• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.900-902
• /
• 1999

This paper deals with the interrupting characteristics of fuses element in different media of arc extinguisher. Aluminum hydro-oxide, boron nitride, silica and there size have been investigated here for their prospects as filling media in heavy current, high breaking capacity fuses. The result of these study are compared with those on silica sand at high current. This study demonstrates that silica sand is far superior filler in fuses for heavy current interrupting then the compound tested.

• 한국생산제조학회지
• /
• 제19권4호
• /
• pp.455-461
• /
• 2010

Automated magnetic abrasive polishing which can be applied after machining of the mold on a machine tool without unloading is very effective for finishing a complicated injection mold surface. This study aims to realize one step polishing of free form surface with the same machine tool. For this purpose, magnetic flux density according to the change of curvature radii was simulated for selecting polishing conditions and experimental verification was performed with a complicated mold of aluminum alloy. As a result, it was seen by the simulation that the magnetic flux density at a gradual curvature of the mold was higher than at a steep curvature and the higher magnetic flux density produced the better surface roughness in the experimentation. The deviation for the surface roughness of the mold decreased on the whole and the uniform mold surface was obtained after the automated magnetic abrasive polishing.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.591-593
• /
• 2003

Silicone composites for high voltage insulator(HVI SC) were prepared by adding aluminum trihydrate(ATH) treated by surface treatment agent to base silicone compound at the ratio of 100:20, 100:40, 100:60, 100:80, and 100:100, respectively. And also, ATH was treated by various surface treatment agents, such as stearic acid, acryl silane vinyl silane under compounding process. electrical properties were investigated for the various contents of ATH and solace-treatment agents we mlas ured volume resistivity, breakdown and tracking resistance were for HVISC containing ATH treated by viuyl silane.

• 한국레이저가공학회지
• /
• 제14권4호
• /
• pp.9-13
• /
• 2011

The solar panel that consists of copper plate and copper tube was successfully welded by ultrasonic seam welding. However it was not only expensive the copper material but also ultrasonic welding has many problem such as high error rate, difficulty of dissimilar material welding, noise, etc. At this study, the laser welding of solar panel with aluminum plate instead of copper. The welding were carried out with the pulsed Nd:YAG laser and the weld bead geometry was measured with the variation of pulse energy. Consequently, there was no difference between the ultrasonic and the laser welding on the performance of heat transfer capacities. Also the formation of intermetalic compound such as CuAl2 was increased with the pulse energy.

• Bulletin of the Korean Chemical Society
• /
• 제20권1호
• /
• pp.65-68
• /
• 1999

Novel mononuclear group 13 metal complexes with the formula (R2M){NC5H4C(CH3)NNC(S)NH(C6H5)} (M=Al, R=iC4H9 (1); M=Ga, R=iC4H9 (2); M=Al, R=CH2SiMe3 (3); M=Ga, R=CH2SiMe3 (4)) result when 2-acetyl pyridine 4-phenyl-thiosemicarbazone ligand is mixed with trialkyl aluminum or trialkylgallium. These compounds 1-4 are characterized by microanalysis, NMR (1H, 13C) spectroscopy, mass spectra, and singlecrystal X-ray diffraction. X-ray single-crystal diffraction analysis reveals that 1 is mononuclear metal compound with coordination number of 5 and N, N, S-coordination mode.

• Bulletin of the Korean Chemical Society
• /
• 제15권8호
• /
• pp.644-649
• /
• 1994

The approximate rates and stoichiometry of reaction of excess dipyrrolinoaluminum hydride (DPAH) with selected organic compounds containing representative functional groups under standardized conditions (tetrahydrofuran, 0, reagent : compound=4 : 1) were examined in order to define the characteristics of the reagent for selective reductions. The reducing ability of DPAH was also compared with that of bis(diethylamino)aluminum hydride (BEAH). The reagent appears to be stronger than BEAH, but weaker than the parent reagent in reducing strength. DPAH shows a unique reducing characteristics. Thus, the reagent reduces aldehydes, ketones, esters, acid chlorides, epoxides, and nitriles readily. In addition to that, ${\alpha},\;{\beta}$-unsaturated aldehyde is reduced to the saturated alcohol. Quinone are reduced cleanly to the corresponding 1,4-reduction products. The examination for possibility of achieving a partial reduction to aldehydes was also performed. Both primary and tertiary aromatic carboxamides are converted to aldehydes with a limiting amount of DPAH. Finally, disulfides and sulfoxides are readily reduced to thiols and sulfides, respectively.

• 약학회지
• /
• 제13권2_3호
• /
• pp.88-92
• /
• 1969

As a part of series of "Studies on Inorganic Chinese Drugs in Korea" four arsenic mineral Chinese drugs were analyzed by emission spectrographic method, and also were studied crystallographically by X-ray diffraction method. The following results were revealed: 1) Tang-shin-suk was not a Native arsenic but a Arsenolite which containing 94% of $As_{2}O_{3}$, 2) Toh-shin-suk was Crade Aluminum silicate 3) Woong-whang was a Realgar $As_{2}S_{2}$, 4) Yeh-suk was a Ca-Al-Silicate which was mixed with .alpha.-quartz contaminated by Iron compound and trace amount of Arsenic. It was not verified that the presence of Arsenopyrite FeAsS which has been believed as a main component of Yeh-suk by a Japanese author Wakimizu, nor the presence of Arsenolite which was reported by Masutomi.

• Bulletin of the Korean Chemical Society
• /
• 제13권2호
• /
• pp.176-179
• /
• 1992

New method for preparing cyclopentanediol from bicyclic ketal is described. Bicyclic ketal is cleaved to give 1,5-diketone, which is then reductively coupled intramolecularly to yield 1,2-cyclopentanediol. A solution of bicyclic ketal (1a) in methylene chloride was treated with aluminum chloride(2 eq.)-sodium iodide(l.5 eq.) at ambient temperature for 3 h to give the 1,5-diketone (2a) in 71% yield after basic work-up followed by short path column chromatography. A solution of the 1,5-diketone (2a) in THF was reacted with titanium tetrachloride(6 eq.)-Mg(Hg)(0.3 eq.) at $0^{\circ}C$ for 4 h to give the 1,2-cyclopentanediol (3a) in 75% yield after basic work-up followed by short path column chromatography.

• 폴리머
• /
• 제36권6호
• /
• pp.693-698
• /
• 2012

본 연구에서는 높은 분자량의 polylactide(PLA)를 중합하기 위하여 aluminum isopropyl oxide($Al(O-i-Pr)_3$)를 아민기로 표면 기능화된 실리카에 담지하고 이를 촉매로 이용하여 생성된 PLA의 중합특성을 확인하였다. 담지촉매는 먼저 실리카 표면을 아민기를 갖는 실란화합물로 기능화한 후 $Al(O-i-Pr)_3$을 in-situ 합성하였다. 기능기에 담지된 $Al(O-i-Pr)_3$는 MAO(methyl aluminoxane) 존재하에 중합활성을 보였다. $115^{\circ}C$에서는 표면 기능화된 아민기양이 증가할수록 전환율과 분자량이 증가하였고, $130^{\circ}C$에서는 표면 기능화된 아민기양이 증가할수록 전환율은 감소하였으나 분자량은 크게 증가하여 표면 기능화된 아민기양이 3.0 mmol일 경우 44000 g/mol로 가장 높은 분자량을 얻었다. GPC curve를 통해 $115^{\circ}C$ 중합온도에서는 분자량 분포곡선이 bimodal 형태에서 저분자량 부분이 크게 증가하여 shoulder 형태로 변화하였으며 $130^{\circ}C$에서는 GPC 단일피크를 보였다. 균일계 $Al(O-i-Pr)_3$ 촉매보다 아민기로 표면 기능화된 실리카에 담지된 $Al(O-i-Pr)_3$ 촉매가 더 높은 활성과 고분자량의 PLA를 합성할 수 있었다.

• 대한기계학회논문집A
• /
• 제34권10호
• /
• pp.1367-1375
• /
• 2010

본 연구에서는 핫스템핑 소재로 사용되는 보론합금강판 22MnB5의 단일 겹치기 점용접에서 용접부의 강도 향상을 위한 최적화를 수행하였다. 최적화 과정은 다구찌 실험계획법에 의해 행해졌으며 공정변수는 전류, 가압력 및 통전시간으로 선정하였고, 잡음인자로서 핫스템핑 시 소재의 가열온도와 유지시간을 고려하였다. 가열조건에 따라 22MnB5 표면의 알루미늄 도금층과 모재 간의 확산반응에 의해 화합물층 두께에 산포가 발생하였으며 이러한 산포는 너겟의 형성에 영향을 미치는 것을 알 수 있었다. 한편 용접부의 인장전단강도를 목적함수로 하였을 때, 이러한 가열조건에 강건한 최적의 용접 조건은 전류 8kA, 가압력 4kN, 통전시간 18cycle로 선정되었다. 최적 조건의 검증 결과 용접부의 인장전단강도 는 32kN으로서 요구되는 규격인 23kN보다 크게 증가되었다.