• Korean Journal of Materials Research
• /
• v.28 no.9
• /
• pp.495-498
• /
• 2018

Intermetallic compound matrix composites have been expected to be established as high temperature structural components. $Ni_3Al$ is a representative intermetallic alloy, which has excellent ductility even at room temperature by adding certain alloying elements. $Ni_3Al$ matrix composites with aluminum oxide particles, which are formed by the in-situ reaction between the alloy and aluminum borate whiskers, are fabricated by a powder metallurgical method. The addition of aluminum borate whiskers disperses the synthetic aluminum oxide particles during sintering and dramatically increases the strength of the composite. The uniform dispersion of reaction synthesized aluminum oxide particles and the uniform solution of boron in the matrix seem to play an important role in the improvement in strength. There is a dramatic increase in strength with the addition of the whisker, and the maximum value is obtained at a 10 vol% addition of whisker. The $Ni_3Al$ composite with 10 vol% aluminum oxide particles $0.3{\mu}m$ in size and with 0.1 wt% boron powder fabricated by the conventional powder metallurgical process does not have such high strength because of inhomogeneous distribution of aluminum oxide particles and of boron. The tensile strength of the $Ni_3Al$ with a 10 vol% aluminum borate whisker reaches more than twice the value, 930 MPa, of the parent alloy. No third phase is observed between the aluminum oxide and the matrix.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.4
• /
• pp.351-357
• /
• 1995

The surface layer of the aluminum film reactively ion etched in $CF_4$ plasma was ana alyzed by using XPS. $AlF_3$ which is nonvolatile is formed at the aluminum surface. As the analyzed depth increases, the intensity of the $Al_{2p}$ peak of Al - F bonds decreases while that of a aluminum metallic bond increases. The thickness of the $AlF_x$ surface layer is 50~100 $\AA$ and the deep penetration of fluorine atoms is attributed to the mixing effect by the bombardment of incident particles. For the aluminum oxide film which is etched in $CF_4$ plasma under the same conditions, oxygen atoms are substituted by fluorine atoms to form $$AIF_x$ surface layer, which is m much thinner than that formed on aluminum surface.

• Korean Journal of Materials Research
• /
• v.22 no.2
• /
• pp.97-102
• /
• 2012

The microstructure and tensile properties of Al-Mn/Al-Si hybrid aluminum alloys prepared by electromagnetic duocasting were investigated. Only the Al-Mn alloy showed the typical cast microstructure of columnar and equiaxed crystals. The primary dendrites and eutectic structure were clearly observed in the Al-Si alloy. There existed a macro-interface of Al-Mn/Al-Si alloys in the hybrid aluminum alloys. The macro-interface was well bonded, and the growth of primary dendrites in Al-Si alloy occurred from the macro-interface. The Al-Mn/Al-Si hybrid aluminum alloys with a well-bonded macro-interface showed excellent tensile strength and 0.2% proof stress, both of which are comparable to those values for binary Al-Mn alloy, indicating that the strength is preferentially dominated by the deformation of the Al-Mn alloy side. However, the degree of elongation was between that of binary Al-Mn and Al-Si alloys. The Al-Mn/Al-Si hybrid aluminum alloys were fractured on the Al-Mn alloy side. This was considered to have resulted from the limited deformation in the Al-Mn alloy side, which led to relatively low elongation compared to the binary Al-Mn alloy.

• Korean Journal of Food Science and Technology
• /
• v.27 no.6
• /
• pp.915-920
• /
• 1995

This study was performed to investigate the effect of aluminum compound on the aluminum contents and histological change in brain tissue of rats. Seventy five male Sprague-Dawley strains were divided into five groups consisting of the control, 250 ppm $AlCl_3$ group, 500 ppm $AlCl_3$ group, 250 ppm $Al_2(SO_4)_3$ group, 500 ppm $Al_2(SO_4)_3$ group and kept on the diet for 2 weeks. The weight gain was increased by administration of $AlCl_3$ but decreased by administration of $Al_2(SO_4)_3$ as compared to control group. The aluminum contents in brain tissue of each group; 250 ppm $AlCl_3$ group, 500 ppm $AlCl_3$ group, 250 ppm $Al_2(SO_4)_3$ group and 500 ppm $Al_2(SO_4)_3$ group were 64.63, 102.21, 132.64 and 180.41 ppm, respectively. Aluminum accumulation in brain tissue was higher with administration of $Al_2(SO_4)_3$ than with administration of $AlCl_3$. In $AlCl_3$ administration group, multiple small intracytoplasmic granules and microvacuole were seen in large pyramidal cells of cortex and granulovacuolar degeneration. In $Al_2(SO_4)_3$ administration group revealed pollagis pallor, cellular pyknosis, microcavitation resulted from edema in deeper cortical layers were observed. Blue-pigmentation which represents the accumulation of aluminum was noted In granulovacuolar degeneration site in $Al_2(SO_4)_3$ administration group.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.240-240
• /
• 2003

SiC 섬유의 고온강도를 향상시키기 위한 소결조제로 boron, aluminum 등을 사용할 수 있다. 본 연구에서는 폴리카보실란에 aluminum precursor를 첨가한 후 중합반응을 거쳐 Al-contained polycarbosilane을 합성하였다. 합성된 Al-contained polycarbosilane을 용융방사하여 섬유화 하고 열분해 공정을 통해 Si-Al-C-O 나노복합 섬유를 제조하였다. 먼저 aluminum butoxide와 polycarbosilane(commercial)을 200m1 xylene에 용해시켜 14$0^{\circ}C$에서 1시간 동안 reflux하였다. evaporator를 이용하여 xylene를 제거한 후 autoclave에서 25$0^{\circ}C$/30$0^{\circ}C$ 중합과정을 통해 가교결합 시켰다 이와 같이 합성된 시료는 ICP분석을 통해 aluminum 함량을 확인하였고 FT-IR(Fig.1) 및 GPC분석(Fig.2)으로부터 화학구조 및 분자량변화를 확인하였다. aluminum 첨가량이 증가함에 따라 Si-H/Si-$CH_3$의 결합크기의 비가 감소하였으며 이로부터 aluminum butoxide와 polycarbosilane의 가교결합이 이루어진 것으로 보이며 중합 후 분자량의 증가 또한 가교결합에 의한 결과로 사료된다 열무게감량(TGA) 측정 결과는 40$0^{\circ}C$부터 유기리간드의 분해가 일어나며 80$0^{\circ}C$이상에서 세라믹화 과정이 완료되었음을 알 수 있었다 또한 aluminum 첨가량이 증가함에 따라 세라믹 수율도 증가하였음을 확인하였다. 합성된 aluminum-contained polycarbosilane은 20$0^{\circ}C$에서 1시간 동안 불융화과정을 거쳐 환원 및 진공 분위기에서 고온 열처리하였으며 이로부터 얻어진 시료에 대해 XRD분석을 수행하였다. SEM과 TEM을 이용하여 미세구조를 관찰하였다.

• Resources Recycling
• /
• v.18 no.6
• /
• pp.18-23
• /
• 2009

An investigation on the synthesis of aluminum citrate, one of the aluminum organic compounds, has been performed using aluminum chloride solutions as a starting material. For the synthesis of aluminum citrate, citric acid was added to aluminum solutions with the mole ratio of citric acid to aluminum to be 2.5 and aluminum citrate synthesized was also characterized in terms of chemical analysis, X-ray diffraction, particle size measurement and SEM analysis. As a result, it was found that the ratio of ethanol/Al solution more than 4.0 was required for the synthesis of aluminum citrate from aluminum solutions. Furthermore, the pH should be controlled to be more than 7.0 in order to obtain the recovery of aluminum citrate higher than 97%. From the chemical analysis of aluminum citrate synthesized in this work, the content of $NH_4$, Al and C was found to be 17.0, 4.01 and 25.7%, respectively. Accordingly, the aluminum citrate synthesized from aluminum solutions was confirmed to be $(NH_4)_5Al(C_6H_4O_7)_2{\cdot}2H_2O$.

• Korean Journal of Materials Research
• /
• v.17 no.11
• /
• pp.612-617
• /
• 2007

Both photoluminescence and thermal characteristics for $SrAl_2O_4:Eu^{+2},\;Dy^{+3}$ phosphors synthesized with various aluminum compounds (${\alpha}-Al_2O_3$, ${\gamma}-Al_2O_3$, amorphous-$Al_2O_3$ and $Al(OH)_3)$ were investigated in this study. The formation temperature of the host $SrAl_2O_4$ crystal is changed by these various aluminum compounds, as a result of the different thermal decomposition temperature of $SrCO_3$ phase. Among these compounds, the amorphous-$Al_2O_3$ phase shows the lowest formation temperature of the host $SrAl_2O_4$ crystal. The PL emission and excitation spectra of $SrAl_2O_4:Eu^{+2},\;Dy^{+3}$ phosphor are not affected by these aluminum compounds. After the removal of the Xenon lamp excitation (360 nm), however, the excellent longphosphorescent property of the phosphor is obtained by the amorphous-$Al_2O_3$ phase, although the decay time for all phosphors decrease exponentially.

• Tribology and Lubricants
• /
• v.34 no.2
• /
• pp.67-73
• /
• 2018

Ni-Al intermetallic coating technology is an available method for the strengthening of aluminum substrate. In this study, Ni-Al intermetallics were coated on an aluminum substrate through a reaction synthesis process at a temperature lower than melting point of aluminum. And the sliding wear properties of the coatings have been investigated to verify their usability and compared the wear properties with those of a cast Al-12.5%Si alloy and an anodizing layer on aluminum. Results show that the wear rate of the coating layer greatly increased at 1 m/s and 1.5 m/s when compared with that of the cast Al-12.5%Si alloy. Much pitting damages were observed on the worn surfaces at these sliding speeds, unlike at other sliding speeds. The wear of the intermetallic coating layer at these sliding speeds seems to be increased by pitting as a consequence of adhesion. In contrast, wear of the coating layer at other speeds hardly occurs, regardless of wear periods. Nevertheless, the wear properties of the intermetallic coating layer on the aluminum substrate through the reaction synthesis process are more stable than those of anodized aluminum and are superior to those of the cast Al-12.5%Si alloy in a steady-state wear period.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.179-180
• /
• 2012

Aluminum alloys are widely known as non-ferrous metal with light weight and high strength. Consequently, these materials take center stage in the aircraft and automobile industry. The Al7075 aluminum alloy is based on the Al-Zn-Mg-Cu and one of the strongest wrought aluminum alloys. Aluminum nitride has ten times higher thermal conductivity($319W/m{\cdot}K$) than Al2O3 and also has outstanding electric insulation($1{\times}1014{\Omega}{\cdot}cm$). Furthermore, it has high mechanical property (430 MPa) even though its co-efficient of thermal expansion is less than alumina For these reasons, it has great possibilities to be used for not only the field which needs high strength lightweight but also electronic material field because of its suitability to be applied to the insulator film of PCB or wafer of ceramic with high heat conduction. This paper investigates the mechanical properties and corrosion behavior of aluminum alloy Al7075 deposited with aluminum nitride thin films To improve the surface properties of Al7075 with respect to hardness, and resistance to corrosion, aluminum nitride thin films have been deposited by pulsed DC reactive magnetron sputtering. The pulsed DC power provides arc-free deposition of insulating films.

• Journal of the Korean Ceramic Society
• /
• v.25 no.2
• /
• pp.111-116
• /
• 1988

Aluminum hydrates were prepared by precipitation method using Al2(SO4)3$.$18H2O as a starting material and NH4OH as precipitation agent. The phases of aluminum hydrate were changed from amorphous aluminum hydrate to pseudo-boehmite of AlOOH form and bayerite, gibbsite, hydragillite and norstrandite of Al(OH)3 form with increasing pH. As pH increased, agglomeration phenomena were reduced. Aluminum hydrates of AlOOH and Al(OH)3 form represented dehydration of structural water near 175$^{\circ}C$ and 385$^{\circ}C$, and 280$^{\circ}C$, respectively. As the ratio of Al(OH)3 to AlOOH increased, specific surface area was reduced.