• Journal of the Korean Society of Radiology
• /
• v.10 no.8
• /
• pp.597-602
• /
• 2016

Recent clinical field utilizes the aluminium filter in order to reduce the low-energy photons. However, the usage of the filter can cause adverse effect on the image quality because of the scattered dose that is generated by X-ray hardening phenomenon. Further, usage of filter with improper thickness can be a reason of dose creep phenomenon where unnecessary exposure is generated towards the patient. In this study, the author evaluated the RMS and the RSD analysis in order to have a quantitative evaluation for the effect of forward scattering dose by the filter on the image. as a result of the study, the FSR and the RSD was increased together with the increasing of thickness of the filter. In this study the RSD means the standard deviation of the mean value is relatively size. It can be understood that the signal-to-noise ratio decreases when the average value is taken as a signal and the standard deviation is judged as a noise. The signal-to-noise ratio can understanding as index of resolution at image. Based on these findings, it was quantitatively verified that there is a correlation of the image quality with the FSR by using an additional filter. The results, a 2.5 mmAl which is as recommended by NCRP in the tube voltage of 70 kVp or more showed the 14.6% on the RSD when the filter was not in used. these results are considered able to be utilized as basic data for the study about the filter to improve the quality of the image.

• Nuclear Medicine and Molecular Imaging
• /
• v.40 no.4
• /
• pp.228-232
• /
• 2006

Purpose: electrophilic $^{18}F(T_{1/2}=110\;min)$ radionuclide in the form of $[^{18}F]F_2$ gas is of great significance for labeling radiopharmaceuticals for positron omission tomography (PET). However, its production In high yield and with high specific radioactivity is still a challenge to overcome several problems on targetry. The aim of the present study was to develop a method suitable for the routine production of $[^{18}F]F_2$ for the electrophilic substitution reaction. Materials and Methods: The target was designed water-cooled aluminum target chamber system with a conical bore shape. Production of the elemental fluorine was carried out via the $^{18}O(p,n)^{18}F$ reaction using a two-step irradiation protocol. In the first irradiation, the target filled with highly enriched $^{18}O_2$ was irradiated with protons for $^{18}F$ production, which were adsorbed on the inner surface of target body. In the second irradiation, the mixed gas ($1%[^{19}F]F_2/Ar$) was leaded into the target chamber, fellowing a short irradiation of proton for isotopic exchange between the carrier-fluorine and the radiofluorine absorbed in the target chamber. Optimization of production was performed as the function of irradiation time, the beam current and $^{18}O_2$ loading pressure. Results: Production runs was performed under the following optimum conditions: The 1st irradiation for the nuclear reaction (15.0 bar of 97% enriched $^{18}O_2$, 13.2 MeV protons, 30 ${\mu}A$, 60-90 min irradiation), the recovery of enriched oxygen via cryogenic pumping; The 2nd irradiation for the recovery of absorbed radiofluorine (12.0 bar of 1% $[^{19}F]fluorine/argon$ gas, 13.2 MeV protons, 30 ${\mu}A$, 20-30 min irradiation) the recovery of $[^{18}F]fluorine$ for synthesis. The yield of $[^{18}F]fluorine$ at EOB (end of bombardment) was achieved around $34{\pm}6.0$ GBq (n>10). Conclusion: The production of $^{18}F$ electrophilic agent via $^{18}O(p,n)^{18}F$ reaction was much under investigation. Especially, an aluminum gas target was very advantageous for routine production of $[^{18}F]fluorine$. These results suggest the possibility to use $[^{18}F]F_2$ gas as a electrophilic substitution agent.

• Restorative Dentistry and Endodontics
• /
• v.34 no.1
• /
• pp.61-68
• /
• 2009

This study was performed to assess the radiopacity of a variety of root canal sealers according to the specification concerning root canal sealers. Ten materials including Tubli-$Seal^{TM}$. Kerr Pulp Canal $Sealer^{TM}$, AH $26^{(R)}$, AH $plus^{(R)}$, AH plus $jet^{TM}$, Ad sea $1^{TM}$. $Sealer^{TM}$, $NOGENOL^{TM}$, ZOB $seal^{TM}$, $Epiphany^{TM}$ and dentin were evaluated in this study. In the first part, densitometric reading of an each step of aluminum step wedge on occlusal film was performed at different voltage and exposure time. In the second part, ten specimens were radiographed simultaneously with an aluminum step wedges on the occlusal films under decided condition. The mean radiographic density values of the materials were transformed into radiopacity expressed equivalent thickness of aluminum (mm Al). The following results were obtained. 1. Among the various conditions, the appropriate voltage and exposure time that meet the requirement density was 60 kVp at 0.2 s 2. All of the materials had greater radiopacity than 3 mm Al requirement of ANSI/ADA specification No. 57 (2000) and ISO No. 6876 (2001) standards. 3. The radiopacity of materials increased as thickness of materials increased. 4. The mm Al value of each specimen at 1mm in thickness has a significant difference in the statistics. It suggests that root canal sealers have a sufficient radiopacity that meet the requirement.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.2
• /
• pp.146-158
• /
• 2002

The purpose of this study was to investigate the effects of Nd:YAG laser on mechanically exposed pulp of dog by the observation of pulpal inflammatory change and heal process including dentinal bridge, structural changes of fibroblasts of thr remaining vital pulp tissue. In experimental group 1, the exposed pulps were irradiated with Nd:YAG laser(3W, 30Hz, 0.2sec) for $2{\sim}3$ second followed by capped with aluminium tin foil. In group 2 and group 3, the exposed pulps were irradiated with Nd:YAG laser via contact(Group 2) and non-contact(Group 3) methods followed by capped with calciumhydroxide paste. The animal were sacrificed at the intervals of 3, 7, 14 and 30days for histologic evaluation. The results were as follows : 1. The dentinal bridges were formwd more fast and broadly in the experimental group 1 and 2 than other groups, but there were no histologic differences in the degree of their formation among control group, experimental group 1. 2. Odontoblastic activities at amputated pulp was increased in the experimental group 2, 3 than other group but there no histologic difference in the odontblastic activitiy among control group, experimental group 1. 3. The infalmmation was severe at the postoperative 1 week of all groups, but its condition subsideed with time elapsed. At the postoperative 3, 7 days, its condition in experimental group 2, 3 were less severe than in the group 1. 4. There were no histologic differences between the experimental group 2 and 3 according to the degree of dentin bridge formation.

• Restorative Dentistry and Endodontics
• /
• v.25 no.3
• /
• pp.399-406
• /
• 2000

The effect of inlay surface treatment on bonding was investigated when resin inlay was bonded to resin-modified glass-ionomer base with resin cement. For the preparation of glass-ionomer base, resin-modified glass-ionomer cement (Fuji II LC, GC Co., Japan) was filled in class I cavities of 7mm in diameter and 2mm in depth made in plastic molds. Eighty eight resin inlay specimens were made with Charisma$^{(R)}$ (Kulzer, Germany) and then randomly assigned to the four different surface treatment conditions: Group I, $50{\mu}m$ aluminium oxide sandblasting and silane treatment ; Group II, silane treatment alone ; Group III, sandblasting alone, and Group IV (control), no surface treatment. After a dentin bonding agent with primer (One-Step$^{TM}$, Bisco Inc., IL., U.S.A.) was applied to bonding surface of resin inlay and base, resin inlay were cemented to glass-ionomer base with a resin cement (Choice$^{TM}$, Bisco Inc., IL., U.S.A.). Shear bond strengths of each specimens were measured using Instron universal testing machine (4202 Instron, lnstron Co., U.S.A.) and fractured surfaces were examined under the stereoscope. Statistical analysis was done with one-way ANOVA and Dunkan's multiple range test. The results were as follows: 1. Sandblasting and silane treatment provided the greatest bond strength(10.56${\pm}$1.95 MPa), and showed a significantly greater bond strength than sandblasting alone or no treatment (p<0.05). 2. Silane treatment provided a significantly greater bond strength(9.77${\pm}$2.04 MPa) than sandblasting alone or no treatment (p<0.05). However, there was no significant difference in bond strength between sandblasting treatment and silane one (p>0.05). 3. Sandblasting alone provided no significant difference in bond strength from no treatment (p>0.05). 4. Stereoscopic examination of fractured surface showed that sandblasting and silane treatment or silane treatment alone had more cohesive failure mode than adhesive failure mode. 5. In relationship between shear bond strength and failure mode, cohesive failure occurred more frequently as bond strength increased.

• Journal of Periodontal and Implant Science
• /
• v.32 no.1
• /
• pp.199-211
• /
• 2002

Digital substraction technique and computer-assisted densitometirc analysis detect minor change in bone density and thus increase the diagnostic accuracy. This advantage as well as high sensitivity and objectivity which precludes human bias have drawn interest in radiologic research area. The objectives of this study are to verify if Radiographic density can be recognized in linear pattern when density profile of standard periapical radiograph with the aluminium stepwedge as the reference, was investigated under varies circumstances which can be encountered in clinical situations, and in addition to that to obtain mutual relationship between the existing standard radiographic system, and future digital image systems, by confirming the corelationship between the standard radiograph and Digora system which is a digital image system currently being used. In order to make quantitative analysis of the bone tissue, digital image system which uses high resolution automatic slide scanner as an input device, and Digora system were compared and analyzed using multifunctional program, Brain3dsp. The following conclusions were obtained. 1. Under common clinical situation that is 70kVp, 0.2 sec., and focal distance 10cm, Al-Equivalent image equation was found to be Y=11.21X+46.62 $r^2=0.9898$ in standard radiographic system, and Y=12.68X+74.59, $r^2=0.9528$ in Digora system, and linear relation was confirmed in both the systems. 2. In standard radiographic system, when all conditions were maintained the same except for the condition of developing solution, Al-Equivalent image equation was Y=10.07X+41.64, $r^2=0.9861$ which shows high corelationship. 3. When all conditions were maintained the same except for the Kilovoltage peak, linear relationship was still maintained under 60kVp, and Al-Equivalent image equation was Y=14.60X+68.86, $r^2=0.9886$ in the standard radiograhic system, and Y=13.90X+80.68, $r^2=0.9238$ in Digora system. 4. When all conditions were maintained the same except for the exposure time which was varied from 0.01 sec. to 0.8 sec., Al-Equivalent image equation was found to be linear in both the standard radiographic system and Digora system. The R-square was distributed from 0.9188 to 0.9900, and in general, standard radiographic system showed higher R-square than Digora system. 5. When all conditions were maintained the same except for the focal distance which was varied from 5cm to 30cm, Al-Equivalent image equation was found to be linear in both the standard radiographic system and Digora system. The R-square was distributed from 0.9463 to 0.9925, and the standard radiographic system had the tendency to show higher R-square in shorter focal distances.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.4
• /
• pp.1084-1091
• /
• 2015

Aquaculture of olive flounder started in the middle of 1980's and now farming has been taken place in many places along the coastal line in Korea. The taste of olive flounder has a good chewy texture because of high collagen content, low fat content, so it is popular for sliced raw fish. Olive flounder is popular among Koreans but the consumption pattern is uniformly so as to be used as sliced raw fish but not other ways. So, now there needs to develop high valued-processed food using olive flounder. This study was set to investigate the processing of terrine by using olive flounder, in which terrine is French style meat loaf that is well favored around the world. In this study, terrine was prepared by chopping olive flounder meat with 39 g egg white and 10 mL fresh cream (per 50 g fillet) and then seasoned with 5 mL lemon juice, 5 mL brandy, 0.05 g salt and 0.05 g pepper. The 25 g of dough was placed on a vinyl wrap, put with 2 g cheese, and layered an another 25 g dough, and then rolled up and wrapped by aluminium foil. Two different cooking methods were used for terrine processing in this study. Terrine-1 was cooked by vacuum sealed in polyethylene film ($20{\times}30{\times}0.05mm$) after boiling for 5 min and stored at $-20^{\circ}C$ for 7 days. Terrine-2 was prepared by vacuum sealed in polyethylene film ($20{\times}30{\times}0.05mm$) and stored at $-20^{\circ}C$ for 7 days. After 7 days, Terrine-1 was thawed and then heated up in microwave for 2 min (Sample-1), while Terrine-2 was thawed and then boiled in water for 5 min (Sample-2). Viable bacterial count, chemical composition, pH, salinity, hardness, TBA, free amino acid content, and sensory evaluation were measured for both Sample-1 and Sample-2. Especially, the scores of sensory evaluation of Sample-2 is slightly higher than that of Sample-1. On the other hand, there were no significant differences on color, odor, taste, texture, and overall acceptance between Sample-1 and Sample-2.

• Economic and Environmental Geology
• /
• v.38 no.4 s.173
• /
• pp.463-479
• /
• 2005

The Sr and Pb isotopic ratios and chemical composition were measured for atmospheric bulk deposition samples collected in the Jeonju, Gunsan and Namweon areas over a period of one year. Acidity of deposition ranged pH $4\~7$ with little higher in dry season, and around pH 5.0 in rainy season. The EC and TDS of rainy season was low showing dilution effect, and increased during dry season. Sulfate $(SO_4)\;and\;NO_3$ are atmospheric aerosols largely of anthropogenic origin in winter. Sodium was concentrated in winter deposition, Ca was concentrated in spring to summer deposition. Namweon has lower EC and TDS than those of other, and Jeonju has higher. Namweon was concentrated in $HCO_3$ and Cunsan was concentrated in Cl. Aluminium, Cu, and Zn show good correlation index with TDS, indicating of their origin atmospheric. $^{87}Sr/^{86}Sr$ ratios of bulk deposition ranged from 0.7109 to 0.7128. The isotopic variations are correlated with mixing of isotopic compositions of local soils, road deposit and biogenic aerosol. In order to constrain further the origin of aerosols in rainwater, it will be necessary to collect additional Sr isotopic data for aerosols. Lead isotope ratios for all areas were similar and belonged to Pb isotope ratios of Seoul's aerosols, but little different with Beijing's aerosols. It showing that Pb in the Korea mainly derived from the gasoline combustion, not exclusively from the Beijing.

• Journal of Food Hygiene and Safety
• /
• v.27 no.4
• /
• pp.349-355
• /
• 2012

In this study, we configured a system which ranks hazardous chemicals to determine their management priorities based on experts' opinions and the existing CRS (chemical ranking and scoring). Aggregate exposure of food, health functional food, oriental/herbal medicine and cosmetics have been taken into account to determine management priority. In this study, 25 hazardous chemicals were selected, such as cadmium, lead, mercury, and arsenic, etc. These 25 materials were ranked according to their 1) risk (exposure or hazard) indexes, 2) exposure source-based weight, and 3) public interests, which were also formed based on the existing priority ranking system. Cadmium was scored the highest (178.5) and bisphenol A the lowest (56.8). Ten materials -- cadmium, lead, mercury, arsenic, tar, acrylamide, benzopyrene, aluminium, benzene, and PAHs -- scored higher than 100. Eight materials -- aflatoxin, manganese, phthalate, chromium, nitrate/nitrite, ethylcarbamate, formaldehyde, and copper -- recorded scores in the range from 70 to 100. Also evaluated as potential risks were 7 materials; sulfur dioxide, ochratoxin, dioxins, PCBs, fumonisin, methyl mercury, and bisphenol A, and these materials were scored above 50. Then we compared risk index and correlation coefficient of total scores to confirm the validity of the total scores; we analyzed correlation coefficient of parameter and indicator. We discovered that the total score and weight, which has incorporated public interests, were high and statistically significant. In conclusion, the result of this study contributes to strengthening risk assessment and risk management of hazardous chemicals.

• Journal of the Korean Society of Floral Art and Design
• /
• no.43
• /
• pp.123-138
• /
• 2020

This study found Flower Jewelry works in the monthly magazine specializing in flower decoration for nine years from 2011 to 2019. Based on the analysis of the type of expression, method of expression, type and number of plant materials used, and the type and number of non-plant materials used for the flower jewelry found, it was conducted to find out the trend of flower jewelry in Korea. By expression type, a total of 96 works were analyzed as 20.83% for headdresses, 57.29% for necklaces, 5.21% for earrings, 6.25% for lists, and 10.42% for other works(χ²=94.833, p<.001). According to the analysis of the frequency of use of expression techniques, headdresses, necklaces, and lists for each work were produced using five to six different expression techniques and earrings were produced using two to four expression techniques. Material coupling techniques 34.43%, flower and leaf utilization 30.17%, visual techniques 16.63%, collectivization techniques 14.12%, technical highlighting techniques 4.26%, and other 0.39% (χ²=455.222, p<.001). The most frequently used techniques were framing techniques 16.63% and knotting techniques 16.44%. Plant materials used in flower jewelry were found to be 22.61% for Phalaenopsis spp., 13.48% for Gomphrena globosa, 9.57% for Gloriosa rothschildiana, 7.39% for Epidendrum cinnabarinum, 6.96% for Chamelaucium uncinatum and 4.78% for Craspedia globosa (χ²=718.104, p<.001). In the case of branch, the most common was used with 70.00% of the Cornus walteri, and 10.00% of Actinidia arguta, Celastrus orbiculatus, and Salix pseudolasiogyne were used respectively (χ²=10.800, p=.013). In the case of foliage, 24.65% Aspidistra elatior, 24.62% Asparagus asparagoides, 11.54% Senecio rowleyanus, and 6.15% Ceropegia woodii (χ²=269.385, p<.001). In the case of berries, 44.44% of the fruits of the Smilax china, 33.33% of the Hypericum patulum, and 11.11% of the Phytolacca americana were found (χ²=11.444, p =.022). Non-planting materials used in the manufacture of flower jewelry were found to be 47.34% of 2mm aluminium wire, 33.73% of copper wire and 10.06% of 1mm aluminum wire (χ²=186.704, p<.001). The figure was 53.57% for pearls, 12.50% for ribbons, and 4.14% for spangles and feathers.