• E2M - 전기 전자와 첨단 소재
• /
• 제9권8호
• /
• pp.806-812
• /
• 1996

I-V characteristics of ground electrode fabricated using an aluminium scrap are presented. We fabricated several shapes of aluminium scraps and aluminium electrodes. The results show that the current of aluminium electrode increased linearly by the voltage increase. AC breakdown voltage of copper plate electrode was higher than that of aluminium electrode. AC breakdown current of aluminium electrode was higher than that of copper plate electrode. As applied voltage increased, grounding resistance of aluminum electrode decreased linearly.

• Membrane and Water Treatment
• /
• 제9권5호
• /
• pp.301-307
• /
• 2018

In this research work, synthesis of sugarcane bagasse/zinc aluminium biocomposite and apple peel/zinc aluminium biocomposite and their application for removal of Reactive Red-241 and Acid Orange-7, respectively, was studied using various parameters. At pH 2 the sorption was the highest for both dyes. The trend showed that the dye sorption declined by decreasing the biocomposite dose and enhanced by increasing the dye concentration and temperature. Equilibrium was achieved at 60 minutes for Reactive Red-241 onto sugarcane bagasse/zinc aluminium biocomposite and 90 minutes for Acid Orange-7 onto apple peel/zinc aluminium biocomposite.The research data was good fitted to pseudo-2nd-order kinetic model and Langmuir isotherm. FT-IR analysis was used to confirm the biosorption of the selected dyes at the surface of biosorbent through various binding sites. Surface morphology modification of both biocomposites before and after biosorption was inspected through SEM. Crystallinity of biocomposite was examined through XRD analysis. It was implied that sugarcane bagasse/ zinc aluminium biocomposite and apple peel/ zinc aluminium biocomposite are good adsorbents for dyes elimination from aqueous solutions.

• 한국환경과학회지
• /
• 제8권6호
• /
• pp.705-710
• /
• 1999

The fundamental experiments on the phosphorus removal from water were carried out by the batch and continuous reactors which used aluminium and copper plate. In this systems, the phosphorus was removed by aluminium ion generated with the electrochemical interaction (pitting corrosion) of aluminium and copper. In the batch experiments, the efficiencies of phosphorus removal increased when the surfaces of aluminium and copper plate were brushed. The phosphorus removal by aluminium ion was affected the copper plate and NaCI in this system. The optimal pH values were 5 and 6 for the phosphorus removal. The efficiency of phosphorus removal increased with increasing NaCI concentration, surface area of aluminium and copper plate. The $CUSO_4{\cdot}5H_2O$ instead of copper plate could be used as Cu source. The effluent $PO_4-P$ concentration as low as 2 $mg/{\ell}$ could have been obtained during the continuous experiment at HRT of 48 hrs.

• 한국기계가공학회지
• /
• 제10권6호
• /
• pp.56-62
• /
• 2011

In this study, a method for the press forming of rectangular aluminium tube has been proposed. Rectangular aluminium tube has high stiff as the cold steel which can be lighter over 30% weight. It is increased every year by being recycled over 80%. Press die consists of punch, wing-die and holder for aluminium tube bending. When punch is applied with aluminium tube, holder is operated as same punch and wing-die is rotated through hinge. Stress-strain relations and springback are considered by bending angle of aluminium tube. In this study, the behaviors on tubes of square aluminium and rectangular aluminium with different thickness and area are established by the analysis of $DEFORM^{TM}$-3D program. Reducing fuel consumption is expected by using the aluminium tube deformation and it becomes the lightweight through recycling.

• 한국재료학회지
• /
• 제4권2호
• /
• pp.206-212
• /
• 1994

여러가지 화학 조성을 갖는 aluminium titanate mullite복합제는 $AI_2O_3$분말을 알콜 분산용액에서 $Si(OC_2H_5)_4$과 $Ti(OC_2H_5)_4$의 단계적인 가수 분해로 합성되었다. Mullite함량이 20-50vol%인 소결체($1600^{\circ}C$/2h)는 비교적 높은 강도와 낮은 열팽창 계수를 갖는 aluminium titanate를 개발할 수 있는 가능성을 보였다. 이와 같은 결과는 mullite로 인한 aluminium titanate의 입자 크기의 억제와 미세균열에 의하여 얻어졌다. aluminium titanate의 함량이 70-80vol% 복합재료는 우수한 열충격 저항성을 지녔으며 상온 강도는 31-45MPa이었다. 열충격 저항성, 영률, sound velocity화 열팽창 계수가 연구되었다.

• 한국산림과학회지
• /
• 제79권1호
• /
• pp.26-32
• /
• 1990

기내(器內)에서 배양(培養)된 5수종(樹種)의 Populus 류(類)(P. davidiana, P. maximowiczii, P. nigra, P. alba ${\times}$ P. glandulosa, P. nigra ${\times}$ P. maximowiczii)의 줄기를 Aluminium-EDTA가 0, 0.1, 0.2, 0.5, 1.0mM씩 첨가(添加)된 배지(培地)에 배양(培養)시켜 뿌리, 줄기, 잎의 생육(生育)상태를 조사(調査)하여 aluminium 내성(耐性)을 비교 분석하였다. 수종간(樹種間) Aluminium내성(耐性)의 차이(差異)는 비교적(比較的) 심(甚)하게 나타났고, 조사(調査)한 5수종중(樹種中) 사시나무가 가장강한 내성(耐性)을 지닌것으로 나타났다. Al-EDTA가 낮은 농도(濃度)로 첨가(添加)된 배지(培地)에서는 줄기와 뿌리생장에 촉진효과를 나타내는 종도 있었다. 1.0mM의 고농도(高濃度)에서는 사시나무 이외의 수종(樹種)에서는 발근(發根)이 억제되었다. 양버들, 황철, 현사시와 같은 내성(耐性)이 약(弱)한 수종(樹種)에서는 0.1mM의 낮은 농도(濃度)에서도 잎과 줄기에 형태적(形態的)인 변이현상이 나타났다. 양황철은 그 양친(兩親)인 양버들이나 황철보다 줄기생장(生長)에서 내성(耐性)이 증가했다.

• Corrosion Science and Technology
• /
• 제4권6호
• /
• pp.217-221
• /
• 2005

In the present investigation, holographic interferometry was utilized for the first time to monitor in situ the thickness of the oxide film of aluminium samples during anodization processes in boric acid solutions. The anodization process (oxidation) of the aluminium samples was carried out by the technique of the electrochemical impedance spectroscopy(EIS), in different concentrations of boric acid (0.5-5.0% $H_3BO_3$) at room temperature. In the mean time, the real-time holographic interferometry was used to measure the thickness of anodized (oxide) film of the aluminium samples in solutions. Consequently, holographic interferometry is found very useful for surface finish industries especially for monitoring the early stage of anodization processes of metals, in which the thickness of the anodized film of the aluminium samples can be determined without any physical contact. In addition, measurements of electrochemical values such as the alternating current (A.C) impedance(Z), the double layer capacitance($C_{dl}$), and the polarization resistance(Rp) of anodized films of aluminium samples in boric acid solutions were made by the electrochemical impedance spectroscopy(EIS). Attempts to measure electrochemical values of Z, Cdl, and Rp were not possible by holographic interferometry in boric acid especially in low concentrations of the acid. This is because of the high rate of evolutions of interferometric fringes during the anodization process of the aluminium samples in boric acid, which made measurements of Z, Cdl, and Rp are difficult.

• 한국환경보건학회지
• /
• 제27권3호
• /
• pp.99-106
• /
• 2001

A laboratory experiment was performed to investigate phosphorus and nitrogen removal from synthetic wastewater by intermittently activated sludge process packed with aluminium plate. Three continuous experimental systems, I. e. an intermittently activated sludge process(Run A), an intermittently activated sludge process with an aluminium plate packed into the reactor(Run B), and a reactor post stage(Run C) were compared. In the batch experiments, the phosphorus removal time in the reactor packed with copper and aluminium plate simultaneously was faster than that of the reactor packed with only an aluminium plates. However, the reactor packed with only an aluminium plate could be used for phosphorus removal. Move phosphorus was removed with an increase of surface area of aluminium plate and electrolysis(NaCl) concentration. The efficiency of COD and nitrogen removal was not affected in Run B. However, the phosphrus removal efficiency decreased because of reaction products and activated sludge which gradually covered gradually the surface of the aluminium plate. The efficiency of phosphorus removal in Run C was 86.3% at the HRT of 3.2 hours. Especially, the efficiency of phosphorus removal in Run C was higher than that in Run B.

• 마이크로전자및패키징학회지
• /
• 제22권4호
• /
• pp.1-5
• /
• 2015

In high temperature aircraft electronics, aluminium based brazing filler is the prime choice today. Aluminium and its alloys have compatible properties like weight minimization, thermal conductivity, heat dissipation, high temperature precipitation hardening etc. suitable for the aerospace industry. However, the selection of brazing filler for high temperature electronics requires high temperature joint strength properties which is crucial for the aerospace. Thus the selection of proper brazing alloy material, the composition and brazing method play an important role in deciding the final reliability of aircraft electronic components. The composition of these aluminium alloys dependent on the addition of the various elements in the aluminium matrix. The complex shapes of aluminium structures like enclosures, heat dissipaters, chassis for electronic circuitry, in avionics are designed from numerous individual components and joined thereafter. In various aircraft applications, the poor strength caused by the casting and shrinkage defects is undesirable. In this report the effect of various additional elements on Al based alloys and brazing fillers have been discussed.

• 한국생산제조학회지
• /
• 제8권3호
• /
• pp.23-27
• /
• 1999

A lot of electronic parts are used for recent vehicles. If electronic parts break down, it will bring passenger to fatal wound. The very representative trouble of electronic parts is a cut aluminium wire of a hybrid IC. In this study, I analyzed a cause of cut aluminium wire and the main results obtained on this study are summarized as follows; (1) The forces acting on the aluminium wire are because of thermal expansion of a resin. (2) The forces acting on the aluminium wire are obtained by the theoretical analysis and those results are agree well with those of the FEM.