1 |
Akhlaghi, F., Zare-bidaki, A., "Influence of graphite content on the dry sliding and oil impregnated sliding wear behavior of Al 2024-Grapgite composites produced by in situ powder metallurgy method", Wear, Vol. 266, pp. 37-45, 2009.
DOI
|
2 |
Prasada Rao, A. K., Das, K., Murty, D. S., Chakraborty, M., "Microstructure and wear mechanism of grainrefined aluminum during dry sliding against steel disc", Wear, Vol. 264, pp. 638-647, 2008.
DOI
|
3 |
Md. Aminul Islam, A. S. M. A. Haseeb, "A comparative wear steady on heat-treated aluminum-lithium alloy and pour aluminum", Mater. Sci. Eng., Vol. A268, pp. 101-108, 1999.
|
4 |
Korkut, M. H., "Microstucture and wear behavior of Al2024/SiFe and Al2024 / SiFe / Composites", Tribology International, Vol. 36, pp. 169-180, 2003.
DOI
|
5 |
Liu, L., Li, W., Tang, Y., Shen, B., Hu, W., "Fiction and wear properties of short carbon fiber reinforced aluminum matrix composites", Wear, Vol. 266, pp. 733-738, 2009.
DOI
|
6 |
Mandal, A., Murty, B. A., Chakraborty, M., "Sliding wear behavior of T6 treated A356-TiB2 in-situ composites", Wear, Vol. 266, pp. 865-872, 2009.
DOI
|
7 |
Kent R. Van Horn, "Aluminum Vol. I", Chap.7, pp. 252-253, American Society for Metals, Ohio, USA, 1967.
|
8 |
Lee, H.-Y., Roe, J.-K., Ikenaga, A., "Sliding wear properties for Ni-Al based intermetallic compound layer coated on ductile cast iron by combustion synthesis", Vol. 260, pp. 83-89, 2006.
DOI
|
9 |
Salehi, M., Karimzad, E., Tahvilian, A., "Formation of TiNi Intermetallic coatings on carbon tool steel by a duplex process", Sur & Coat. Tech., Vol. 148, pp. 55-60, 2001.
DOI
|
10 |
Lee, H.-Y., Kim, T.-J., Cho, Y.-J., "Effects of Induction heating conditions on Ni-Al based intermetallic compound coating", Kor. J. Met. Mater, Vol. 48, No. 2, pp. 141-147, 2010.
DOI
|
11 |
Izumi, T., Nishimoto, T. Narita, T., "Formation and oxidation behavior of Coating on Heat-resistant Ti-Alloy", Intermetallics, Vol. 12, pp. 615-619, 2005.
|
12 |
Lee, H.-Y., Kim, G.-Y., "Nickel aluminides coating on aluminum substrate using a reaction synthesis process", Metal and Materials Int., Vol. 21, No. 1, pp. 147-152, 2015.
DOI
|
13 |
Lee, H.-Y., "Analysis of sliding wear mode on annealed steel by X-ray diffraction technique", Wear, Vol. 256, pp. 657-663, 2004.
DOI
|