammonium particles in droplet mode were the highest in winter and the lowest in summer. When the air quality was bad, the increase of nitrate was observed in the condensation mode ($0.218\sim0.282{\mu}m$). It thus suggests that the nitrate particles were produced through gas phase reaction of nitric acid with ammonia. Chloride depletion was remarkably high in summer due to the high temperature and relative humidity.

• Analytical Science and Technology
• /
• v.8 no.1
• /
• pp.33-40
• /
• 1995

Only trace amounts of hydroxide ion can be extracted from aqueous phase into organic phase by Tetra-n-Butyl Ammonium Chloride(TBAC). Addition of small amounts of primary alcohols, particularly certain dials, dramatically changes the behavior of Phase Transfer Catalysis systems, and surprising amounts of base can be found in the organic phase. Quantitative measurements were carried out for the extraction amounts of primary alkoxides, secondary alkoxides, and diol anions into organic phase. On the other hand, the selectivity constants for extraction of primary alcohols and benzylalcohol could be separated to the equilibrium constants of the ion pairs such as $Q^+RO^-$ and $Q^+Cl^-$ in the aqueous and organic phases and this distribution coefficients between phases on anions respectively. In a word, the colligated property for the selectivity of $Q^+RO^-$ in which $Q^+$ is quaternary cation and $RO^-$ alkoxide ion could be discussed in more detail by using of the corresponding free energies to the various constants mentioned.