• The Journal of Advanced Prosthodontics
• /
• v.7 no.6
• /
• pp.496-505
• /
• 2015

PURPOSE. To determine the effect of fibronectin (FN)-conjugated, microgrooved titanium (Ti) on osteoblast differentiation and gene expression in human bone marrow-derived mesenchymal stem cells (MSCs). MATERIALS AND METHODS. Photolithography was used to fabricate the microgrooved Ti, and amine functionalization (silanization) was used to immobilize fibronectin on the titanium surfaces. Osteoblast differentiation and osteoblast marker gene expression were analyzed by means of alkaline phosphatase activity assay, extracellular calcium deposition assay, and quantitative real-time PCR. RESULTS. The conjugation of fibronectin on Ti significantly increased osteoblast differentiation in MSCs compared with non-conjugated Ti substrates. On the extracellular calcium deposition assays of MSCs at 21 days, an approximately two-fold increase in calcium concentration was observed on the etched 60-${\mu}m$-wide/10-${\mu}m$-deep microgrooved surface with fibronectin (E60/10FN) compared with the same surface without fibronectin (E60/10), and a more than four-fold increase in calcium concentration was observed on E60/10FN compared with the non-etched control (NE0) and etched control (E0) surfaces. Through a series of analyses to determine the expression of osteoblast marker genes, a significant increase in all the marker genes except type I collagen ${\alpha}1$ mRNA was seen with E60/10FN more than with any of the other groups, as compared with NE0. CONCLUSION. The FN-conjugated, microgrooved Ti substrate can provide an effective surface to promote osteoblast differentiation and osteoblast marker gene expression in MSCs.

• Journal of the Korean Chemical Society
• /
• v.17 no.4
• /
• pp.262-268
• /
• 1973

p-Phenylenediamine was tetrazotized with sodium nitrite in an excess amount of concentrated hydrochloric acid media at -10$^{\circ}$C. It was also tetrazotized almost completely in 45% perchloric acid media. The two diazo groups in the tetrazonium salt were substituted by halogen, and the degree of tetrazotization reaction was observed by dihalobenzene yielded. The result of the tetrazotization was dependent upon the stability of the tetrazonium salt, and the stability was determined by concentration and quantity of the acid media. In dilute acid media the tetrazonium salt was unstable and completely decomposed. In concentrated acid media, though the tetrazonium salt was stable, tetrazotization reaction was retarded. To harmonize the two opposing tendencies it was advisable to find the optimum acidity of media at which the salt was fairly stable. About $40{\sim}45$% of the acid media was suitable. The fact that the $H^+$ ion behaved as a negative catalyst supported the assumption that the diazotization reaction is primarily a reaction between the free amine and a nitroso group. The reaction of tetrazotization is expressed with respect to the kinetics and mechanism of diazotization.

• Journal of the Korean Chemical Society
• /
• v.37 no.4
• /
• pp.453-461
• /
• 1993

Detection method was developed using a simply designed photochemical reactor made of teflon coil and low pressure mercury lamp. This method of UV photolysis of analytes followed by UV, fluorescence and electrochemical detection was found to be useful for four thiocarbamates. Analytes eluting from the column are irradiated with a high flux of 254 nm UV light, so that they change to either fluorescent active forms or highly electrochemically sensitive products. Appling this technique to the UV detection, thiocarbamates were converted into long wavelength absorbing products upon UV irradiation. In fluorescence detector four thiocarbamates are not detected at nonirradiated condition but fluorescence signals of MPTC, CPTC photolysates are appeared after irradiation with UV light. The electrochemical detection for the determination of thiocarbamates was enhanced up to 5∼20 fold signal after UV irradiation, compared to that of the nonirradiated. The detection limit of thiocarbamates on electrochemical detector was 13.3∼0.02 ng under pH 7.0, ionic strength $0.5{\times}10^{-2}$ M, phosphate buffer solution. Adducts produced by reaction of photolysates and OPA-MERC in the reaction coil were monitored at 425 nm with fluorescence detector, and one of the photolysates was primary amine.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.223-228
• /
• 2012

Temperature and pH sensitive graft copolymers [Pluronic-$g$-poly(NIPAAm-$co$-MMA), Polymer A] and [Pluronic-$g$-poly( NIPAAm-$co$-MAA), Polymer C] were synthesized by macro radical graft polymerization with $N$-isopropylacrylamide (NIPAAM)/$N,N$-diethylaminoethylmethacrylate (DEAEMA) and $N$-isopropylacrylamide (NIPAAm)/methacrylic acid (MAA) based on Pluronic, respectively. The chemical structure and molecular weight of the graft copolymers was characterized by $^1H$ NMR and gel permeation chromatography. The aqueous solution properties of graft copolymers were measured using a UV-visible spectrophotometer, contact angle and dynamic light scattering equipment with different temperature and pH conditions. The obtained graft copolymers showed a very sensitive phase transition in response to temperature and pH in aqueous media which suggested that the amine group of DEAEMA segment and carboxylic group of MAA had a great influence on the lower critical solution temperatures (LCST) in Polymer A and C, respectively. The graft copolymers can be utilized for drug delivery system and molecular switching applications where responses to temperature and pH changes are relevant.

• Plant Journal
• /
• v.9 no.3
• /
• pp.38-42
• /
• 2013

Submarine gas fields have focused because of the increasing fuel cost, the environmental regulations, and the safety & NIMBY problems. LNG-FPSO which is available for acid gas removal, recovery of the condensate & LPG and Liquefaction in topside process is one of high technology offshore structures. On the other hands, it is necessary to verify the pre-treatment efficiency by the ship motion and to apply to the design for LNG-FPSO. This study is to develop the pre-treatment technology for LNG-FPSO as taking account to the process efficiency by ship motion effects and the area optimization. Based on the simulation results, it founds that hybrid process shows the low circulate rate, the low heat duty and the small size of column dimensions compared to typical amine process. It will be verified the process efficiency in the various conditions by sea states as performing the 6-DOF motion test and CFD simulation.

• Archives of Pharmacal Research
• /
• v.21 no.4
• /
• pp.465-469
• /
• 1998

The search for platinum (II)-based compounds with improved therapeutic properties was prompted to design and synthesize a new family of water-soluble, third generation cis-diaminedichloroplatinum (II) complexes linked to uracil and uridine. Six heretofore unreported uracil and uridine-platinum (II) complexes are; [N-(uracil-5-yl-methyl)ethane-1,2-di-amine]dichloroplatinum (II) (3a), [N-(uracil-6-yl-methyl)ethane-1,2-diaminel dichloroplatinum (II) (3b), t[N-($2^1$, $3^1$,$5^1$-tri-O-acetyl)uridine-5-yl-methyl] ethane-1,2-diamineldichloroplatinum (II) (6a), {[N-($2^1$,$3^1$, $5^1$-tri-O-acetyl) uridine-6-yl-methyl]ethane-1,2-diamine)dichloroplatinum (II) (6b),[N-(uridine- 5-yl-methyl)ethane-1,2-diamine]dichloroplatinum (II) (7a), [N-(uridine-6-yl- methyl)ethane-1,2-diamine]dichloroplatinum (II) (7b). These analogues were prepared from the key starting materials, 5-chloromethyluracil (1a) and 6-chloromethyluracil (1b) which were reacted with ethylenediamine to afford the respective 5-[(2-aminoethyl)aminol methyluracil (2a) and 6-[(2-aminoethyl)amino]methyluracil (2b). The cis-platin complexes 3a and 3b were obtained through the reaction of the respective 2a and 2b with potassium tetrachloroplatinate (II). The heterocyclic nucleic acid bases 1a and 1b were efficiently introduced on the .betha.-D-ribose ring via a Vorbruggen-type nucleoside coupling procedure with hexamethyldisilazane, trimethylchlorosilane and stannic chloride under anhydrous acetonitrile to yield the stereospecific .betha.-anomeric 5-chloromethyl- $2^1$,$3^1$,$5^1$-tri-O-acetyluridine (4a) and 6-chloromethyl-$2^1$,$3^1$,$5^1$-tri-O-acetyluridine (4b), respectively. The nucleosides 4a and 4b were coupled with ethylenediamine to provide the respective 5-[(amino-ethyl)aminolmethyl-$2^1$,$3^1$,$5^1$-tri-O-acetyluridine (5a) and 6-[(aminoethyl)amino] methyl-$2^1$,$3^1$,$5^1$-tri-O-acetyluridine (5b). The diamino-uridines 5a and 5b were reacted with potassium tetrachloroplatinate (II) to give the novel nucleoside complexes, 6a and 6b, respectively which were deacetylated into the free nucleosides, 7a and 7b by the treatment with CH$_{3}$ONa. The cytotoxic activities were evaluated against three cell lines (FM-3A, P-388 and J-82) and none of the synthesized compounds showed any significant activity.

• Korean Journal of Food Science and Technology
• /
• v.20 no.2
• /
• pp.125-132
• /
• 1988

Gulbis were made of raw Pseudosciaena manchurica by different salting methods and drying conditions. During the Gulbi processing, the contents of trimethylamine(TMA), dimethylamine(DMA) and formaldehyde(FA) were chemically analyzed and the distribution of fat was microscopically observed. The contents of TMA, DMA and FA in raw sample were 0.9mg, 3.19mg and 0.19mg per 100g, respectively. The TMA contents in Gulbi were rapidly increased to 24.82-76.32mg during drying, while the DMA contents in Gulbi were slowly increased and FA contents in Gulbi remained nearly unchanged. These changes were not influenced by the kinds of salt and salting methods. The formation rates of TMA and DMA were twice faster dried by the controlled condition than the natural condition. The fat in muscle moved to the skin layer through connective tissue with the laps of drying time. The extent of fat shifting was smaller salted by purified salt than by bay salt. The muscle tissue of Gulbi dried by the controlled condition had clearer spaces between white muscles than that of the natural condition. The muscle tissue of Gulbi salted with purified salt exsisted orderly, while the sample salted with bay salt was clumped.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.258-263
• /
• 2007

Ammonia water was investigated as a new absorbent of the chemical absorption process for the removal of $CO_2$ in flue gas. The suitable range of ammonia water concentration and $CO_2$ loading ($mol\;CO_2/mol\;NH_3$) were decided in the point of view of $CO_2$ absorption capacity and $NH_4HCO_3$ precipitation. The absorption capacity of $CO_2$ and the precipitation of $NH_4HCO_3$ in liquid phase were calculated by the Pitzer model for electrolyte solution. The $CO_2$ absorption capacity of the ammonia water over $5\;molNH_3/kgH_2O$ was higher than that of conventional amine absorbent. The $CO_2$ loadings where precipitation occurred were decided at various absorbent concentrations. Theses values were higher than 0.5 in the concentration range of $5-14\;molNH_3/kgH_2O$ at 293, 313 K. The absorber for the removal of $CO_2$ in flue gas could be operated without $NH_4HCO_3$ precipitation by using high concentration of ammonia water below these $CO_2$ loading values. The optimum temperature of the ammonia water absorbent for removal of $CO_2$ in flue gas was 297-312 K depending on the concentration of ammonia water.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.200-205
• /
• 2016

A drug transport carrier could be used for safe send of drugs to the affected region in a human body. The chitosan is adequate for the drug delivery carrier because of adaptable to living body. The gold, a metallic nanoparticles, tends to form a nano complex at rapidly when it combined with chitosan because of its negative charge. having energy from the other, outer gold nano-complex make heat due to its property to release the contained drugs to the target area. Silver could be also formed an useful biocompatible nano-composites with chitosan which should be used as an useful drug transfer carrier because its special ability to protect microbial contamination. Being one of the oxidized nano metals, $Fe_3O_4$ is nontoxic and has been used for its magnetic characteristics. In this study, the control of catalyst, reducing agent, and solvent amount. The chitosan-$Fe_3O_4$-gold & silver nanoshell have been changed to form about 100 nm size by ionic bond between the amine group, an end group of chitosan, and the metal. It was observed the change in order to seek for its optimum reaction condition as a drug transfer carrier.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.187-199
• /
• 2016

In this study CALPUFF modeling was performed to predict a contribution of a separate single point pollutant source as well as of total point pollutant sources of major synthetic fiber manufacturers in Gumi national industrial complex to atmospheric trimethylamine concentration of the same area. In addition, a contribution of the separate single point pollution source to the atmospheric trimethylamine concentration of the same area was estimated relatively to the total point pollutant sources. As a result of the CALPUFF modeling, the maximum atmospheric concentration of trimethylamine in Gumi national industrial complex was appeared upon improving T company emission facility frequently in complex 3 in winter (January) and spring (April) while frequently in complex 1 in summer (July) and autumn (October). Besides, the predicted range of the maximum atmospheric concentration of trimethylamine in complex 1 was improved upon improving its emission facility. However, even though in complex 3 the upper bound of the predicted maximum atmospheric concentrations of trimethylamine was increased upon improving T company emission facility, the predicted value of their second upper bound below the upper bound was very similar to the upper bound of measured atmospheric trimethylamine concentrations in Gumi prior to improving its emission facility. Thus, the effect of improving T company emission facility was estimated huge in complex 1 while it was trivial in complex 3. These maximum concentrations of trimethylamine predicted to estimate the expected contribution of total point pollutant sources by CALPUFF modeling showed the similar values to those measured in the region of Gumi. Therefore, the expected contribution of total point pollutant sources to atmospheric trimethylamine concentration in the area of Gumi was validated.