• Corrosion Science and Technology
• /
• 제7권3호
• /
• pp.158-161
• /
• 2008

It is well known that iron is one of the most common impurity elements found in aluminum and its alloys. Iron in the aluminum forms an intermetallic compounds such as $FeAl_3$. The $FeAl_3$ particles on the aluminum surface are one of the most detrimental phases to the corrosion process and anodizing procedure for aluminum and its alloys. Trial and error surface treatment will be carried out to find the preferential and effective removal of $FeAl_3$ particles on the surfaces without dissolution of aluminum matrix around the particles. One of the preferable surface treatments for the aim of getting $FeAl_3$ free surface was an electrochemical treatment such as cathodic current density of $-2kAm^{-2}$ in a 20-30 mass% $HNO_3$ solution for the period of 300s. The corrosion characteristics of aluminum surface with $FeAl_3$ free particles are examined in a $0.1kmol/m^3$ NaCl solution. It is found that aluminum with free $FeAl_3$ particles shows higher corrosion resistance than aluminum with $FeAl_3$ particles.

• 자원리싸이클링
• /
• 제20권2호
• /
• pp.54-59
• /
• 2011

염화알루미늄 수용액을 원료로 하여 알루미늄 유기화합물인 aluminum tartrate 합성실험을 수행하였다. 합성시 ethanol/Al solution 혼합비율 및 pH가 합성율에 미치는 영향을 조사하였으며, 합성된 aluminum tartrate는 화학분석, X-선 회절분석, 입도분석 및 SEM 분석을 통하여 시료특성을 평가하였다. 실험결과, ethanol/Al solution 혼합비율 3.0에서 pH 3.0 이상인 경우 aluminum tartrate 합성율은 97% 이상으로 나타났다. 합성반응을 통해 얻은 aluminum tartrate의 각 화학분석결과 $NH_4$ 9.10%, Al 4.83% 및 C 25.8%이었으며, 이의 화학식은 $(NH_4)_3Al(C_4H_4O_6)_3$임을 확인할 수 있었다.

• Tribology and Lubricants
• /
• 제28권2호
• /
• pp.56-61
• /
• 2012

In order to investigate the possibility of Ni-Al based intermetallics coating onto aluminum substrate, the coating process for induction heating has been evaluated by microscopically analyzing the intermetallic layers coated at temperatures lower than the melting temperature of aluminum. The coating layers were divided into two parts with different microstructure along the depth. Hard $NiAl_3$ layer was found at lower parts of the coatings near the interface with aluminum substrate. This layer was formed by the diffusion of aluminum atoms from the substrate into the coating layer across the interface during the induction heating. Meanwhile, at the upper parts of the coating near the surface, a large amount of un-reacted Ni was still remained and surrounded by several Ni-Al based intermetallic compounds, such as $Ni_3Al$, NiAl and $Ni_2Al_3$ formed by the lattice diffusion.

• 한국세라믹학회지
• /
• 제40권8호
• /
• pp.720-724
• /
• 2003

Aluminum nitride (AlN) powders were synthesized by using a mixture of an aluminum nitrate or sulfate salt and carbon (mole ratio of $Al^{3+}$ to carbon=L : 30). The AlN was obtained by calcining the mixture under a flow of nitrogen in the temperature range 1100-1$600^{\circ}C$ and then burning out the residual carbon. The process of conversion of the salt to AlN was monitored by XRD and $^{27}$ Al magic-angle spinning (MAS) NMR spectroscopy. The salt decomposed to ${\gamma}$-alumina and then converted to AlN without phase transition from ${\gamma}$-to-$\alpha$-alumina. $^{27}$ Al MAS NMR spectroscopy shows that the formation of AlN commenced at 110$0^{\circ}C$. AlN powders obtained from the sulfate salt were superior to those from the nitrate salt in terms of homogeneity and crystallinity. A very small amount of AlN whiskers was obtained by calcining a mixture of an aluminum sulfate salt and carbon at 115$0^{\circ}C$ for 40 h, and the growth of the whiskers is well explained by the particle-to-particle self-assembly mechanism.

• 자원리싸이클링
• /
• 제18권4호
• /
• pp.38-43
• /
• 2009

수산화알루미늄을 원료물질로 하여 알루미늄 유기화합물인 aluminum oxalate 합성실험을 수행하였다. 이를 위해 국산 99.7% 순도의 수산화알루미늄을 옥살산으로 용해하는 방법으로 알루미늄 수용액을 제조하였으며, 실험결과 옥살산 농도 1.0 mole/l, 반응온도 $90^{\circ}C$에서 16시간 용해시 거의 100%에 가까운 용해율을 얻을 수 있었다. 알루미늄 수용액으로부터 aluminum oxalate를 합성하기 위해서는 ethanol/Al solution 혼합비율을 2.0이상으로 유지하여야 하는 것으로 나타났다. 또한, 90% 이상의 회수율을 얻기 위해서는 혼합액의 pH를 8.2이상으로 조절하여야 하는 것으로 나타났다. 합성반응을 통해 얻은 aluminum oxalate의 화학분석결과 $NH_4$ 14.5%, Al 7.18% 및 C 17.4%이었으며, 이의 화학식은 $(NH_4)_3Al(C_2O_4)_3$ $3H_2O$임을 확인할 수 있었다.

• 한국세라믹학회지
• /
• 제33권9호
• /
• pp.961-968
• /
• 1996

The aluminum nitride was synthesized by the self-propagating high-temperature synthesis(SHS). The synthe-sis was used aluminum powder mixed with AlN powder as reactant and the control factors affected to synthesis were considered compact density pressure of reaction gas AlN diluent content and aluminum powder size. The SHS reaction conducted with a reactant containing 50% AlN diluent under 0.8MPa nitrogen gas pressure yielded a complete conversion of aluminum powder to AlN powders. The size and purity of AlN produced were found to be comparable with that of AlN produced by the carbothermal nitrogen method.

• Corrosion Science and Technology
• /
• 제3권4호
• /
• pp.161-165
• /
• 2004

Aluminum source in an Al-Fe coating reacts with molten carbonate and develops a protective $LiAlO_2$ layer on the coating surface during operation of molten carbonate fuel cells (MCFC). However, if aluminum content in an Al-Fe coating decreases to a critical level for some reasons during MCFC operation, a stable and continuous $LiAlO_2$ protective layer can no longer be maintained. The aluminum content in an Al-Fe coating can be depleted by two different processes; one is by corrosion reaction at the surface between the aluminum source in the coating and molten carbonate, and the other is inward-diffusion of aluminum atoms within the coating into a substrate. In these two respects, therefore, the decreasing rate of aluminum concentration in an Al-Fe coating was measured, and then the influences of these two aspects on the lifetime of Al-Fe coating were investigated, respectively.

• 한국재료학회지
• /
• 제16권12호
• /
• pp.771-776
• /
• 2006

In this study, we report a method to synthesize the aluminum nitride (AlN) powders from aluminum oxyhydroxide (AlOOH). AlOOH powders were prepared from the aluminum hydroxide ($Al(OH)_3$) by heattreatment at the reaction temperature of $350^{\circ}C$. Simple heat treatment of AlOOH in the flow of $NH_3$ gas leads to the formation of hexagonal AlN powders through intermediate conversion of ${\delta}-,\;{\gamma}-$ and ${\alpha}-Al_2O_3$. The FTIR transmission spectra show a broad peak related to Al-N bonds centered around 690 $cm^{-1}$ confirming the presence of AlN. The major peaks in Raman spectra were observed in 250 $cm^{-1}$ and 659 $cm^{-1}$. From the results, synthesized powders from the AlOOH powders were confirmed AlN powders.

• 한국자동차공학회논문집
• /
• 제5권6호
• /
• pp.64-76
• /
• 1997

This paper deals with development of brackets by using aluminum alloy sheets which is indispensable for weight reduction of autobody. The press formability of aluminum alloy sheet is estimated by means of tensile test, V bending test, sample manufacturing test and photograph of microstructure. The results show that the elongation, strength, work hardening exponent, plastic anisotropy coefficient of Al 6***series are better than those of Al 5***series, but for general press formability, Al 5***series are better than Al 6***series due to lower yield strength. Since most of mechanical properties of aluminum sheet are generally inferior to those of cold-rolled steel sheet, shape fixability and press formability of aluminum sheet are very poor. For making components of autobody by use of die for steel sheet application, it is essential that die should be nodified for least bending and stretching. With the modified die for aluminum, it could be possible to make brackets, the component of autobody. Microstructure of Al 5***series has fine grain and small the 2nd phase and that of Al 6***series has relatively coarse grain. Therefore, it seems that fine grain and small the 2nd phase of Al 5***series is one of the factor of lower yield strength, resistance to stamping work, formation of Luder's line.

• 한국분말재료학회지
• /
• 제11권4호
• /
• pp.294-300
• /
• 2004

This study for preparation of aluminum nitride (AlN) with high purity was carried out by self-propagating high-temperature synthesis method in two different systems, $Al-N_{2}$ and $Al-N_{2}$-AlN, with the change of nitrogen gas pressure and dilution factor. On the occasion of $Al-N_{2}$ system, unreacted aluminum was detected in the product in spite of high nitrogen pressure, 10 MPa, This may be caused by obstructing nitrogen gas flow to inner part of molten and agglomerate of aluminum, formed in pre-heating zone. In $Al-N_{2}$-AlN system, AlN with a purity of 95% or ever can be prepared in the condition of $f_{Dil}\geq0.5$, $P_{N_{2}}\geq$ 1 MPa, and the purity can be elevated to 98% over in the condition of $f_{Dil}$ = 0.7 and $P_{N_{2}}$ = 10 MPa.