• 한국물환경학회지
• /
• 제25권1호
• /
• pp.18-25
• /
• 2009

Nitrogen removal and methane production from piggery wastewater were investigated in two-phase anaerobic digestion (TPAD) coupled with biological nitrogen removal (BNR) process at $35^{\circ}C$. Methane production rate was about $0.7L/L{\cdot}day$ at organic loading rate (OLR) of $1.2g{\cdot}TCOD/L{\cdot}day$ in methanogenic UASB. Conversion efficiency of the removed TCOD into methane in UASB was as high as 72% and overall TCOD removal efficiency in this system was over 97%. Ammonia nitrogen were stably removed in BNR system and overall efficiency were 98%. With recirculation of the nitrified final effluent to TPAD, nitrogen oxides were completely removed by anaerobic denitrification in the acidogenic reactor, which did not inhibit the acidogenic activities. Overall TN removal efficiency in the TPAD-BNR system was as high as 94%.

• 청정기술
• /
• 제7권4호
• /
• pp.273-280
• /
• 2001

흡수기는 흡수식 열펌프 시스템에서 중요한 구성요소일 뿐만 아니라 흡수기의 성능은 전체 시스템에 중요한 영향을 미친다. 본 연구에서는 기포분사형 흡수기에서의 암모니아기체의 흡수열의 효과적 제거를 위한 냉각수 방향으로의 열전달에 대해 실험적 연구를 수행하였다. 흡수기에 유입되는 암모니아 기체의 유속, 암모니아 수용액의 유속, 농도, 온도, 흡수기의 지름, 높이, 기체와 용액의 유입 방향등 여러 가지 변수에 대하여 열전달 성능의 특성을 살펴본 결과, 기체의 주입량, 용액의 주입량 증가는 열전달 성능 향상에 기여하며, 용액의 온도나 농도의 상승은 열전달 성능에 방해요소로 작용하였으며 흐름방향이 향류인 경우 열전달 성능에 향상이 있었다. 본 실험의 데이터를 이용하여 상관관계식을 유도하여 열전달에 대한 복잡한 관계를 일반화 하였다.

• International Journal of Advanced Culture Technology
• /
• 제10권3호
• /
• pp.295-306
• /
• 2022

The NOx removal performance of the SCR process depends on various factors such as catalytic factors (catalyst composition, shape, space velocity, etc.), temperature and flow rate distribution of the exhaust gas. Among them, the uniformity of the flow flowing into the catalyst bed plays the most important role. In this study, the flow characteristics in the SCR reactor in the design stage were simulated using a three-dimensional numerical analysis technique to confirm the uniformity of the airflow. Due to the limitation of the installation space, the shape of the inlet duct was compared with the two types of inlet duct shape because there were many curved sections of the inlet duct and the duct size margin was not large. The effect of inlet duct shape, guide vane or mixer installation, and venturi shape change on SCR reactor internal flow, airflow uniformity, and space utilization rate of ammonia concentration were studied. It was found that the uniformity of the airflow reaching the catalyst layer was greatly improved when an inlet duct with a shape that could suppress drift was applied and guide vanes were installed in the curved part of the inlet duct to properly distribute the process gas. In addition, the space utilization rate was greatly improved when the duct at the rear of the nozzle was applied as a venturi type rather than a mixer for uniform distribution of ammonia gas.

• 한국축산시설환경학회지
• /
• 제14권2호
• /
• pp.91-96
• /
• 2008

The odours from spreading the slurry, manure storage tanks, and the stall are a source of annoyance for the neighbors and sometimes even become a case for civil appeal. Reducing the odourant and ammonia emission is an urgent need to be addressed. It is known that brown coal and oak charcoal have an ability to absorb odour. We designed an experiment set in lab scale and used the brown coal and oak charcoal as additives in the test to reduce odour. The test are divided into two categories; namely aeration and no-aeration. The additives were added to the each sample at a concentration of 5% and 10% of total base solids, besides the control samples. We carried out the Phenate Method for ammonia analyzing. In the non-aerated case, the results showed a reducing efficiency of 23.7% and 26.4% with an addition rate of 5% and 10% of additives, respectively. In the aerated test, the reducing efficiency of ammonia was 17.8% and 21.0% with an addition rate of 5% and 10% of additives, respectively. In case of oak charcoal, non-aeration showed removal efficiencies of ammonia at 15.9% and 16.1% with addition rates of 5% and 10%, respectively, With aeration, they were 11.4% and 26.4% with addition rates of 5% and 10% oak charcoal, respectively. The tests show that brown coal and oak charcoal have a reducing effect on ammonia emissions.

• 폴리머
• /
• 제31권6호
• /
• pp.479-484
• /
• 2007

본 연구는 점착제 분사방식으로 고성능 hybrid ion exchange fiber(HIEF)를 제조하고 이들의 암모니아 흡착성능 및 기본물성을 측정하였다. HIEF의 이온교환용량은 수지 부착량이 증가함에 따라 증가하였으며 단일 수지와 이온교환섬유의 이온교환용량보다 크게 나타났다. 또한 암모니아의 제거율은 HIEF의 충전밀도가 증가할수록 증가하였으며 흡착 파과시간은 270분으로 섬유나 수지에 비해 길게 나타났고 최대 암모니아 흡착량은 94%이었다. 또한 암모니아 흡착 파과시간은 유량 및 농도가 증가함에 따라 빠르게 진행되었다. 암모니아 반응속도 상수(k)는 유입되는 가스농도의 증가에 따라 증가하였으며, 질량이 증가할수록 감소하였으며 가스 유속이 증가할수록 반응속도 상수(k)가 증가하였다.

• 한국환경과학회지
• /
• 제15권5호
• /
• pp.439-446
• /
• 2006

The effluent discharge standards of industrial wastewater has become more stringent since 2003. Many industrial wastewater treatment plants has been upgraded to advanced treatment facilities. There are high concentrations of nitrate(>200 mg/L) and ammonium(>50 mg/L) nitrogen in the acrylic fiber wastewater of H textile Co. Wastewater from acrylic fiber industry containing acrylonitrile, which may affect the subsequent biological treatment process. Manufacturing of acrylic fiber also produces shock loadings. Excessive acrylonitrile and polymer debris produced in the polymerization process was screened, coagulated with CaO and settled down. A preaeration system was added to treat this high pH effluent to remove volatile organic compound and ammonia nitrogen by the air stripping effect. it was found that nitrification rate was not sufficient in the Anoxic/Oxic(AO) process. One denitrification tank was converted to nitrification reactor to extend HRT of nitrification. Nitrification rate of ammonia nitrogen was promoted from 32% to 67% by this modification and effluent nitrogen concentration was well satisfied with the effluent standards since then.

• 한국환경과학회지
• /
• 제8권4호
• /
• pp.443-449
• /
• 1999

This paper describe the working of algal culture system under batch and continuous feeding effluents in biological treatment process. The main objective of this study was the determination of fundamental opeating parameters such as dilution rates, light intensity, biomass concentration, nutrients contents, which engender an effective nutrient and organic waste removal process. The results of this research indicate that the algae system will remove effectively nutrient and organic waste. In batch cultures, 91.8% dissolved orthophosphate and 83.3% ammonia nitrogen were removed from the sewage in ten days. In continuous flow systems, a detention time of 2.5 days was found adequate to remove 91% T-P, 87% T-N and 95% $NH_3-N$. At 22-28$^{\circ}C$, 60 rpm, with an intensity of 3500 Lux, the specific growth rate, k was 0.59/day in batch experiments. The optimal growth temperature and nutrients rate (N/P) were respectively $25^{\circ}C$ and 3~5. With an abundant supply of untrients, it was possible to sustain substantial population densities in the temperature range of 22~28$^{\circ}C$.

• 한국광물학회지
• /
• 제29권3호
• /
• pp.113-122
• /
• 2016

산화대 금 광석에 존재하는 적철석을 암모니아 용액을 이용하여 제거하여 금과 은의 회수율을 향상시키고자 하였다. 산화대에는 석영, 적철석, 백운모가 존재하고 있으며, 적철석은 수성기원으로 형성되었다. 다양한 변수에 대하여 암모니아 용출실험을 수행한 결과, Fe 최대 용출 인자는 $-45{\mu}m$ 입도 크기, 1.0 M의 황산 농도, 5.0 g/l의 황산암모늄 농도 그리고 2.0 M의 과산화수소 농도일 때였다. 이 암모니아 용출용액으로부터 침철석이 침전-형성되는 것을 확인하였으며, 고체-잔류물에서 Fe-제거량이 증가할수록 Au와 Ag 회수율이 증가하였다.

• 한국입자에어로졸학회지
• /
• 제7권3호
• /
• pp.87-97
• /
• 2011

In this study, we organized the test results obtained from the performance tests for the CA certificated air cleaners which had been commercially available in Korea since 2003, and analyzed the correlation among the test parameters such as flow rate, particle collection efficiency, clean air delivery rate (CADR), ozone emission, odor removal efficiency and noise level etc. The noise level of 267 air cleaners were increased as concentrated at the 45, 50, 55 dB, which are the required noise level for CA certification according to flow rate, and ozone emissions from the CA air cleaners were significantly lower than the requirement limit, 50 ppb for 24 hour operation. The average particle collection efficiency and odor removal efficiency were 89.3 and 80.8%, approximately 20% higher than the requirement of CA certification, regardless of flow rates. The particle removal performance of an air cleaner was clearly discriminated by its CADR, and the CADR was obtained with a simple calculation: 0.79 x flow rate. The low differentiation of gas removal performance of air cleaners by the current CA gas test method was improved by 3.2, 751.3, 13.4 times for ammonia, acetic acid, respectively, by adopting the CADR concept and the real time measurement method, FTIR, for gas removal performance test.

• 한국토양비료학회지
• /
• 제39권2호
• /
• pp.73-79
• /
• 2006

돈분뇨 중의 악취 성분을 제거하는 동시에 퇴비의 C/N 비를 적정 수준으로 유지하기 위한 방안으로서 축산농가에 보급을 목적으로 pilot 장치를 제작하여 돈분뇨를 호기성 액비화 처리하기 이전에 암모니아 탈기공정 실험을 수행하였다. 암모니아 탈기를 위한 pH 조정을 $Ca(OH)_2$를 이용하였으며, NaOH에 비해 훨씬 현장 적용성이 용이한 것으로 파악되었다. 암모니아 탈기공정의 적정 pH를 도출하기 위해 각각 pH를 9.3, 10.9, 12.3 으로 조절하여 탈기실험을 수행한 결과 pH가 가장 높은 12.3에서 가장 우수한 것으로 나타났고, 이때 반응온도는 $35^{\circ}C$이었다. 암모니아 탈기공정이 진행되는 동안 유리암모니아 질소의 가스상 암모니아로의 전환을 통해 발생되는 방출속도는 탈기공정 초기에는 $0.5355mole\;s^{-1}$ 이었고 탈기공정 후기에는 $0.0253mole\;s^{-1}$ 로 나타나, 주로 탈기공정 초기에 많은 양의 암모니아 가스가 방출되는 것을 알 수 있었다. 탈기공정중 C/N비 변화는 초기 돈분뇨 원수가 4.5이었고 탈기공정 초기에 6.3으로 증가한 이후에 점진적으로 증가하였다. 적정한 탈기를 위한 최적의 탈기시간은 TN과 TC의 회귀 곡선을 통해 C/N비가 6.5 부근인 약 48시간이 적합한 것으로 결론지었다. 탈기를 통해 돈분뇨 중의 암모니아성 질소성분은 79.6% 저감되었으며, 흡수액을 통해 배출된 암모니아가스의 81.3%를 제거하였다.