• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.440-441
• /
• 2007

For this study, terbium-doped yttrium aluminum garnet (YAG:Tb) phosphor powders were prepared via the combustion process using the varous reagents. The characteristics of the synthesized nano powder were investigated by means of X-ray diffraction (XRD), Scanning Electron Microscope(SEM), and photoluminescence (PL). Single-phase cubic YAG:Tb crystalline powder was obtained at $1000^{\circ}C$ by directly crystallizing it from amorphous materials, as determined by XRD techniques. The SEM image showed that the resulting YAG:Tb powders had uniform sizes and good homogeneity. The photoluminescence spectra of the YAG:Tb nanoparticles were investigated to determinethe energy level of electron transition related to luminescence processes. There were three peaks in the excited spectrum, and the major one was a broad band of around 274 nm. Also, the YAG:Tb nanoparticles showed two emission peaks in the range of 450~500 nm and 525~560 nm, respectively, and had maximum intensity at 545 nm.

• Journal of Environmental Health Sciences
• /
• v.39 no.1
• /
• pp.48-55
• /
• 2013

Objective: The use of nanoparticle products is expected to present a potential harmful effect on consumers. Also, the lack of information regarding inhaled nanoparticles may pose a serious problem. In this study, we addressed this issue by studying pulmonary toxicity after nasal instillation of Al-NPs in SD rats. Methods: The animals were exposed to Al-NPs at 1 mg/kg body weight (low dose), 20 mg/kg body weight (medium dose) and 40 mg/kg body weight (high dose). To determine pulmonary toxicity, bronchoalveolar lavage (ts.AnBAL) fluid analysis and histopathological examination were conducted in rats. In addition, cell viability was investigated at 24 hours after the treatment with Al-NPs. Results: BAL fluid analysis showed that total cells (TC) count and total protein (TP) concentrations increased significantly in all treatment groups, approximately two to three times. Also, lactate dehydrogenase (LDH) and cytokines such as TNF-alpha and IL-6 dose-dependently increased following nasal instillation of Al-NPs. However, polymorphonuclear leukocytes (PMNs) levels showed no significant changes in a dose dependant manner in BAL fluid. In the cytotoxicity analysis, the treatment of Al-NPs significantly and dose-dependently induced cell viability loss (20 to 30%) and damage of cell membrane (5 to 10%) in rat normal lung epithelial cells (L2). Conclusions: Our results suggest that inhaled Al-NPs in the lungs may be removed quickly by alveolar macrophages with minimal inflammatory reaction, but Al-NPs have the potential to affect lung permeability. Therefore, extensive toxicity evaluations of Al-NPs are required prior to their practical application as consumer products.

• Toxicological Research
• /
• v.32 no.4
• /
• pp.311-316
• /
• 2016

Effects of nanoparticles (NPs) on skin corrosion and irritation using three-dimensional human skin models were investigated based on the test guidelines of Organization for Economic Co-operation and Development (OECD TG431 and TG439). EpiDerm$^{TM}$ skin was incubated with NPs including those harboring iron (FeNPs), aluminum oxide (AlNPs), titanium oxide (TNPs), and silver (AgNPs) for a defined time according to the test guidelines. Cell viabilities of EpiDerm$^{TM}$ skins were measured by the 3-(4, 5-dimethylthiazol-2-yl)-2.5-diphenyltetrazolium bromide based method. FeNPs, AlNPs, TNPs, and AgNPs were non-corrosive because the viability was more than 50% after 3 min exposure and more than 15% after 60 min exposure, which are the non-corrosive criteria. All NPs were also non-irritants, based on viability exceeding 50% after 60 min exposure and 42 hr post-incubation. Release of interleukin 1-alpha and histopathological analysis supported the cell viability results. These findings suggest that FeNPs, AlNPs, TNPs, and AgNPs are 'non-corrosive' and 'non-irritant' to human skin by a globally harmonized classification system.

• Journal of Environmental Health Sciences
• /
• v.42 no.1
• /
• pp.27-33
• /
• 2016

Objectives: Alumina nanoparticles ($Al_2O_3$, Al-NPs) are used for various purposes, including as coating agents and paint additives. Their potential toxicity has raised concern for human health. This study focuses on exploring the toxic effects on the brain and kidneys caused by Al-NPs exposure in rats. Methods: The animals were orally administered Al-NPs at 10, 50 and 100 mg/kg body weight for 28 days following OECD TG 407. To determine the targeted toxicity of Al-NPs, histopathological examination and gene expression analysis were conducted on the rats. Results: The Al-NPs treatment induced kidney tubular dilatation. In the rat cerebrums, the expression levels of 126 genes experienced two-fold or greater increases in response to Al-NPs, including other genes encoding proteins involved in cell differentiation, transcription and signal transduction. In the rat kidneys, the expression levels of 152 genes also showed two-fold or greater increases in response to Al-NPs, including other genes encoding proteins involved in apoptosis, transcription and signal transduction. Conclusion: These results suggest that exposure to Al-NPs influences cellular signal pathways of kidney and cerebrum, and it can be a toxic indicators of nanometrials.

• Clinical and Experimental Vaccine Research
• /
• v.12 no.1
• /
• pp.32-46
• /
• 2023

Purpose: The present study aimed to compare the immune-enhancing potential of gold nanoparticles (AuNPs) to Alum against rabies vaccine and the related immunological, physiological, and histopathological effects. Materials and Methods: Alum and AuNPs sole and in combination with rabies vaccine were used at 0.35 mg/mL and 40 nM/mL, respectively. Rats used were categorized into six groups (20/each): control rats, rabies vaccine, aluminum phosphate gel, rabies vaccine adsorbed to Alum, AuNPs, and rabies vaccine adjuvant AuNPs. Results: Liver and kidney functions were in the normal range after AuNPs and Alum adjuvanted vaccine compared to control. Interleukin-6 and interferon-γ levels were significantly increased in groups immunized with Alum and AuNPs adjuvanted vaccine, the peak level was in the case of AuNP adjuvanted vaccine on the 14th day. Ninety days post-vaccination, total immunoglobulin G (IgG) against adjuvanted rabies vaccine showed a significantly elevated antirabies IgG with AuNPs and Alum adsorbed vaccine compared with unadjuvanted one. The total antioxidant capacity, malondialdehyde (MDA) levels, superoxide dismutase, and glutathione peroxidase activities were significantly increased post-adjuvanted AuNPs adjuvanted vaccine vaccination than in Alum adsorbed vaccine, while MDA was significantly decreased. The histopathological examination revealed detectable alterations post-AuNPs and Alum adjuvanted vaccine immunization compared with liver and kidney profiles post-administration of unadjuvanted and non-immunized groups, meanwhile, splenic tissue revealed hyperplasia of lymphoid follicles indicating increased immune reactivity. Conclusion: The AuNPs are promising enhancers of the immune response as Alum, and the undesirable effects of AuNPs could be managed by using suitable sizes, shapes, and concentrations.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1232-1233
• /
• 2008

딥 코팅 공정을 통하여 콜로이드 $Fe_2O_3$ 나노입자의 단일층을 다공성의 AAO (Anodic Aluminum Oxide) 기판에 형성하였다. 나노입자의 평균 사이즈는 20 nm이고, 각각의 나노입자는 올레익 산(oleic acid) 으로 둘러싸여 옥탄(octane) 용액 안에 분산되어있다. AAO 기판은 알루미늄에 높은 균일성과 고밀도의 기공(pore) 형성을 위해 두 단계 양극산화공정을 통해 제작하였다. AAO 기공의 지름은 ${\sim}$30에서 100 nm 이고, 딥 코팅 공정의 속도는 0.1 mm/sec 로 하여 AAO의 나노기공 안에 나노입자의 단일층을 성공적으로 형성시켰다.

• Advances in nano research
• /
• v.16 no.4
• /
• pp.365-374
• /
• 2024

This study delves into the significant impact of integrating nanomaterials, specifically carbon and graphene nanoparticles, into the polymer matrix of aluminum alloy 356, utilizing the vortex casting technique, with the aim of improving the mechanical properties of table tennis equipment. Athletes and their coaching teams have long been on a quest for high-performance sports gear, recognizing its pivotal role in unlocking the full potential of players. The dedication of engineers to craft designs, select materials with precision, and uphold stringent testing standards reflects the commitment to meeting the demands of the sporting world. Yet, to remain at the forefront, sports engineering must continually align with contemporary technologies, and nanotechnology has emerged as a transformative force in this regard. This study not only underscores the meticulous efforts in material integration but also highlights the remarkable strides made possible by nanotechnology. Aluminum nanocomposites, particularly, showcase a groundbreaking fusion of exceptional strength and reduced weight, marking a notable achievement in sports equipment innovation. The research outcomes are compelling, revealing a substantial enhancement in the mechanical performance of the sports structures under scrutiny. This promising development hints at a potential paradigm shift in the manufacturing of sports equipment, promising a new era of elevated athlete performance and enhanced safety during the rigors of physical education training. This study stands as a testament to the tangible impact of nanotechnology on the ever-evolving landscape of sports equipment.

• Journal of Power System Engineering
• /
• v.17 no.1
• /
• pp.110-115
• /
• 2013

The electrochemical performance and microstructure of Al-Si, Al-Si/C was investigated as anode for lithium ion battery. The Al-Si nano composite with 5 : 1 at% ratio was prepared by arc-discharge nano powder process. However, some of problem is occurred, when Al nano composite was synthesized by this manufacturing. The oxidation film is generated around Al-Si particles for passivating processing in the manufacture. The oxidation film interrupts electrical chemistry reaction during lithium ion insertion/extraction for charge and discharge. Because of the existence the oxidation film, Al-Si first cycle capacity is very lower than other examples. Therefore, carbon synthsized by glucose ($C_6H_{12}O_6$) was conducted to remove the oxidation film covered on the composite. The results showed that the first discharge cycle capacity of Al-Si/C is improved to 113mAh/g comparing with Al-Si (18.6mAh/g). Furthermore, XRD data and TEM images indicate that $Al_4C_3$ crystalline exist in Al-Si/C composite. In addition the Si-Al anode material, in which silicon is more contained was tested by same method as above, it was investigated to check the anode capacity and morphology properties in accordance with changing content of silicon, Si-Al anode has much higher initial discharge capacity(about 500mAh/g) than anode materials based on Aluminum as well as the morphology properties is also very different with the anode based Aluminum.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 2000.06a
• /
• pp.143-150
• /
• 2000

Wet-chemical process using ammonia to precipitate aluminum ion dissolved in a zirconia sol solution is examined. Formation of crystalline bayerite is unfavorable for fine dispersion of zirconia nanoparticles in alumina matrix after heat treatment. To avoid the bayerite formation, it was preferred to make a precipitation with a diluted ammonia or with an ammonia gas flow at high temperature. By optimizing the precipitation process and the calcination temperature, we successfully prepared the uniform microstructure in which tetragonal zirconia particles of ∼30nm is finely dispersed within the alumina grains.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.4
• /
• pp.758-760
• /
• 2008

Nanoporous AAO (Anodic Aluminum Oxide) membranes have many advantages as a template for variety of magnetic materials. Materials can be embedded into the pores by electrodeposition, sputtering or magnetic-field-assisted infiltration of magnetic nanoparticles. This work focuses on the fabrication of the magnetic structures in the AAO templates by electrodeposition. Our method allows the controlled growth of Co nanostructures within the porous alumina membrane in the form of dots, rods and long wires. The shape of Co nanostructures has been investigated by field emission scanning electron microscope (FESEM). The magnetic hysteresis loops of Co nanostructures were measured using SQUID at 5 K and 300 K. The magnetic properties of the Co nanostructures are proportional to their aspect ratios and can be controlled by changing the aspect ratios.