• Journal of Periodontal and Implant Science
• /
• v.31 no.4
• /
• pp.749-763
• /
• 2001

Osseointegrated titanium implants have become an integral therapy for the replacement of teeth lost. For dental implant materials, titanium, hydroxyapatite and alumina oxide have been used, which of them, titanium implants are in wide use today. Titanium is known for its high corrosion resistance and biocompatability, because of the high stability of oxide layer mainly consists of $TiO_2$. With the development of peri-implantitis, the implant surface is changed in surface topography and element composition. None of the treatments for cleaning and detoxification of implant surface is efficient to remove surface contamination from contaminated titanium implants to such extent that the original surface elemental composition. In this sights, the purpose of this study was to evaluate rough surface titanium implants by means of scanning electron microscopy(SEM) and X-ray photoelectron spectroscopy(XPS) with respect to surface appearance and surface elemental composition. Moreover, it was also the aim to get the base for treatments of peri-implantitis. For the SEM and XPS study, rough surface titanium models were fabricated for control group. Six experimental groups were evaluated: 1) long-time room exposure, 2 ) air-powder abrasive cleaning for 1min, 3) burnishing in citric acid(pH1) for 1min, 4) burnishing in citric acid for 3min, 5) burnishing in tetracycline for 1min, 6) burnishing in tetracycline for 3min. All experimental treatments were followed by 1min of rinsing with distilled water. The results were as follows: 1. SEM observations of all experimental groups showed that any changes in surface topography were not detected when compared with control group. (750 X magnification) 2. XPS analysis showed that in all experimental groups, titanium and oxygen were increased and carbon was decreased, when compared with control group. 3. XPS analysis showed that the level of titanium, oxygen and carbon in the experimental group 3(citric acid treatment for 1min, followed by 1min of distilled water irrigation) reached to the level of control group. 4. XPS analysis showed that significant differences were not detected between the experimental group 1 and the other experimental groups except of experimental group 3. The Ti. level of experimental group 2, airpowder abrasive treatment for lmin followed by 1min of saline irrigation, was lower than the Ti. level of tetracycline treated groups, experimental group 5 and 6. From the result of this study, it may be concluded that the 1min of citric acid treatment followed by same time of rinsing with distilled water gave the best results from elemental points of view, and can be used safely to treat peri-implantitis.

• Journal of Conservation Science
• /
• v.25 no.1
• /
• pp.17-24
• /
• 2009

The feasibility of the geopolymer as a cultural asset restoration material was studied by investigating compressive strength and chromaticity change. Metakaolin that was synthesized by calcination of the kaolin at $750^{\circ}C$ for 6 hours was used as a geopolymeric starting material. Kaolin lost its crystallinity and changed into non-crystalline phase during calcination. NaOH solution and water glass were used as an initiator for the geopolymeric reaction. As the concentration of NaOH solution and water glass increased the compressive strength increased. When alumina was substituted with metakaolin, the compressive strength decreased at a small amount of alumina, but increased at a large substitution. For the most composition of geopolymers, the change of chroma values remained within the limit of slight variation after exposure to sunlight for 8 and 100 days. However, even small amount of organic pigment addition increased chroma values of metakaoline. It was shown that geopolymer had excellent chroma value change over epoxy resins.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.3
• /
• pp.116-126
• /
• 2021

Diesel particulate filter (DPF) is a typical application field of cordierite (Mg₂Al₄Si₅O₁₈) honeycomb. Green body for DPF honeycomb was extruded using slurry paste and sintered at the temperature range of 980~1450℃. Quantitative crystal phase analysis was carried out by using Rietveld refinement method for powder XRD data. In conjunction with the quantitative Rietveld analysis, SEM-EDS analysis was carried for the crystal phases (indialite, cordierite, cristobalite, alumina, spinel, mullite, pro-enstatite). After removing amorphous phase on the sintered surfaces by chemical etching method, the shape and composition of the crystal phases can be clearly identified by SEM-EDS method. By combining the Rietveld refinement method and SEM-EDS analysis, crystal phase evolution process in DPF cordierite ceramics could be clarified. In addition, the coefficient of thermal expansion (CTE) of the DPF honeycombs were measured and compared with the calculated CTEs based on the quantitative crystal phase analysis results.

• 한국해양학회지
• /
• v.11 no.2
• /
• pp.64-70
• /
• 1976

Forty four dredged surface sediments from the bottom of the Hwajinpo Lake and its vicinity were investigated in terms of the sedimentary depositional environment. The characteristics of the sedimentary textures, chemistry and clay mineralogy of these sediments were analysed by X-ray diffraction, chemical (EDTA titration and atomic absorption), sieving and pipette techniques. The lake sediments were chiefly mud and the beach sediments were sand. However, the lake sediments from its seaward zone were sand or muddy sand. The textural parameters that is, mean size, sorting value and their pair diagram seems to be characteristic in the area studied. Based on these data it seems to be reasonable thatthe Hwajinpo Lake was developed by the accretion and growth of a barrier spit along the shore investigated. The chief clay minerals identified were kaolinite, muscovite and the presence of vermiculite was believed as minor composition. The major chemical compositions of these sediments, that is, SiO$\sub$2/, Al$\sub$2/O$\sub$3/, Fe$\sub$2/O$\sub$3/, CaO, Na$\sub$2/O and K$\sub$2/O were contained in unit sample. The ratio of alumina to sodium oxide as a chemical index seems to indicate that the inner lake sediments are more mature than the outer one.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.4
• /
• pp.626-633
• /
• 1998

For the fabrication of low temperature cofirable glass/ceramic with high dielectric constant, crystallizing glass [$SiO_2-TiO_2-RO (RO:BaO, CaO:SrO)$] was formed. The glass/ceramic composites were made by mixing this glass and alumina ceramic as filler, and its characteristics was investigated. With this glass compositon, it was possible to fabricate the glass which could be crystallized under $900^{\circ}C$. And it was found that the crystallizing temperature was changed in accordance with the composition of RO in glass. By adding $Bi_2O_3$ as flux, using $Al_2O_3$ as filler and sintering at $860^{\circ}C$, low temperature cofirable glass/ceramic with high dielectric constant was fabricated. The density of that composites was 3.96 g/$\textrm{cm}^3$, dielectric constant was 17 and Q. f was 600.

• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.1
• /
• pp.69-74
• /
• 2006

Thick film $H_2$ sensors were fabricated using $SnO_2$ loaded with $Ag_2O$ and $PtO_x$. The composition that gave the highest sensitivity for $H_2$ was in the weight% ratio of $SnO_2 : PtO_x : Ag_2O$ as 93 : 1 : 6. The nano-crystalline powders of $SnO_2$ synthesized by sol-gel method were screen printed with $Ag_2O$ and $PtO_x$ on alumina substrates. The fabricated sensors were tested against gases like $H_2$, $CH_4$, $C_3H_8$, $C_2H_5OH$ and $SO_2$. The composite material was found sensitive against $H_2$ at the working temperature $130^{\circ}C$, with minor interference of other gases. The $H_2$ gas as low as 100 ppm can be detected by the present fabricated sensors. It was found that the sensors based on $SnO_2-Ag_2O-PtO_x$ system exhibited the high performance, high selectivity and very short response time to $H_2$ at ppm level. These characteristics make the sensor to be a promising candidate for detecting low concentrations of $H_2$.

• Membrane Journal
• /
• v.18 no.2
• /
• pp.176-184
• /
• 2008

Nano-porous ceramic membranes was synthesized by the sol-gel method. Gas permeation of hydrogen and nitrogen was determined by single composition gas. Pore size $0.1{\mu}m$ and porosity 32% of flat type ${\alpha}-Al_2O_3$ substrate was manufactured. An intermediate ${\gamma}-Al_2O_3$ layer with pore size of 4 nm was formed by dip-coating. Polymeric silica sol was synthesized by acid catalyzed hydrolysis and condensation of tetra-ethyl-ortho-silicate. Supported membranes on alumina were prepared by dipping and calcining. He, $N_2$ permeation experiments with nanoporous sol-gel modified supported ceramic membranes were peformed to determine the gas transport characteristics. $He/N_2$ permselectivity around $100{\sim}160$ and helium permeation in the order of $10^{-7}mol/m^2{\cdot}s{\cdot}Pa$ were measured in the temperature range of $303{\sim}363K$.

• Journal of Conservation Science
• /
• v.8 no.1 s.11
• /
• pp.10-15
• /
• 1999

The chemical compositions and microstructure of the punch'ong excavated from Bokwangri, Kangnung were investigated by the scanning electron microscope (SEM) with an energy dispersive X-ray spectrometer (EDS), X-ray diffractometer (XRD), and dilatometer. The compositions of body were $SiO_2(73-78\%),\;Al_2O_3(13-16\%)$, $RO{\cdot}R_2O(4-5\%,\;R=Ca,\;Mg,\;Na,\;K),\;R_xO_y(3-6\%,\;R=Fe,Ti)$ in weight ratio, which were higher silica and flux $(RO{\cdot}R_2O)$ but lower alumina. Owing to the high content$(21-30\%)$ of calcium oxide the glaze is considered lime type. Firing temperature range for the ceramic was presumed to about $1150^{\circ}C$.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.1
• /
• pp.49-53
• /
• 2000

Sodium borate silicate glass of composition $10Na_2O-39B_2O_3-50SiO_2-CoO$ and $20Na_2O-14B_2O_3-65SiO_2-CoO$ were prepared by melting oxide mixtures in alumina crucible at $1210^{\circ}C$ in an electric furance in air for 2h, and then quenching in air. The dielectric behavior of the quenched glasses are the subject of the present work. Properties such as dielectric constant and resistivity as a function frequency and temperature are reported. From the dielectric spectra, the glass phase transition temperature has been found to decrease at a rate $Na_2O$ 20 mol% and the dielectric constants increase with increasing $Na_2O$ content. The frequency dependent resistivity response of glass exhibits a non-Debye type relaxation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.12
• /
• pp.1092-1098
• /
• 2006

The influence of the concentration of precursor solution and the number of solution coatings on the densification of the $Pb(Zr_xTi_{1-x})O_3$ (PZT) thick films was studied. PZT powder and PZT precursor solution were prepared by3 sol-gel method and PZT thick films were fabricated by the screen-printing method on the alumina substrates. The composition of powder and precursor solution were PZT(70/30) and PZT(30/70), respectively. The PZT precursor solution was spin-coated on the PZT thick films. A concentration of a coating solution was 0.5 to 2.0 mol/L[M] and the number of coating was repeated from 0 to 6. The XRD patterns of all PZT thick films shelved typical perovskite polycrystalline structure. The porosity of the thick films was decreased with increasing the number of coatings and 6-time coated films with 1.5 M showed the dense microstructure and thickness of about $60{\mu}m$. The relative dielectric constant of the PZT thick film was increased with increasing the number of solution coatings and the thick films with 1.5 M, 6-time coated showed the 698. The remanent polarization the 1.5 M and 6-time coated PZT thick films was $38.3{\mu}C/cm^2$.