• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.1
• /
• pp.1-6
• /
• 2013

Ultrasonic guided wave techniques have been widely used for long range nondestructive detection in tube-like structures. The present paper investigates the ultrasonic linear and nonlinear parameters for evaluating the thermal damage in aluminum pipe. Specimens were subjected to thermal loading. Flexible polyvinylidene fluoride (PVDF) comb transducers were used to generate and receive the ultrasonic waves. The second harmonic wave generation technique was used to check the material nonlinearity change after different heat loadings. The conventional linear ultrasonic approach based on attenuation was also used to evaluate the thermal damages in specimens. The results show that the proposed experimental setup is viable to assess the thermal damage in an aluminum pipe. The ultrasonic nonlinear parameter is a promising candidate for the prediction of micro-damages in a tube-like structure.

• Journal of the Korean Ceramic Society
• /
• v.41 no.2
• /
• pp.118-124
• /
• 2004

The properties of AlN made by carbothermal reaction depend on the starting materials, quantity of liquid, the liquid-vapor phase reaction, the N$_2$ flow rate, and the reaction temperature. AlN whisker was synthesized by the VLS and VS methods. Solid ${\alpha}$-A1$_2$O$_3$(AES-11) was carbothermally reduced with carbon black in a high-purity N$_2$ atmosphere with AlF$_3$ to cause whisker grown and additional aluminum liquid to increase whisker yield. Aluminum nitride was perfectly formed at reaction temperatures of 1600$^{\circ}C$. At reaction temperature higher than 1600$^{\circ}C$ the aluminum nitride was completely formed, while the composition remains unaffected. Needle-shaped whiskers formed best at 1600$^{\circ}C$ while higher temperatures disrupted whisker formation. Adding 0 to 15 wt% aluminum to the synthesis favorably affects the microstructure for formation of needle-shaped AlN whisker. Additions over 15 wt% degraded formation of AlN whisker.

• The Korean Journal of Physiology and Pharmacology
• /
• v.17 no.5
• /
• pp.427-433
• /
• 2013

Receptor activator of NF-${\kappa}B$ ligand (RANKL)-induced osteoclastogenesis is accompanied by intracellular $Ca^{2+}$ mobilization in a form of oscillations, which plays essential roles by activating sequentially $Ca^{2+}$/calmodulin-dependent protein kinase, calcineurin and NFATc1, necessary in the osteoclast differentiation. However, it is not known whether $Ca^{2+}$ mobilization which is evoked in RANKL-independent way induces to differentiate into osteoclasts. In present study, we investigated $Ca^{2+}$ mobilization induced by aluminum fluoride ($AlF_4^-$), a G-protein activator, with or without RANKL and the effects of $AlF_4^-$ on the osteoclastogenesis in primary cultured mouse bone marrow-derived macrophages (BMMs). We show here that $AlF_4^-$ induces intracellular $Ca^{2+}$ concentration ($[Ca^{2+}]_i$) oscillations, which is dependent on extracellular $Ca^{2+}$ influx. Notably, co-stimulation of $AlF_4^-$ with RANKL resulted in enhanced NFATc1 expression and formation of tartrate-resistant acid phosphatase (TRAP) positive multinucleated cells. Additionally, we confirmed that mitogen-activated protein kinase (MAPK) is also activated by $AlF_4^-$. Taken together, these results demonstrate that G-protein would be a novel modulator responsible for $[Ca^{2+}]_i$ oscillations and MAPK activation which lead to enhancement of RANKL-mediated osteoclastogenesis.

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.627-631
• /
• 2010

$\alpha$-Alumna particles were prepared by a precipitation method with metal fluoride additive. Aluminum nitrate and ammonia solution were used as starting materials. $AlF_3$, $CaF_2$, and $MnF_2$ were utilized as additives. The effects of precipitation solvent and metal fluoride on the phase transformation temperature, size and morphology of $\alpha$-alumna particles were investigated. The solvent for precipitation did not affect the phase transformation temperature, while it influenced the size of $\alpha$-alumna particles. The phase transformation temperature to $\alpha$-alumna was reduced by addition of metal fluoride and was different with metal cation in metal fluoride ($AlF_3(800^{\circ}C)$ < $MnF_2(900^{\circ}C)$ < $CaF_2(950^{\circ}C)$). The addition of each of three metal fluorides led to the formation of platelike particles and, among the three additives, $MnF_2$ additive resulted in the formation of relatively small particle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.4713-4716
• /
• 2014

Several methods that have been used to manage a degasing process in recent years, such as an injection method that uses aluminum molten metal powder and chemicals, and the input method that supplies argon and nitrogen, or chlorine gas using a gas blow-tube. On the other hand, these methods have some problems, and it is a difficult process to handle pollution due to the production of considerable toxic gases, such as chlorine and fluoride gas, irregular effects, and lowering work efficiency due to the excessive processing time. The problems that are most fatal are the production of considerable sludge due to a reaction of aluminum molten metal with chemicals, loss of metals, and the decreasing life of refractory materials. To solve these problems, this study developed a technology that is related to continuous casting of molten aluminum metal and monolithic degasing apparatus.

• Journal of the Korean Ceramic Society
• /
• v.39 no.3
• /
• pp.315-320
• /
• 2002

Treatment effects of dilute hydrofluoric acid (6 wt% HF) on the surface properties of $Al(OH)_3$ were investigated at the molar ratio of F/Al(fluoride/aluminum)=0.15. Temperature and pH variations in the reaction system were recorded to analyze reaction mechanism between $Al(OH)_3$ and aqueous Hf. The reaction of HF to the surface of $Al(OH)_3$ accompanied with a quantity of heat evolution, resulting in increasing temperature of a reactionsystem. And also the reaction was proceeded as transitional state which metastable ${\alpha}-form\;AlF_3{\cdot}3H_2O$ was transferred to insoluble ${\beta}$-form. The resulting ${\beta}-form\;AlF_3{\cdot}3H_2O$ formed by a surface treatment was identified by FT-IR and X-ray diffractormetry. The formation of ${\beta}$-form aluminum fluoride hydrates with diameter less than $1{\mu}m$ on the surface of $Al(OH)_3$ could be visulaized by SEM imgae, making up a coating layer as precipitate-like. The surface whiteness of $Al(OH)_3$ treated with aqueous HF was furthermore increased approximately 6.6% due to the formation of surface hydrates.

• Current Photovoltaic Research
• /
• v.4 no.1
• /
• pp.12-15
• /
• 2016

Screen printing technique followed by firing has commonly been used as metallization for both laboratory and industrial based solar cells. In the solar cell industry, the firing process is usually conducted in a belt furnace and needs to be optimized for fabricating high efficiency solar cells. The printed-Al layer on the silicon is rapidly heated at over $800^{\circ}C$ which forms a layer of back surface field (BSF) between Si-Al interfaces. The BSF layer forms $p-p^+$ structure on the rear side of cells and lower rear surface recombination velocity (SRV). To have low SRV, deep $p^+$ layer and uniform junction formation are required. In this experiment, firing process was carried out by using conventional tube furnace with $N_2$ gas atmosphere to optimize $V_{oc}$ of laboratory cells. To measure the thickness of BSF layer, selective etching was conducted by using a solution composed of hydrogen fluoride, nitric acid and acetic acid. The $V_{oc}$ and pseudo efficiency were measured by Suns-$V_{oc}$ to compare cell properties with varied firing condition.

• Composites Research
• /
• v.36 no.3
• /
• pp.224-229
• /
• 2023

Due to the increasing demand for wearable devices and miniaturization of various electronic devices, the trend of nanofabrication in IT devices is underway. In order to overcome the limitations of battery size and capacity, there has been a lot of research interest in energy harvesting technology, also known as triboelectric nanogenerator. AAO(Anodic Aluminum oxide) coated with fluoride is a structure that includes an anode layer with high properties in the triboelectric series, an dielectric layer that helps transfer the triboelectrically generated charges to the electrode without loss, and the electrode. For these reasons, AAO has been a lot of research on its application to frictional energy harvesting nanogenerators. In this work, we analyzed the correlation of AAO between the surface morphology and thickness of the insulating layer by utilizing aluminum oxide, which is advantageous for the application of triboelectric nanogenerators, and adjusting the thickness of the insulating layer.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.145-149
• /
• 2004

It is necessary for managing a perfect process for degasing aluminum molten metal according to the increase of a grade of aluminum and its alloy products. There are some methods that have been used to manage a degasing process in recent years, such as an injection method that uses aluminum molten metal powder and chemicals supplier and input method that supplies argon and nitrogen, or chlorine gas by using a gas blow-tube. However, these methods show some problems, and it shows that it is a difficult process to handle. pollution due to the producing a lot of toxic gases like chlorine and fluoride gas. irregular effects, and lowering work efficiency due to the excessive processing time. The problems that are the most fatal are the producing a lot of sludge due to the reaction of aluminum molten metal with chemicals. loss of metals, and decreasing the life of refractory materials. In order to solve these problems. this paper develops a technology that is related to aluminum continuous casting molten metal and monolithic degasing apparatus. A degasing apparatus developed in this study improved the exist ing methods and prevented environmental pollution wi th smokeless. odor less, and harmlessness by using a new method that applies argon and nitrogen gas in which the methods used in the West and Japan are eliminated. The developed method can significantly reduce product faults that are caused by the production of gas and oxidation because it uses a preprocessed molten metal with chemicals. In addition. the amount of the produced sludge can also be reduced by 60-80% maximum compared with the existing methods. Then. it makes it possible to minimize the loss of metals. Moreover. the molten metal processing and settling time is also shortened by comparing it with the existing methods that are applied by using chemicals. In addition, it does much to improve the workers' health, safety and environment because there is no pollution. The improvement of productivity and prevent ion effects of disaster from the results of the development can be summarized as follows. It will contribute to the process rationalization because it does not have any unnecessary processes that the molten metal will be moved to an agitator by using a ladle and returned to process for degasing like the existing process due to the monolithic configuration. There are no floating impurities due to the oxidation caused by the contact with the air as same as the existing process. In addition. it can protect the blending of precipitation impurities. Because it has a monolithic configuration. it can avoid the use of additional energy to compensate the temperature decreasing about 60t that is caused by the moving of molten metal. It is not necessary to invest an extra facilities in order to discharge the gas generated from a degasing process by using an agitator. The working environment can be improved by the hospitable air in the factory because the molten metal is almost not exposed in the interior of the area.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.25-27
• /
• 2003

The device characteristics and the interface electronic structures of organic light-emitting devices based on /tris-(8-hydroxyquinoline)aluminum ($Alq_3$) were investigated with Al/NaF cathode. The Al/NaF cathode greatly improved the performance of the device over the Al-only cathode. A series of photoelectron spectroscopy studies on cathode structures including Al/LiF and $Al/CaF_2$ revealed that the performance enhancement originated mainly from the HOMO peak shift upon the fluoride deposition rather than the formation of the gap states