• Economic and Environmental Geology
• /
• v.36 no.2
• /
• pp.141-148
• /
• 2003

We investigated the distribution of sea ice using various microwave remote sensing techniques including radar altimeter, radiometer, and scatterometer data in the part of Drake passage, Antarctica, between the area 45$^{\circ}$-75$^{\circ}$W and 55$^{\circ}$-66$^{\circ}$S. Topex/poseidon radar altimeter data were used to analyze the monthly distribution of sea ice surface area between 1992 and 1999 by using Geo_bad_1 flag or MGDR. From satellite radiometer measurements of DMSP's SSM/I, sea ice concentration was extracted during the period from 1993 to 1996. To select a value of ice concentration, normally ranging from 0 to 100%, that can be used as a critical value of judging the existence for ice, sea ice areas estimated from various ice concentrations of radiometer measurements were correlated with the area estimated from the radar altimeter measurements. As a result, 20% of ice concentration was selected, and, then this value was used to integrate radiometer data with radar altimeter and ERS-1/2 scatterometer data. To indirectly verify the result, the last 20 year's sea ice concentration was correlated with surface temperature data near Esper-anza Observation Station. The two data showed a high correlation coefficient of 0.86. The amount of sea ice and temperature variation were found to be closely related in the study area, and this indirectly verifies the result of this study. We provided a method to judge the existence of sea ice from ice concentration of satellite radiometer data and suggested a method to monitor more detailed temporal and spatial variation of sea ice distribution by integra-tion of various microwave remote sensing techniques.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.35-37
• /
• 2010

To construct precision geoid model, the gravity data having equal distribution and quality is necessary. In previous study, however, the geoid model has low precision since the biased distributed gravity data and some unverified data has been used and the gap between land and ocean exists. Now, the airborne and land gravity data was collected by various survey and the ship-borne gravity data and altimeter data has been achieved. Therefore, the precision geoid model development would be possible. And the GPS/Leveling data obtained by NGII could be used for construction of hybrid geoid in Korea. In this study, the procedure of geoid construction based on airborne, land, ship-borne and altimeter data using Remove-Restore technique will be explained. And the verification of gravimetric geoid and hybrid geoid would be introduced.

• Korean Journal of Remote Sensing
• /
• v.26 no.3
• /
• pp.335-346
• /
• 2010

Recently, ESA (European Space Agency) has launched CryoSAT-2 for polar ice observations. CryoSAT-2 is equipped with a SIRAL (SAR/interferometric radar altimeter), which is a high spatial resolution radar altimeter. Conventional altimeters cannot measure a precise three-dimensional ground position because of the large footprint diameter, while SIRAL altimeter system accomplishes a precise three-dimensional ground positioning by means of interferometric synthetic aperture radar technique. In this study, we developed an efficient SIRAL SARIn mode processing technique to measure a precise three-dimensional ground position. We first simulated SIRAL SARIn RAW data for the ideal target by assuming the flat Earth and linear flight track, and second accessed the precision of three-dimensional geopositioning achieved by the proposed algorithm. The proposed algorithm consists of 1) azimuth processing that determines the squint angle from Doppler centroid, and 2) range processing that estimates the look angle from interferometric phase. In the ideal case, the precisions of look and squint angles achieved by the proposed algorithm were about -2.0 ${\mu}deg$ and 98.0 ${\mu}deg$, respectively, and the three-dimensional geopositioning accuracy was about 1.23 m, -0.02 m, and -0.30 m in X, Y and Z directions, respectively. This means that the SIRAL SARIn mode processing technique enables to measure the three-dimensional ground position with the precision of several meters.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.8
• /
• pp.838-848
• /
• 2014

We present a simulation study of an algorithm for the range and angle of arrival(AOA) estimation with an interferometric synthetic aperture radar(InSAR) altimeter using a real digital elevation model(DEM). We also illustrate a step-by-step procedure of generating raw InSAR data, as well as their range and azimuth compressed data, which is to be used for the subsequent altitude and angle estimation. The AOA is estimated using a deterministic maximum likelihood estimator(DMLE) applied to the first arrived point for each pulse in the compressed data obtained with three antennas. The range bin size and the pulse repetition interval(PRI) are much smaller than the cell size of the DEM used in this study. To make the DEM compatible to the radar parameters, we first generate a higher resolution DEM by linearly interpolating the given DEM. After a brief description of the principle of the InSAR altimeter, the algorithms for altitude and angle estimation are presented, and their performance is assessed through simulation.

• Journal of the Korean earth science society
• /
• v.44 no.2
• /
• pp.135-147
• /
• 2023

Satellite-observed significant wave heights (SWHs), which are widely used to understand the response of the ocean to climate change, require long-term and continuous validation. This study examines the accuracy and error characteristics of SWH observed by nine satellite altimeters in the North Pacific and North Atlantic Ocean for 25 years (1992-2016). A total of 137,929 matchups were generated to compare altimeter-observed SWH and in-situ measurements. The altimeter SWH showed a bias of 0.03 m and a root mean square error (RMSE) of 0.27 m, indicating relatively high accuracy in the North Pacific and North Atlantic Ocean. However, the spatial distribution of altimeter SWH errors showed notable differences. To better understand the error characteristics of altimeter-observed SWH, errors were analyzed with respect to in-situ SWH, time, latitude, and distance from the coast. Overestimation of SWH was observed in most satellite altimeters when in-situ SWH was low, while underestimation was observed when in-situ SWH was high. The errors of altimeter-observed SWH varied seasonally, with an increase during winter and a decrease during summer, and the variability of errors increased at higher latitudes. The RMSEs showed high accuracy of less than 0.3 m in the open ocean more than 100 km from the coast, while errors significantly increased to more than 0.5 m in coastal regions less than 15 km. These findings underscore the need for caution when analyzing the spatio-temporal variability of SWH in the global and regional oceans using satellite altimeter data.

• 한국해양학회지
• /
• v.29 no.4
• /
• pp.383-391
• /
• 1994

Sea surface height geoidal undulation, and gravity anomaly derived from satellite altimeter measurements are described. Assuming mean sea surface height (MSSH) as geoidal undulation, MSSH was converted to gravity anomaly. the result shows that the gravity anomaly derived from satellite altimeter data can be mapped to an accuracy of the surface ship gravity measurements. The data used for the conversion is the two-year mean sea surface height obtained from GEOSAT Exact Repeat Mission. The conversion was carried out using fast Fourier transform with plane approximation. In this process, the so called remove-restore method was employed.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.188-191
• /
• 2008

The Tonle Sap, Cambodia, is a huge lake and periodically flooded due to monsoon climate. The incoming water causes intensive flooding that expands the lake over vast floodplain and wetland consisting mainly of forests and shrubs. Monitoring the water-level change over the floodplain is essential for flood prediction and water resource management. A main objective of this study is flood monitoring over Tonle Sap area using ALOS PALSAR. To study double-bounce effects in the lake, backscattering effect using ALOS PALSAR dual-polarization (HH, HV) data was examined. InSAR technique was applied for detection of water-level change. HH-polarization interferometric pairs between wet and dry seasons were best to measure water level change around northwestern parts of Tonle Sap. The seasonal pattern of water-level variations in Tonle Sap studied by InSAR method is similar to the past and altimeter data. However, water level variation measured by SAR was much smaller than that by altimeter because the DInSAR measurement only represents water level change at a given region of floodplain while altimeter provides water level variation at the central parts of the lake.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.6
• /
• pp.603-610
• /
• 2015

This paper presents a multimodal sensor system that can determine the location of house space by analyzing the postures and heights of the residents. It consists of two sensors: a tilt sensor and an altimeter sensor. The tilt sensor measures the static and dynamic postures of the residents, and the altimeter sensor measures their heights. The sensor system includes a Bluetooth transmitter, and the server receives the measured data and determines the location in the house. We describe the process determining the locations of the residents after analyzing their postures and behaviors from the measured data. We also demonstrate the usefulness of the proposed system by applying it to a real environment.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.2
• /
• pp.282-297
• /
• 2019

Detection of mesoscale oceanic eddies using satellite data can utilize various ocean parameters such as sea surface temperature (SST), chlorophyll-a pigment concentration in phytoplankton, and sea level altimetry measurements. Observation methods vary for each satellite dataset, as it is obtained using different temporal and spatial resolution, and optimized data processing. Different detection results can be derived for the same oceanic eddies; therefore, fundamental research on eddy detection using satellite data is required. In this study, we used ocean color satellite data, sea level altimetry data, and infrared SST data to detect mesoscale eddies in the East Sea and compared results from different detection methods. The sea surface current field derived from the consecutive ocean color chlorophyll-a concentration images using the maximum cross correlation coefficient and the geostrophic current field obtained from the sea level altimetry data were used to detect the mesoscale eddies in the East Sea. In order to compare the eddy detection from satellite data, the results were divided into three cases as follows: 1) the eddy was detected in both the ocean color and altimeter images simultaneously; 2) the eddy was detected from ocean color and SST images, but no eddy was detected in the altimeter data; 3) the eddy was not detected in ocean color image, while the altimeter data detected the eddy. Through these three cases, we described the difficulties with satellite altimetry data and the limitations of ocean color and infrared SST data for eddy detection. It was also emphasized that study on eddy detection and related research required an in-depth understanding of the mesoscale oceanic phenomenon and the principles of satellite observation.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.534-534
• /
• 2006