• 공업화학
• /
• 제18권6호
• /
• pp.630-635
• /
• 2007

구조중에 1개의 tert-부틸기를 가진 새로운 형태의 키랄살렌 착체를 합성하여 비대칭반응 촉매로서 활용하였다. 알루미늄족의 금속염을 소유한 이량체형의 키랄 살렌 촉매는 에폭사이드의 산소고리를 페놀류로 여는 비대칭반응에서 매우 높은 활성과 선택성을 나타내었다. 또한 무기담체에 고정화된 살렌 착체도 이 반응에 대하여 효과적인 촉매로 사용할 수 있었다. 새로운 키랄 살렌촉매 중에 존재하는 금속염의 종류는 광학선택적 반응에서 중요한 영향을 나타내었다.

• Bulletin of the Korean Chemical Society
• /
• 제35권10호
• /
• pp.2917-2921
• /
• 2014

Cerium-activated yttrium aluminate ($Y_3Al_5O_{12}:Ce^{3+}$) exhibiting a garnet structure has been widely utilized in the production of light emitting diodes (LEDs) as a yellow emitting phosphor. The commercialized yttrium aluminum garnet (YAG) phosphor is typically synthesized by a solid-state reaction, which produces irregular shape particles with a size of several tens of micrometers by using the top-down method. To control the shape and size of particles, which had been the primary disadvantage of top-down synthetic methods, we synthesized YAG:Ce nanoparticles with a diameter of 500 nm using a coprecipitation method under the atmospheric pressure without the use of template or special equipment. The precursor particles were formed by refluxing an aqueous solution of the nitrate salts of Y, Al, and Ce, urea, and polyvinylpyrrolidone (55 K) at $100^{\circ}C$ for 12 h. YAG:Ce nanoparticles were formed by the calcination of precursor particles at $1100^{\circ}C$ for 10 h under atmospheric conditions. The phase identification, microstructure, and photoluminescent properties of the products were evaluated by X-ray powder diffraction, scanning electron microscopy, absorption spectrum and photoluminescence analyses.

• Corrosion Science and Technology
• /
• 제19권1호
• /
• pp.8-15
• /
• 2020

In this paper, the efficiency and the inhibition mechanisms of cobalt salts (cobalt nitrate and cobalt-exchange silica Co/Si) for the corrosion protection of AA2024 were investigated in a neutral aqueous solution by using the electrochemical impedance spectroscopy (EIS) and polarization curves. The experimental measurements suggest that cobalt cation plays a role as a cathodic inhibitor. The efficiency of cobalt cation was important at the concentration range from 0.001 to 0.01 M. The formation of precipitates of oxides/hydroxides of cobalt on the surface at low inhibitor concentration was confirmed by the Scanning Electron Microscopy/Energy Dispersive X-Ray Spectroscopy (SEM/EDS) analysis. EIS measurements were also conducted for the AA2024 surface covered by water-based epoxy coating comprising Co/Si salt. The results obtained from exposure in the electrolyte demonstrated the improvement of the barrier and inhibition properties of the coating exposed in the electrolyte solution for a lengthy time. The SEM/EDS analysis in artificial scribes of the coating after salt spray testing revealed the release of cobalt cations in the coating defect to induce the barrier layer on the exposed AA2024 substrate.

• Journal of Pharmaceutical Investigation
• /
• 제29권3호
• /
• pp.171-177
• /
• 1999

Lidocaine(2-Diethylaminoaceto-2', 6'-xylidide) was transdennally delivered by iontophoresis and the effect of enhancer on the delivery of lidocaine was studied. We delivered lidocaine through the skin of hairless mouse using diffusion cell and investigated the effect of the amount of cation salts such as sodium chloride, calcium acetate, zinc acetate and aluminum acetate on the drug delivery. The amounts of transported drugs and adsorbed metal ions were measured by HPLC(High Perfonnance Liquid Chromatography) and AAS(Atomic Absorption Spectrophotometry), respectively. The addition of zinc acetate and aluminum acetate greatly enhanced the delivery of lidocaine. The detection of two metal ions by AAS seemed to support the idea that the astringency effect of these ions were the main reason for the enhancement of transdermal delivery.

• 한국식품영양과학회지
• /
• 제41권1호
• /
• pp.129-135
• /
• 2012

시중 유통 소금 55건은 유형별로는 천일염 22건, 가공소금 17건, 재제소금 16건이었으며, 국산 33건, 수입 22건이었다. 수입국으로는 프랑스를 비롯하여 미국, 일본, 호주, 뉴질랜드, 아르헨티나였다. 식용소금 55건을 ICP-OES 및 Mercury analyzer를 이용하여 납, 카드뮴, 크롬, 구리, 비소, 니켈, 알루미늄, 코발트, 수은을 분석한 결과 평균 $0.281{\pm}0.344$, $0.035{\pm}0.221$, $0.364{\pm}0.635$, $0.182{\pm}0.313$, $0.046{\pm}0.062$, $0.155{\pm}0.247$, $5.753{\pm}10.746$, $0.028{\pm}0.211$, $0.001{\pm}0.001$ mg/kg이 검출되었다. 납의 검출량은 천일염에서 가공소금, 재제소금보다 유의적인 수준으로 높았으며, 크롬과 니켈은 가공소금에서 다른 소금에 비해 유의적으로 높았다. 알루미늄은 수입산 천일염과 가공소금에서 시료 간 큰 차이를 나타냈으며, 검출량이 높은 제품은 프랑스산으로 지역적인 영향이 큰 것으로 판단된다. 소금의 섭취 시 중금속에 대한 안전성을 평가하기 위해 소금을 통한 중금속의 주간섭취량과 FAO/WHO에서 제시하는 잠정주간섭취허용량(PTWI), 1인 1일 최대섭취허용량(PMTDI)과 미국 환경보호청(U.S. EPA)의 만성경구섭취 참고용량(RfD)과 비교하여 %PTWI를 구하였다. 금속별 주간섭취량은 납, 카드뮴, 크롬, 구리, 수은 각각 평균 0.413(0.000~1.688), 0.026(0.000~0.505), 0.667 (0.000~5.519), 0.265(0.022~1.720), 0.002(0.000~0.005), ${\mu}g/kg$ bw/week이었으며, %PTWI는 납, 카드뮴, 크롬, 구리, 수은이 각각 1.652(0.000~6.754), 0.372(0.000~7.214), 3.177(0.000~26.279), 0.008(0.001~0.049), 0.031(0.000~0.094)%로 소금을 통한 중금속 섭취량은 안전한 수준으로 판단되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.295-298
• /
• 1998

We have investigated ionic conductivity and electrochemical stability of the electrolytes containing organic solvent. Ion conductivities were measured between 10 and 80$^{\circ}C$, and electrochemical stabilities were determined by cyclic voltammetry on glassy carbon, platinum and aluminum electrodes. Ionic conductivity of electrolyte(EC:DEC=1:1) with IM LiPF$\_$6/ shows better than that of the other electrolytes having Li salts. The IM LiBF$_4$-PC electrolyte exhibits good electrochemical stability. IM LiPF$\_$6/ (EC:DEC=1:1) and IM LiPF$\_$6/ (EC:DMC=1:1) electrolytes are used for the high capacity of battery system.

• 환경위생공학
• /
• 제17권3호
• /
• pp.89-98
• /
• 2002

The changes of conventional clarification process and an increase in treatment cost are required to meet increasingly stringent regulations related to the treated water quality. Although many enhanced coagulations have introduced to improve organic matter removal, the results to remove color, nitrogen and phosphorus as well as organic material have not been very efficient yet. The removal of waste matters such as SS, organic matter, color and turbidity contained in dyeing wastewater was carried out by using the combination of calcium hydroxide and magnesium sulfate. The flocculation was investigated as a function of coagulant dose, pH, mixing time, settling time and coagulant addition modes such as the sequential addition of the two coagulants and the simultaneous addition of them. The flocculation by the combination of calcium hydroxide and magnesium sulfate was compared with that by aluminum sulfate. The mechanism of flocculation was investigated as well. About 84% of color in dyeing watewater was removed by flocculation with combination of calcium hydroxide and magnesium sulfate.

• 환경위생공학
• /
• 제17권4호
• /
• pp.10-18
• /
• 2002

The changes of conventional clarification processe and an increase in treatment cost are required to meet increasingly stringent regulations related to the treated water quality. Although many enhanced coagulations have introduced to improve organic matter removal, the results to remove color, nitrogen and phosphorus as well as organic material have not been very efficient yet. In this context as new flocculation using calcium hydroxide and magnesum sulfate was carried out. The removal of waste matters such as SS, organic matter, COD, nitrogen and phosphorus contained in stock wastewater was carried out by using the combination of calcium hydroxide and magnesium sulfate. The flocculation was investigated as a function of coagulant dose, pH, mixing time, settling time and coagulant addition modes such as the sequential addition of the two coagulants and the simultaneous addition of them. The flocculation by the combination of calcium hydroxide and magnesium sulfate was compared with that by aluminum sulfate. The mechanism of flocculation was investigated as well. About 60% of COD in stock watewater was removed by flocculation with combination of calcium hydroxide and magnesium sulfate.

• 한국환경과학회지
• /
• 제12권9호
• /
• pp.1017-1023
• /
• 2003

The high speed elimination process of suspended solid was investigated to treat the pulp waste water by using surface modified magnetite particle and magnetic power. The effects of the various aluminum salts such as Al(NO$_3$)$_3$ㆍ9$H_2O$, AlC1$_3$ㆍ6$H_2O$, $Al_2$(SO$_4$)$_3$ㆍ13∼14 on the COD, BOD and suspended solid were systematically studied. It has been found that the 2.0 wt% of Al was most effective for the modification of Fe$_3$O$_4$ powder and then best for the treatment of pulp waste water, Optimum quantity of modified magnetite in this study was 12 wt%, and aging time was found to be 12 hours. Comparing with the conventional process, the required time for SS removal was drastically decreased. BOB and COD were also effectively removed when applied to the pulp wastewater.

• 한국염색가공학회지
• /
• 제12권6호
• /
• pp.396-403
• /
• 2000

The purpose of this study was to investigate the dyeing properties of silk, wool, nylon and poly(ethylene teraphtlate)〔PET〕 fabrics dyed with Tumeric(Curcuma longa) extracts. The dyeing property and color fastness were investigated by using the extracts and the post mordanting with Aluminum, Copper and Iron salts. In the UV-visible spectra, the maximum absorption of wavelength of the extract with methyl alcohol appeared at 420nm, and that of the extract with distilled water was at 415nm. Increasing the dyeing temperature, the K/S values of dyed fabrics were increased. The optimum dyeing condition was 30∼60 minute of dyeing time at pH 5∼5.6. Surface colors of silk and wool became dark by using mordants compared to those of nylon and PET fabrics. The drycleaning fastness of fabrics dyed with the extracts was good. The laundering and light fastness were improved by using mordants.