• Clean Technology
• /
• v.15 no.3
• /
• pp.154-164
• /
• 2009

In 2007, 94% of organic wastewater sludge from industries located in Ulsan was disposed of by ocean dump. The ocean dump of organic sludge would be totally prohibited by the year of 2012. However, there is no alternative but incinerating the sludge from the industries located in Ulsan. Securing the technology for sludge treatment and on-land disposal is very important issue among the industries in the Ulsan Petrochemical Industry Complex. In this study, the material aspects of dried and carbonized sludge as a fuel were evaluated for petrochemical and sewage sludge from Ulsan. The dried and carbonized sludges from the factories producing terephthalic acid, BTX, propylene, chemical textile, etc. of which the low heat value exceeded 3,000 kcal/kg had high potential as a fuel according to the results of thermal characteristic analysis. However, the dried sludges with heat values lower than 2,100 kcal/kg and carbonized sludges, lower than 1,100 kcal/kg containing more Inorganic material from the industries producing pulp, paper, methylamine, amide, etc. had a little potential to be used as a fuel. In most cases, drying the sludge showed better results than carbonization in the aspect of thermal characteristics of sludge.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.1
• /
• pp.1-7
• /
• 2023

Chlorine dioxide (ClO₂) is widely used for post-harvest sterilization treatment. However, there are limitations in the retail application of ClO₂ due to difficulties in handling, expensive facilities, and safety concerns. Therefore, it is necessary to develop a ClO₂ technology that can be easily applied and continuously released for a long period. In this study, a series of ClO₂ self-releasing sachets were developed. First, poly(ether-block-amide) (PEBAX) and polyethylene-glycol (PEG) composite films containing different ratios of citric acid (CA) were prepared using the solution casting method. The as-prepared PEBAX/PEG-CA composite films were evaluated using FT-IR, DSC, and TGA to confirm chemical structure and thermal properties. Subsequently, PEBAX/PEG-CA composite films were designed in the form of a sachet and NaClO₂ powder was transferred into the sachet to achieve a ClO₂ self-releasing system. The ClO₂-releasing behavior of the sachet was investigated by measuring the release amount of the gas using UV-vis. The release amount of ClO₂ increased with increasing CA contents owing to the existence of higher protons (trigger) in the polymer matrix. Further, ClO₂ gas was released for a longer time. Therefore, the as-prepared smart sachet can be tuned according to applications and packaging sizes to serve an optimal sterilization effect.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.27 no.2
• /
• pp.111-127
• /
• 2023

Purpose: Gallium-68 (⁶⁸Ga) is increasingly used in nuclear medicine imaging for various conditions such as lymphoma and neuroendocrine tumors by labeling tracers like Prostate Specific Membrane Antigen (PSMA) and DOTA-TOC. However, compared to Fluorine-18 (¹⁸F) used in conventional nuclear medicine imaging, ⁶⁸Ga has lower spatial resolution and relatively higher Signal to Background Ratio (SBR). Therefore, this study aimed to investigate the optimized parameters and reconstruction methods for PET/CT imaging using the ⁶⁸Ga radiotracer through model-based image evaluation. Materials and Methods: Based on clinical images of ⁶⁸Ga-PSMA PET/CT, a NEMA/IEC 2008 PET phantom model was prepared with a Hot vs Background (H/B) ratio of 10:1. Images were acquired for 9 minutes in list mode using DMIDR (GE, Milwaukee WI, USA). Subsequently, reconstructions were performed for 1 to 8 minutes using OS-EM (Ordered Subset Expectation Maximization) + TOF (Time of Flight) + Sharp IR (VPFX-S), and BSREM (Block Sequential Regularized Expectation Maximization) + TOF + Sharp IR (QCFX-S-400), followed by comparative evaluation. Based on the previous experimental results, images were reconstructed for BSREM + TOF + Sharp IR / 2 minutes (QCFX-S-2min) with varying β-strength values from 100 to 700. The image quality was evaluated using AMIDE (freeware, Ver.1.0.1) and Advanced Workstation (GE, USA). Results: Images reconstructed with QCFX-S-400 showed relatively higher values for SNR (Signal to Noise Ratio), CNR (Contrast to Noise Ratio), count, RC (Recovery Coefficient), and SUV (Standardized Uptake Value) compared to VPFX-S. SNR, CNR, and SUV exhibited the highest values at 2 minutes/bed acquisition time. RC showed the highest values for a 10 mm sphere at 2 minutes/bed acquisition time. For small spheres of 10 mm and 13 mm, an inverse relationship between β-strength increase and count was observed. SNR and CNR peaked at β-strength 400 and then decreased, while SUV and RC exhibited a normal distribution based on sphere size for β-strength values of 400 and above. Conclusion: Based on the experiments, PET/CT imaging using the ⁶⁸Ga radiotracer yielded the most favorable quantitative and qualitative results with a 2 minutes/bed acquisition time and BSREM reconstruction, particularly when applying β-strength 400. The application of BSREM can enhance accurate quantification and image quality in ⁶⁸Ga PET/CT imaging, and an optimization process tailored to each institution's imaging objectives appears necessary.

• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.4
• /
• pp.325-333
• /
• 1992

An investigation was carried out to find out the effects of long-term application (14 and 28 years) of rice straw, compost and wheat straw on changes in soil chemical and physical properities, aspests of releasing potential nitrogen and nitrogen uptake by rice and maize from fine textured paddy soils with double cropping system in warm temperate area. The result obtained were summarized as follows : 1. The long-term application of organic matters improved plow layer and soil physical properties : bulk density and solid phase were decreased, while porosity and gaseous phase were decreased. 2. Average increment of total carbon per year was 0.0371% and 0.0407% for rice straw and compost, respectively, from 1 through 14 years ; it was 0.0007% and 0.0014% for the rice straw and compost, respectively, from 15 years through 28 years. The average increment of total notrogen per year was 0.0025% and 0.038% for the rice straw and compost, respectively, from 1 through 14 years ; 0.0014% and 0.0024% for the same treatments from 15 through 28 years. 3. $NH_4-N$ and amide-N were high in the soils with wheat straw application for 28 years ; the amino sugar-N in the soils with compost application for 28 years ; amino acid -N in the soils with rice straw application for 14 and 28 years ; and unidentified-N, in the control. 4. The released amount of available nitrogen with the submerged condition was higher at $30^{\circ}C$ than at $25^{\circ}C$ during the incubation. The amount of released available nitrogen at the field was aproximately same as that of $25^{\circ}C$ incubation. However, the released amounts from the incubation and the field were always lower than those extracted with reagents. 5. The amount of nitrogen uptake by rice and maize was highly correlated with available nitrogen extracted with phosphate buffer(pH 7.0). 6. The ratio of yield increase(milled rice) was 17, 12 and 7%, respectively, by application of rice straw, compost and wheat straw for 28 years, and 11% by application of rice straw for 14 years.

• Applied Biological Chemistry
• /
• v.48 no.1
• /
• pp.1-15
• /
• 2005

Pathogens, insects and weeds have significantly reduced agricultural productivity. Thus, to increase the productivity, synthetic agricultural chemicals have been overused. However, these synthetic compounds that are different from natural products cannot be broken down easily in natural systems, causing the destruction of soil quality and agricultural environments and the gradually difficulty in continuous agriculture. Now agriculture is faced with the various problems of minimizing the damage in agricultural environments, securing the safety of human health, while simultaneously increasing agricultural productivity. Meanwhile, plants produce secondary metabolites to protect themselves from external invaders and to secure their region for survival. Plants infected with pathogens produce antibiotics phytoalexin; monocotyledonous plants produce flavonoids and diterpenoids phytoalexins, and dicotylodoneous plant, despite of infected pathogens, produce family-specific phytoalexin such as flavonoids in Leguminosae, indole derivatives in Cruciferae, sesquitepenoids in Solanaceae, coumarins in Umbelliferae, making the plant resistant to specific pathogen. Growth inhibitor or antifeedant substances to insects are terpenoids pyrethrin, azadirachtin, limonin, cedrelanoid, toosendanin and fraxinellone/dictamnine, and terpenoid-alkaloid mixed compounds sesquiterpene pyridine and norditerpenoids, and azepine-, amide-, loline-, stemofoline-, pyrrolizidine-alkaloids and so on. Also plants produces the substances to inhibit other plant growths to secure the regions for plant itself, which is including terpenoids essential oil and sesquiterpene lactone, and additionally, benzoxazinoids, glucosinolate, quassinoid, cyanogenic glycoside, saponin, sorgolennone, juglone and lots of other different of secondary metabolites. Hence, phytoalexin, an antibiotic compound produced by plants infected with pathogens, can be employed for pathogen control. Terpenoids and alkaloids inhibiting insect growth can be utilized for insect control. Allelochemicals, a compound released from a certain plant to hinder the growth of other plants for their survival, can be also used directly as a herbicides for weed control as well. Therefore, the use of the natural secondary metabolites for pest control might be one of the alternatives for environmentally friendly agriculture. However, the natural substances are destroyed easily causing low the pest-control efficacy, and also there is the limitation to producing the substances using plant cell. In the future, effects should be made to try to find the secondary metabolites with good pest-control effect and no harmful to human health. Also the biosynthetic pathways of secondary metabolites have to be elucidated continuously, and the metabolic engineering should be applied to improve transgenics having the resistance to specific pest.

• The Korean Journal of Pesticide Science
• /
• v.3 no.3
• /
• pp.11-19
• /
• 1999

A some of synthesized 2-(4-(6-chloro-2-benzoxazolyloxy)phenoxy)-N-phenyl propionamide derivativesa substrates were found to selectivity significantly with both rice plant (Oryza sativa L.) and barnyard grass (Echinochloa crus-galli) for those her- bicidal activities with post emergence in up land. The selectivity of substrates against rice plant better than that of Fenoxaprop-ethyl. The structure activity relationship (SAR) n the selectivity of N-phenyl substituents were analyzed by the Free-Wilson and Hansch method. The SAR approach against barnyard grass is shown that the optimal ($({\pi})_{opt.}=1.60$) hydrophobicity and electron donating effects ($0<{\sigma}$ & 0$(ES)_{opt.}=0.87$) so that the herbicidal activity against rice plant can be decreased. The significance of these results on the selectivity between barnyard grass and rice plant is discussed. And it is assumed that the 2-ethoxy-3-methoxy-4-dimethylamino group substituent ($pI_{50}$=6.60, 1g/ha) is selected as the most highest herbicidal activity against barngard grass in green house.

• Journal of Periodontal and Implant Science
• /
• v.33 no.1
• /
• pp.27-35
• /
• 2003

1. 목적 생체재료의 생체친화성을 증진시키고 치유를 촉진하기 위한 목적으로 생체재료의 생화학적 표면개질에 관한 연구가 널리 진행되고 있다. 이와 같은 목적으로 이용되어 온 부착분자에는 아미노산, 펩타이드, 단백질, 효소 및 성장인자들을 들 수 있으며, 이들 분자들을 금속, 골대체물질 및 폴리머와 같은 생체재료의 표면개질에 이용하여 왔다. 이 연구의 목적은 생체적합성이 우수하고 생분해성을 지닌 키토산으로 얇은 막을 제작한 후, 세포외 기질의 구성성분 중 세포부착에 관여하는 RGD 펩타이드를 부착시킨, 표면개질 키토산막의 생물학적 영향을 MG-63 조골양세포를 이용하여 관찰하는 것이다. 2. 방법 2% acetic acid에 키토산 가루를 녹여 만든 2% 키토산 용액으로 24-well 배양접시의 표면을 도포 후 24시간 동안 건조시켜 키토산막을 제작하였다. GRGDS 펩타이드를 cross-linker(EDC, NHS) (Sigma, MO, USA) 용액과 반응시켜서 펩타이드의 카르복실기를 활성화시켰다. 이들을 PBS 완충용액으로 수화시킨 키토산막과 결합시켜 펩타이드의 활성화된 카르복실기와 키토산의 아민기 간에 안정적인 아미드 결합(amide bond)이 형성되도록 하였다. 하루 동안 반응을 일으킨 후 PBS 완충용액과 증류수로 씻어내고 냉동 건조시킴으로써 GRGDS가 결합된 키토산막을 제작하였다. 재료 표면의 화학 성분을 알아보는데 사용되는 방법의 일종인 X-ray photoelectron spectroscopy(XPS) 분석을 통하여 부착분자가 키토산막에 결합된 여부를 확인하였다. GRGDS 펩타이드에 요오드를 결합시킨 후, 이것을 키토산막에 공유 결합시키고 XPS를 통해 요오드가 재료 표면에서 검출되는지를 검사하였다. 요오드가 검출된다면 이것은 키토산막 표면에 실제로 GRGDS 펩타이드가 존재하는 것을 의미하게 된다. 표면개질된 키토산막에 사람조골양세포인 MG-63을 접종하여 이를 실험군으로 하였고, 표면이 개질 되지 않은 키토산막을 대조군으로 하였다. 세포부착의 최적화 농도를 확인하기 위하여 GRGDS를 0.01, 0.05, 0.1, 0.25, 0.5, 1.0mg/ml의 농도로 준비하였다. 배양 후 1일, 7일째에 각 well에서 trypsin EDTA를 이용하여 세포를 분리한 후, 이를 원심 분리하여 세포수측정기를 이용하여 부착 세포의 수를 측정하여 세포의 부착 정도를 비교하였다. 배양 2시간, 24시간 후 주사전자현미경을 이용하여 키토산막에 부착된 세포의 양상을 관찰하였다. 3. 결과 XPS를 통한 표면의 화학 성분 분석 결과 GRGDS 펩타이드를 결합시킨 키토산막에서 요오드가 검출되었으며 펩타이드를 부착하지 않은 대조군에서는 검출되지 않았다. 따라서 cross-linker를 이용한 펩타이드와 키토산막의 공유결합을 확인할 수 있었다. 세포 배양 후 1일째 부착된 세포 수를 측정한 결과 0.1mg/ml 이상의 GRGDS 펩타이드 농도로 공유 결합시킨 키토산막에서 부착 세포 수가 다른 농도에 비해 유의성 있게 많이 관찰되었다. 이 농도 이하에서는 대조군과 실험군간에 세포부착의 유의한 차이가 없었다. 따라서 주사전자현미경을 이용한 부착 세포의 양상에 관한 관찰은 0.1mg/ml 농도의 펩타이드를 이용하였다. 세포 배양 7일째, 부착된 세포 수 측정 결과 GRGDS의 농도에 따른 유의성 있는 차이가 없었으며, 실험군과 대조군간에도 유의성 있는 차이가 없었다. 주사전자현미경 관찰결과 2시간 및 24시간 배양된 실험군 모두에서 별모양의 세포들이 키토산막 표면에 편평하게 잘 부착되어 있으며 많은 위족이 발달된 소견을 보인 반면, 대조군에서는 원형 또는 다각형 모양의 세포들이 실험군에 비해 부착이 덜 되어있는 양상을 보였다. 이 연구를 통하여 기능성 펩타이드를 생체재료의 표면에 공유결합 시키는 방법을 확립할 수 있었으며, RGD 펩타이드의 공유결합으로 표면개질된 키토산막이 조골세포의 부착능을 증진시킬 수 있음을 확인하였다. 표면개질된 생체재료를 소, 중동물에 적용시켜 생체 내에서의 생물학적 영향을 평가할 필요가 있으며, 이 실험의 결과는 향후 다양한 기능성 부착분자를 선발, 고안하여 임플란트용 생체재료의 표면개질에 이용하는 이른바 모방생체재료분야에 널리 활용될 수 있을 것으로 생각된다.

• Nuclear Medicine and Molecular Imaging
• /
• v.43 no.1
• /
• pp.60-71
• /
• 2009

Purpose: We assessed the absorbed dose to the tumor ($Dose_{tumor}$) by using pretreatment FDG-PET and whole-body (WB) planar images in repeated radioimmunotherapy (RIT) with $^{131}I$ rituximab for NHL. Materials and Methods: Patients with NHL (n=4) were administered a therapeutic dose of $^{131}I$ rituximab. Serial WB planar images alter RIT were acquired and overlaid to the coronal maximum intensity projection (MIP) PET image before RIT. On registered MIP PET and WB planar images, 2D-ROls were drawn on the region of tumor (n=7) and left medial thigh as background, and $Dose_{tumor}$ was calculated. The correlation between $Dose_{tumor}$ and the CT-based tumor volume change alter RIT was analyzed. The differences of $Dose_{tumor}$ and the tumor volume change according to the number of RIT were also assessed. Results: The values of absorbed dose were $397.7{\pm}646.2cGy$ ($53.0{\sim}2853.0cGy$). The values of CT-based tumor volume were $11.3{\pm}9.1\;cc$ ($2.9{\sim}34.2cc$), and the % changes of tumor volume before and alter RIT were $-29.8{\pm}44.3%$ ($-100.0%{\sim}+42.5%$), respectively. $Dose_{tumor}$ and the tumor volume change did not show the linear relationship (p>0.05). $Dose_{tumor}$ and the tumor volume change did not correlate with the number of repeated administration (p>0.05). Conclusion: We could determine the position and contour of viable tumor by MIP PET image. And, registration of PET and gamma camera images was possible to estimate the quantitative values of absorbed dose to tumor.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.1
• /
• pp.3-8
• /
• 2009

Purpose: Onco flash shortens a scan time with half and there is a possibility of getting the data which corresponds in existing. The experiment which makes the image whose Onco Flash is excellent OSEM tried, as changes parameter of time, iteration. After reconstituting an image, produces FWHM and executes an evaluation. Materials and Methods: Siemens e.cam gamma camera, standard Jaszczak phantom and spatial resolution phantom was used. In order for the bubble not to enter, implants 2 mCi and volume 0.25 cc $^{99m}Tc$ respectively in line 3 to spatial resolution phantom. Put on that phantom on the table correctly, and acquires an image. 15 mCi putting in distilled water to mix $^{99m}Tc$ well in Jaszczak phantom and acquires image just like spatial resolution phantom. Reconstructs and converts the image to digital image as Sante program. Produce FWHM and evaluate by Amide. Results: The non-scattered image shows better FWHM value than scattered image. As time increases from 10 sec to 30 sec for 5sec interval, FWHM appeared to 30.1, 28.5, 24.5, 23.6, 23.4 mm. At the standard iteration value 4, OSEM FWHM shows 8.0 mm, and Onco Flash is 8.1 mm. As fade in iteration, FWHM value more and more decreased. Conclusion: When using Onco Flash, shortens a scan time, and enhances image quality. Also, user can adjust the parameters to improve resolution. Therefore, patient and user are satisfied with these merits.

• Applied Biological Chemistry
• /
• v.18 no.4
• /
• pp.194-202
• /
• 1975

This study was conducted to study the properties of the water-soluble natural chelating agents from garbage compost and activated sewage sludge responsible for Fe chelation, which is closely associated with the effectiveness in correcting iron chlorosis in plant. The water-soluble fraction of these materials was fractionated by menas of Sephadex gel filtration and the fractions of Fe chehates were traced by radioactive $^{59}Fe$. The fractions were examined by ultraviolet and infrared. spectroscopy and stability constants for Fe. The water-soluble fraction from garbage compost was separated by Sephadex G-25 into approximately four fractions. Most of the added $^{59}Fe$ was associated with fraction I, which appeared at the void volume. Further fractionation by Sephadex G-50 indicated that the molecular weight of water-soluble chelating agents is in the approximate range of 5000 to 10,000. The water-soluble fraction from activated sewage sludge gave six fractions by Sephadex G-25. Most of the added $^{59}Fe$ was found in the fraction I,II, and III, The molecular weights of most chelating agents associated with $^{59}Fe$ appeared to be less than 5,000 and those of fraction I that appeared at the void volume was in the range of 5,000 to 1,000. Discrepancy between radio activity count and UV absorption indicated the heterogeneity of the fractions obtained by Sephadex gel filtration. Ultraviolet absorption spectra of all fractions separated by Sephadex G-25 and containing chelating agents showed no differences. Fraction IV and V of sewage extract showed absorption maxima and shifting similar to nucleic acid components suggesting the presence of decomposition products of nucleic acid. Similarity fraction VI contained phenolic type amino acid groups. Fraction I of compost extract contained most of the added $^{59}Fe$ and showed weak but extra definite absorption in the 1230, and $1270cm^{-1}$ region, suggesting that extra oxygen groups in polyphenolic structure were probably involved in Fe chelation. In sewage extract, fraction I,II, and III in which most of the $^{59}Fe$ was found, showed strong definite polypeptide absorption in the region of $1540cm^{-1}$ due to NH deformation and C-N stretching of amide groups in the peptidebond. These extra functional groups in fraction I, II, and III appeared to be associated with Fe chelation. The other fractions, not associated with $^{59}Fe$, still have carboxyl and hydroxyl groups, suggesting that these functional groups in these water extracts may not independently form the Fe chelates. Precipitation of ferric hydroxide precluded measuring the stability constants for Fe-chelates. However, the formation constants for Zn chelates as log K values for compost extract and sewage extract at pH 4.0 from which the strength of chelation with Fe could be presumed, were 8.23, and 9.75, respectively, indicating strong complexation with metals. The chelating capacity of compost extract containing 6.5 g organic matter per liter was 0.82 mM, and that of sewage extract containing 5.3 g per liter was 0. 64 mM.